Pembrokeshire · Wales
Bath Repair for Roch homes
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Roch, with a one-year guarantee on every repair.
- Repairs from £95
- Deep scratches in acrylic
- Damage done while the bathroom was being fitted
Looking after it afterwards
Simple care helps the repair last. Our advice:
- Do not leave a fresh chip for long
- Don’t leave razors or cans standing in the bath
- Rinse the bath after use, especially in hard water areas
- Get a dripping tap fixed promptly
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
Stop using the bath if a crack lets water through until it’s repaired. Leaks under a bath can damage floors and ceilings.
About our bath repair in Roch
We’ve repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place. We work on pressed steel enamel, acrylic and roll-top & freestanding, and people most often call us about rust spots around the plughole and holes from dropped items.
Every repair comes with a one-year guarantee, wherever you are in Pembrokeshire.
- Area
- Roch (SA62)
- Area hub
- Pembrokeshire
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Common questions in Roch
How soon can you come?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
Can a cracked acrylic bath be fixed?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
How much does bath repair cost in Roch?
Repairs from £95. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before booking.
What happens once I’ve sent pictures?
We check the damage, the material and your postcode, then reply with a quote.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Something went through my bath. Can it be fixed?
Normally. Photos of the hole and the underside help us check.
Can you repair a chip on a coloured bath?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
Work for landlords and builders
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
Prices and what affects them
Repairs from £95. You won’t pay by the hour. The price depends on:
- Where the damage is and how we get to it
- Any earlier repairs that need removing first
- How much damage there is
- The material and finish
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your photos
Almost every job we do is priced from pictures. This is what we need:
- Natural light rather than flash
- What it’s made of, if you know
- A wider photo showing the whole bath
- Details of any past repairs
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed price back. Quotes are free and you are under no obligation.
When we would advise against a repair
We’ll always be straight with you, so here’s what a repair can’t fix:
- Metal that has corroded all the way through
- Leaks from the waste or overflow fittings (a plumber’s job)
- A bath that moves underfoot, until its support is fixed
If in doubt, send photos and we will say what we think.
Materials we repair
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
About Roch
Roch is about 6 miles north-west of Haverfordwest, in Pembrokeshire. Customers in Roch get the same service as everywhere else we cover: a fixed quote from your photos, then a visit to do the work. Roch is one of 223 towns and villages in Pembrokeshire we cover.
Every address in SA62 is within our area. Whether you live on Church Road, Maes Ffynnon and St Bride's View or a nearby road, we can come to you. We also cover the places around Roch: Cuffern (1 mile east), Simpson Cross (1 mile south-east), Keeston (2 miles south-east), Nolton (2 miles south) and Nolton and Roch (2 miles south). We also work in nearby towns such as Haverfordwest (6 miles south-east), Milford Haven (9 miles south), Pembroke (14 miles south-east), Pembroke Dock (12 miles south-east), The Marsh (6 miles south-east) and Fishguard (11 miles north-east).
Landmarks near Roch
Locally, our jobs take us to homes close to Church of St Mary, Victoria Inn and Roch C.P. School. Nearby you will also find Withybush General Hospital (5.7 miles south-east) and Roch Castle (less than half a mile east). Not far away are Roch Castle.
Repairs by material
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
DIY repairs versus a professional job
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Other services in Roch
Do you need bath repair in Roch?
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, and the damage is not always spotted until later. Snagging repairs like these are a regular job for us.
Keep an eye out for any of the following:
- Rust spots around the plughole
- Snagging damage from a refit
- A cracked acrylic bath
- A failed DIY repair that is discoloured or lifting
What to look for in a quote
- Aftercare advice
- Whether they match the colour on site
- A fixed price, and whether VAT is included
- How the room is protected while they work
What we do, step by step
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Plan for a few hours. Before leaving, we tell you when it can be used and how to care for it.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, generally the following day.
How to prepare
- Keep children and pets away from the room on the day
- Ensure the area is dry
- Mention any parking restrictions or tricky access
How to get a price
The quickest way to a price is to send two or three photos using our quote form or ring us. We will say right away whether it can be repaired.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
