Perth and Kinross · Scotland
Bath Repair in Acharn
Problem with your bath in Acharn? We put it right where it is, match it on site and guarantee the work for a year.
- Repairs from £95
- Holes from dropped items
- A chip where the taps sit
Prices and what affects them
Repairs from £95. We give every job a fixed quote from photos. These are the things that affect it:
- The material and finish
- How many areas need work
- How many items we do on one visit
- What kind of damage it is
We charge the same wherever you are, with no extra for Acharn. What changes the price is the job itself: the material, the amount of damage and how many items.
Getting a price from photos
You can usually get a fixed price without us visiting. To help us price it:
- A clear, close picture of the problem area
- Where you are, by postcode
- A coin beside the damage so we can judge size
- The material, if you know it
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.
Bath repair in Acharn, done in place
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We’re frequently asked to fix rusty patches near the plughole and damage beneath the taps, in whirlpool & spa baths, roll-top & freestanding and cast iron enamel.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Area
- Acharn (PH15)
- County
- Perth and Kinross
- Warranty
- A year, on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Common problems we fix in Acharn
Dropped items cause the majority of chips, and building work is a common culprit. Acrylic baths crack for a different reason: the bath is not properly supported, so it flexes under weight.
Common reasons people in Acharn contact us include:
- Deep scratches in acrylic
- Holes from dropped items
- A failed DIY repair that is discoloured or lifting
- Damage beneath the taps
What to look for in a quote
- Whether cleaning and preparation are in the price
- When it can be used again
- Who turns up on the day
- What happens if they find more damage
Repair or replace in Acharn?
Replacing a bath rarely stops at the bath: tiles along the rim generally crack when it comes out, a new panel is often needed, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Prices start from £95. A repair is priced on what needs doing, not where you live. You will see the full price before you book, with no extras added later.
Why book with us
- No need to remove anything
- One-year guarantee on every repair
- Accredited with CHAS, Constructionline and SafeContractor
- Dust sheets down, tidy finish
Read our full price list or resurfacing vs replacement cost guide.
Should I try a DIY kit first?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.
Nearby places to Acharn
Other services in Acharn
Our work in Acharn
Acharn is about 25 miles north-west of Perth, in Perth and Kinross. We visit customers in Acharn, so you do not need to take anything anywhere. Acharn is one of 107 places in Perth and Kinross we cover. You can also see our page for Glasgow, about 51 miles away.
Jobs in PH15 work the same way as everywhere else we cover. Other places close to Acharn include Kenmore (1 mile north-east), Fearnan (2 miles west), Boreland (3 miles west), Aberfeldy (7 miles north-east) and Little Ballinluig (11 miles north-east). We also work in nearby towns such as Crieff (15 miles south-east), Pitlochry (14 miles north-east) and Comrie (14 miles south).
Around Acharn
We visit homes around Kenmore Parish Church, among other places. Nearby you will also find Taymouth Castle (1.5 miles north-east) and Scottish Crannog Centre (0.8 miles north-east). For a walk, there is Drummond Hill.
FAQs for Acharn
Can you quote from pictures?
In nearly every case. If pictures do not show enough, we’ll ask for another angle.
Can you redo an old repair?
Yes. We take out the old repair and do it properly. Tell us about it when you send pictures.
When can you do it?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
When can I have a bath again?
Typically within a day, though it depends on what we have done.
How invisible is a bath repair?
We aim for a repair you cannot easily find. The rest of the bath’s condition makes a difference, and we will tell you what to expect.
How much does bath repair cost in Acharn?
Prices start from £95. Every job gets a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo with your PH15 postcode.
Do I need to be at home?
Someone needs to let us in and show us the job. You do not need to watch us work.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Landlord and trade work in Acharn
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
What a repair can’t fix
Honesty matters more than a booking, so here’s what a repair will not do:
- A bath that moves underfoot, until its support is fixed
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Metal that has corroded all the way through
Not sure? Send photos and we’ll give you a straight answer before booking.
What we work on
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
How it works
You don’t need to empty the room beforehand. We bring everything we need with us, put protection down and get going once we’ve agreed what we’re doing. It usually takes a few hours, and you can get on with other things while we are there.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the next day.
Preparing for the visit
- Open a window if you can
- Mention any earlier repairs or resurfacing
- Move bottles, mats and clutter away from the area
Ask for a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them over. You’ll get a fixed quote, not an estimate.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
