Argyll and Bute · Scotland
Bath Repair in Inverinan
Our technicians come to Inverinan for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Deep scratches in acrylic
- Chips on the rim or sides
Bath repair at your home in Inverinan
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. A repair stops both. If you’re dealing with scuffs and scratches in the surface and chips caused by builders, we can usually put it right.
The work is covered for a year after we finish. If anything is not right, ring us and we will come back.
- Area
- Inverinan (PA35)
- Area hub
- Argyll and Bute
- Cover
- One year on every repair
- Quote
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
What we’re called out for in Inverinan
Rust typically starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
Common reasons people in Inverinan contact us include:
- Rust by the waste and overflow
- Deep scratches in acrylic
- Damage done while the bathroom was being fitted
- A hole punched through by something heavy
Comparing quotes
- Who will actually do the work
- What aftercare is recommended
- How your room will be protected
- What the guarantee covers, and for how long
Towns and villages near Inverinan
What else we do in Inverinan
About Inverinan
Inverinan is about 29 miles north-west of Helensburgh, in Argyll and Bute. Customers in Inverinan get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Inverinan is one of 118 places in Argyll and Bute where we work. Our nearest city page is Glasgow, about 49 miles away.
We cover every part of PA35 and the streets around it. Neighbouring places we cover include Ardchonnell (4 miles south), Ardbrecknish (5 miles north-east), Inveraray (8 miles south-east), Inbhir Aora (8 miles south-east) and Taynuilt (9 miles north). Further out, we also cover Oban (11 miles north-west), Dunollie (12 miles north-west) and Dunbeg (12 miles north-west). Some remote addresses need extra planning, so it’s best to call first.
Landmarks near Inverinan
A little further out are Innes Chonnel Castle (3.8 miles south). Green spaces nearby include Cruach Mhor and Loch Awe.
Repair or replace in Inverinan?
A new bath brings a chain of other jobs: tiles along the rim generally crack when it comes out, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Our bath repair starts from £95. A repair is priced on what needs doing, not your postcode. The full price is agreed before you book.
Why Inverinan customers choose us
- Nothing taken out or refitted
- Usually one visit, start to finish
- Work done at your home or business
- Straight answers about what a repair can do
Take a look at our prices page or bath cost comparison.
For landlords and businesses
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
For developers and builders, we fix damage before handover. We can visit several plots in one trip.
Questions from Inverinan
Can you repair something that is been repaired before?
Generally, yes. Let us know what was used before.
Can you repair several things at once?
Of course, and it normally saves money. Send pictures of everything together and we will quote them together.
Can you repair a crack in an acrylic bath?
Typically, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a photo.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Inverinan.
Is a bath repair permanent?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
Can you price it without visiting?
Usually, yes. A close-up and a wider photo are enough to give a fixed quote.
What happens once I’ve sent pictures?
You get a fixed price and available dates. If we need another angle, we will ask.
Is it worth repairing rather than replacing?
Normally, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.
What a repair cannot fix
We’ll always be straight with you, so here’s what a repair cannot fix:
- Metal that has corroded all the way through
- A bath worn all over, where resurfacing makes more sense
- Cracks in parts of an acrylic bath we can’t get to from below
Not sure? Send photos and we’ll give you a straight answer before booking.
What we work on
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
What bath repair costs
Repairs from £95. There is no area surcharge for Inverinan. The price reflects:
- How many areas need work
- The colour and finish to match
- Any earlier repairs that need removing first
- Access to the area
A repair typically costs much less than people expect, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Quotes from your photos
Good pictures mean an accurate price. Here’s what we find most useful:
- A coin or ruler next to the damage for scale
- A clear, close picture of the problem area
- A wider photo showing the whole bath
- Your postcode, so we can check dates
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Looking after it afterwards
Good habits make a big difference to how long a repair lasts:
- Get any new chip repaired before it rusts
- Ensure an acrylic bath is firm underfoot
- Store metal items away from the bath
- Do not scrub with anything abrasive
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine without abrasive products.
Do not leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
The process
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Allow a few hours, depending on the damage. Before we go, we will explain how long to leave it and what to avoid for the first few days.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Have a window or extractor fan available
- Mention any parking restrictions or tricky access
- Plan for the room to be out of bounds to pets and children
Getting a price
Send us a photo of the damage and a wider shot of the entire item, with your PA35 postcode, and we’ll come back with a fixed quote.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
