Gloucestershire · England
Bath chip & crack repair in Coopers Edge, Gloucestershire
Bath repair for Coopers Edge, without a refit. Send us photos for a fixed quote, then we come to you.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Chips along the edge of the bath
Bath repair in Coopers Edge, done in place
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in one visit. Typical jobs include a chip where the taps sit and rust spots around the plughole, in pressed steel enamel, cast iron enamel and roll-top & freestanding.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Coopers Edge (GL3, GL4)
- Area hub
- Gloucestershire
- Warranty
- One year on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Repair or replace in Coopers Edge?
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it takes one visit, and the bathroom stays exactly as it is. Repairs from £95, with every job priced individually. A repair typically costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why book with us
- Dust sheets down, tidy finish
- Honest advice, even when it means no job
- Accredited with CHAS, Constructionline and SafeContractor
- A fixed quote before booking
Read our prices page and guide to resurfacing and replacement costs.
Common questions in Coopers Edge
Is a bath repair durable?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
Something went through my bath. Can it be fixed?
In most cases. Photos of the hole and the underside help us check.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders.
What happens after I send photos?
You’ll get a fixed quote back, normally with dates to choose from. You’re under no obligation.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Can you repair something that’s been repaired before?
In most cases. We remove the old repair before doing a new one, so let us know about it.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
What happens on the day
The work is clean and fairly quiet. We protect the area first, then the job itself takes a few hours. At the end we talk you through how soon it can be used and how to look after it.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the next day.
Before we arrive
- Let us know if it has been repaired before
- Clear toiletries, mats and anything else from around the area
- Make sure the room can be ventilated
Ask for a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
Read more
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
What your bath is made of matters
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
About Coopers Edge
Coopers Edge is about 2 miles east of Gloucester, in Gloucestershire. Jobs in Coopers Edge are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. Coopers Edge is one of 470 towns and villages in Gloucestershire we cover. Our nearest city page is Birmingham, about 45 miles away.
Jobs in GL3 and GL4 work the same way as everywhere else we cover. Local streets include Guan Road, Bird Road and Adams Lane. Being close to the M5, Coopers Edge is easy for our technicians to reach. Nearby, we also work in Hucclecote (1 mile north), Brockworth (1 mile east), Upton St Leonards (1 mile south-west), Cooper's Hill (1 mile south-east) and Little Witcombe (2 miles east). Within a short drive, we also cover Cheltenham (6 miles north-east), Stroud (7 miles south), Tewkesbury (10 miles north), St Paul's (6 miles north-east), Cirencester (13 miles south-east) and Lansdown (6 miles north-east).
Local landmarks in Coopers Edge
We visit homes around Christchurch, Lobley's Drive Park and Henley Bank High School. The closest station to Coopers Edge is Gloucester station, about 2.9 miles north-west of the centre. Well-known places in the area include Gloucester Castle (3.2 miles north-west) and Coney Hill Hospital (1.1 miles west). For a walk, there is Cooper's Hill.
How to look after the repair
So the finish stays in good condition for years:
- Avoid scourers, wire wool and gritty cream cleaners
- Keep metal cans and razors off the surface
- Do not leave a fresh chip for long
- Put a towel in the bath if you’re working above it
There’s nothing special to do after a repair. Avoid bleach-based and gritty cleaners.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
What we are called out for in Coopers Edge
Heavy toiletries are the biggest single cause of chips. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.
It’s worth getting a quote if you see:
- Cracks in an acrylic bath
- An old repair that has yellowed or come loose
- Damage beneath the taps
- Holes from dropped items
What to look for in a quote
- Whether there are any call-out or travel charges
- How long it needs to cure
- What preparation is included
- The length of the guarantee and what it covers
What we can’t put right
Before you book, it’s worth knowing the limits:
- Flexing caused by a failed cradle or loose feet
- Water coming from the waste or taps rather than the bath
- Acrylic cracks with no access behind them
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
Towns and villages near Coopers Edge
What else we do in Coopers Edge
About our accreditations · Every repair comes with a one-year guarantee.
