Perth and Kinross · Scotland
Bath chip & crack repair in Kenmore, Perth and Kinross
Fixed-price bath repair in Kenmore and the surrounding area, done in a single visit in most cases.
- Repairs from £95
- Scuffs and scratches in the surface
- Chips under the taps
Bath repair in Kenmore, done in place
A repair fixes just the damaged area and blends it into the rest of the bath, which costs far less than replacing a fitted bath. Most baths can be used again the following day. We regularly repair whirlpool & spa baths, pressed steel enamel and roll-top & freestanding, and people most frequently call us about rust by the waste and overflow and damage beneath the taps.
Every job is backed for twelve months in Kenmore and everywhere else. If something goes wrong with the work, we come back.
- Location
- Kenmore (PH15)
- Region
- Perth and Kinross
- Guarantee
- 12 months on all our work
- Price
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What bath repair costs
Prices start from £95. We price every job individually, from your photos. What matters most is:
- Whether it’s a chip, crack, burn or wear
- Previous DIY repairs that have to come out
- How much damage there is
- How many items we do on one visit
A repair is priced on what needs doing, not your postcode. You will see the full price before booking, with nothing added on the day.
Quotes from your photos
A couple of clear pictures is all it takes. It helps if you send:
- One picture of the whole bath
- Natural light rather than flash
- One sharp close-up of the damage
- The material, if you know it
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so repair chips early.
What we’re called out for in Kenmore
Heavy toiletries are the biggest single cause of chips, closely followed by shower heads. Fittings cause damage too: water sits around them, and any chip there soon rusts.
It’s worth getting a quote if you see:
- An old repair that has yellowed or come loose
- Impact holes in acrylic
- Chips on the rim or sides
- Scratches you can feel with a fingernail
What your quote should include
- Aftercare advice
- How long the guarantee is and what it covers
- When it can be used again
- How the colour is matched
How to care for the repair
How the surface is treated afterwards matters:
- Keep abrasive pads and gritty cleaners away from the bath
- Stick to mild cleaners and a soft cloth
- A dripping tap stains enamel, so fix it early
- If an acrylic bath flexes, have its feet adjusted
Care for the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
Stop using the bath if a crack lets water through. Water under the bath can damage the floor and the ceiling below.
Repair or replace: which is better?
Replacing a fitted bath generally means a plumber, lifting out the old bath, re-tiling and a new panel and getting rid of the old bath. Repairing it deals only with the damage in one visit. Repairs from £95, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Why us?
- Straight answers about what a repair can do
- No extra charge for your area
- One-year guarantee on every repair
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our full price list or resurfacing vs replacement cost guide.
How it works
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Allow a morning or an afternoon. Before leaving, we tell you when it can be used and how to look after it.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can typically use the bath the following day.
How to prepare
- Keep children and pets away from the room on the day
- Make sure the area is dry
- Mention any earlier repairs or resurfacing
Getting a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and no obligation.
Read more
Common questions in Kenmore
What areas do you cover?
The whole UK, including all of Perth and Kinross. Send your postcode with your photos and we will confirm dates.
How much does bath repair cost in Kenmore?
Repairs from £95. Every job gets a fixed quote from your photos. Send a close-up and a photo of the whole item with your PH15 postcode.
Do the materials smell?
There can be some smell while we work, so we ventilate the room. It clears as the materials cure.
Something went through my bath. Can it be fixed?
Usually. Photos of the hole and the underside help us check.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Perth and Kinross.
How invisible is a bath repair?
On a bath in good condition, a colour-matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Is a bath repair permanent?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
How long before I can use the bath?
Usually the day after. We confirm the time before we leave.
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
Landlords, agents and businesses in Kenmore
Landlords, letting agents and housing providers in Kenmore use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Towns and villages near Kenmore
What else we do in Kenmore
Kenmore and nearby
Kenmore is about 24 miles north-west of Perth, in Perth and Kinross. We visit homes and businesses in Kenmore and the surrounding area, so nothing has to leave your home. Kenmore is one of 107 places in Perth and Kinross where we work. We work right across the region, from Kenmore to Glasgow (about 52 miles away).
Jobs in PH15 are booked in the same way as anywhere else. Streets in the area include The Square, Taymouth Drive and Pier Road. Neighbouring places we cover include Acharn (1 mile south-west), Fearnan (3 miles west), Boreland (4 miles west), Aberfeldy (6 miles north-east) and Little Ballinluig (9 miles north-east).
Near you in Kenmore
We visit homes around Kenmore Free Church and the streets around them. Further afield, we also cover the area around Scottish Crannog Centre (0.5 miles south-west) and Taymouth Castle (less than half a mile north). Open spaces near Kenmore include Drummond Hill.
About our accreditations · Every repair comes with a one-year guarantee.
