Pembrokeshire · Wales
Bath chip & crack repair in Pelcomb Cross, Pembrokeshire
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Pelcomb Cross. Send pictures for a free, fixed quote.
- Repairs from £95
- A failed DIY repair that’s discoloured or lifting
- Scratches you can feel with a fingernail
Pelcomb Cross and the surrounding area
Pelcomb Cross is about 2 miles north-west of Haverfordwest, in Pembrokeshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in 223 places across Pembrokeshire, from the larger towns to small villages.
Every address in SA62 is within our area. Streets in the area include Pelcomb Villas and Pelcomb Drive. We also travel to Pelcomb Bridge (1 mile south-east), Lambston (1 mile south-west), Keeston (1 mile north-west), Camrose (2 miles north) and Simpson Cross (2 miles north-west). Further out, we also cover Milford Haven (7 miles south), Pembroke (11 miles south-east), Pembroke Dock (10 miles south), The Marsh (3 miles south-east), Fishguard (12 miles north) and Green (11 miles south-east).
Near you in Pelcomb Cross
Around Pelcomb Cross, we work in homes near Pelcomb Inn, Church of St Ishmael and Haverfordwest High VC School. For rail, the closest station is Haverfordwest station, about 2.9 miles south-east of the centre. Other landmarks nearby include Withybush General Hospital (2.4 miles east) and Former County Gaol (2.5 miles south-east). Green spaces nearby include Rogeston Mount.
Bath repair at your home in Pelcomb Cross
It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. We regularly repair whirlpool & spa baths, acrylic and cast iron enamel, and common reasons people contact us are rust spots around the plughole and scuffs and scratches in the surface.
Big or small, it’s backed by a one-year guarantee in Pelcomb Cross and across Pembrokeshire.
- Area
- Pelcomb Cross (SA62)
- Area hub
- Pembrokeshire
- Warranty
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What we do, step by step
Nothing needs to be moved out of the room. Everything we use comes in the van with us, lay protective sheets and get going once we’ve agreed what we’re doing. It typically takes a few hours, and you can get on with other things while we are there.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
Before we arrive
- Tell us if there are stairs or a lift
- Clear toiletries, mats and anything else from around the area
- Let us know if it has been repaired before
Ask for a price
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Related advice
Repair or replace: which is better?
Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Prices start from £95. We charge the same wherever you are, with no extra for Pelcomb Cross. The job itself decides the price: how much damage, what it’s made of and how many items.
Why Pelcomb Cross clients choose us
- Every repair guaranteed for a year
- Free fixed quotes from pictures
- Honest advice, even when it means no job
- We leave the room as we found it
Take a look at our prices page or resurfacing vs replacement cost guide.
Can I fix it myself?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.
Questions from Pelcomb Cross
Are there extra charges for Pelcomb Cross?
There is no separate call-out charge. The fixed quote covers the visit and the work.
Is a bath repair permanent?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
What happens if you find more damage?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
Can you repair something that’s been repaired before?
Yes, we frequently do. It can add a little time, which we include in the quote.
What do you need from me?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Can you repair a failed DIY repair?
Yes, we do this often. We strip it out, deal with any rust and repair it again.
I rent my home. Can I book you?
Of course. Ask your landlord first, and we can send them the quote if that helps.
How long does the repair take to cure?
Most baths can be used the following day. We will tell you the exact curing time when we finish.
Keeping it looking good
It’s all simple stuff:
- Rinse it down after each bath
- Protect the bath with a towel when doing jobs nearby
- Don’t leave a fresh chip for long
- Keep metal cans and razors off the surface
Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
What a repair can’t fix
To be straight with you, there are a few things a repair won’t fix:
- Cracks in acrylic we can’t reach from underneath
- Leaking fittings, which need a plumber
- A whole bath that is dull or worn, where a full re-enamel is the better fix
Send us photos and we’ll tell you honestly before booking.
What we work on
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Landlords, letting agents and housing providers in Pelcomb Cross use us as well as householders. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
Places near Pelcomb Cross
What else we do in Pelcomb Cross
Signs you need bath repair in Pelcomb Cross
Heavy toiletries are the biggest single cause of chips. Fittings cause damage too: water collects there, so chips nearby rust quickly.
Clients normally contact us about:
- A cracked acrylic bath
- Scratches you can feel with a fingernail
- Rust by the waste and overflow
- Damage done while the bathroom was being fitted
Before booking anyone
- How changes to the job are handled
- How the room is protected while they work
- The length of the guarantee and what it covers
- A fixed price, and whether VAT is included
About our accreditations · Every repair comes with a one-year guarantee.
