Pembrokeshire · Wales
Bath Repair in Keeston
We travel to Keeston for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Snagging damage from a refit
- Chips on the rim or sides
Should you replace it?
Replacing a bath rarely stops at the bath: tiles along the rim usually crack when it comes out, a new panel is frequently needed, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Our bath repair starts from £95. There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why Keeston clients choose us
- Colours mixed by hand to suit your surface
- Same prices wherever you are
- Rooms protected and left tidy
- Work done at your home or business
See our pricing or guide to resurfacing and replacement costs.
Bath repair in Keeston, done in place
We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath. Most baths can be used again the following day. We work on whirlpool & spa baths, roll-top & freestanding and cast iron enamel, and people most often call us about chips on the rim or sides and rusty patches near the plughole.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back.
- Location
- Keeston (SA62)
- Area hub
- Pembrokeshire
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How to look after the repair
A little care keeps the finish looking good. We recommend:
- Clean with warm water and a mild detergent
- Keep abrasive pads and gritty cleaners away from the bath
- Store metal items away from the bath
- Don’t leave a fresh chip for long
Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Work for landlords and builders
We are used to working with agents and managing companies. Send the address, pictures and access details and we will arrange it.
Landlords, letting agents and housing providers in Keeston use us as well as householders. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
Keeston: your questions answered
Can you quote from pictures?
In nearly every case. If pictures do not show enough, we will ask for another angle.
Is the work guaranteed?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
What happens once I’ve sent pictures?
We come back with a fixed price, plus dates. There is no obligation to book.
Do you repair coloured baths?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
Can you do more than one item on the same visit?
Of course, and it generally saves money. Send pictures of everything together and we will quote them together.
When can you do it?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
How long does the repair take to cure?
Usually the following day. We confirm the time before we leave.
Is there any odour?
There can be some smell while we work. It fades as everything cures.
When we’d advise against a repair
Not everything can be repaired, and we will tell you before we start. We can’t fix:
- Leaking fittings, which need a plumber
- A steel bath rusted through
- Flexing caused by a failed cradle or loose feet
Send us photos and we will tell you honestly.
What we work on
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
What we are called out for in Keeston
Baths take more knocks than people expect: everyday items get dropped into it all the time, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
You may need us if you’ve spotted:
- Snagging damage from a refit
- Scratches you can feel with a fingernail
- An old repair that has yellowed or come loose
- A cracked acrylic bath
Before booking anyone
- How the colour is matched
- Whether cleaning and preparation are in the price
- A fixed quote, and whether VAT is included
- When it can be used again
How the visit works
The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the job itself takes a few hours, depending on the damage. Before we leave, we explain how soon it can be used and how to look after it.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, typically by the day after, the bath is ready to use.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Let us know which floor the room is on
- Plan for the room to be out of bounds to pets and children
How to get a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Related advice
Materials and what they mean for the repair
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour matched, just like other baths.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so repair chips early.
Also near Keeston
Other services in Keeston
Covering Keeston
Keeston is about 4 miles north-west of Haverfordwest, in Pembrokeshire. We visit homes and businesses in Keeston and nearby villages, so nothing has to leave your home. Our repair technicians cover all 223 towns and villages in Pembrokeshire.
Our visits in SA62 are booked in the same way as anywhere else. Streets in the area include West Lane Close, Hill Lane and Brookfield Close, and we cover them all. We also cover the places around Keeston: Simpson Cross (1 mile west), Cuffern (1 mile north), Pelcomb Cross (1 mile south-east), Lambston (2 miles south) and Camrose (2 miles north-east). Larger places within reach include Haverfordwest (4 miles south-east), Milford Haven (8 miles south), Pembroke (12 miles south-east), Pembroke Dock (11 miles south-east), The Marsh (4 miles south-east) and Fishguard (12 miles north).
Around Keeston
For rail, the closest station is Haverfordwest station, about 4.3 miles south-east of the centre. Well-known places in the area include Former County Gaol (3.9 miles south-east) and Withybush General Hospital (3.9 miles east). For a walk, there is Roch Castle.
About our accreditations · Every repair comes with a one-year guarantee.
