Perth and Kinross · Scotland
Bath Repair for Fearnan homes
Bath repair in Fearnan without the cost of replacing. Get a fixed quote from your pictures, then we come to you.
- Repairs from £95
- Deep scratches in acrylic
- A chipped rim or side
Bath repair in Fearnan, done in place
Whatever the damage, the aim is the same: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. If you’re dealing with a chipped rim or side and rust spots around the plughole, we can generally put it right, whatever the material.
All our work comes with our one-year guarantee, wherever you are in Perth and Kinross.
- Area
- Fearnan (PH15)
- Region
- Perth and Kinross
- Warranty
- One year on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath repair
Prices start from £95. Every quote is fixed and free. What we take into account:
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
- How hard the colour is to match
- Access to the area
Compared with replacing, a repair is normally a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
How to get a fixed price
A couple of clear pictures is all it takes. It helps if you send:
- The material, if you know it
- A coin beside the damage so we can judge size
- Daylight if possible, and no flash reflection
- Any earlier repairs or coatings
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Materials and what they mean for the repair
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, in much the same way.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Work for landlords and builders
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Questions from Fearnan
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the photos can’t show what we need.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do you cover Fearnan?
Yes. We work across the UK and travel to Fearnan and the rest of Perth and Kinross. Send us pictures for a fixed quote, or call 0345 017 0787.
Do I have to be there?
We need someone to let us in. You do not need to watch us work.
Can a cracked acrylic bath be fixed?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
What information do you need?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Can you repair several things at once?
Yes. Doing several items on one visit generally costs less than separate visits. Include photos of each item.
Can you repair a failed DIY repair?
Yes. We remove the old filler and start again. Tell us about it when you send pictures.
Common problems we fix in Fearnan
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, and the damage isn’t always spotted until later. Snagging repairs like these are a regular job for us.
Clients generally contact us about:
- An old repair that has yellowed or come loose
- Holes from dropped items
- Cracks in an acrylic bath
- Chips under the taps
Before you book anyone
- How your room will be protected
- Aftercare advice
- Whether the price covers travel
- Whether the colour is mixed to match
Fearnan and nearby
Fearnan is about 27 miles north-west of Perth, in Perth and Kinross. Anywhere in PH15, we come to you. We work in all 107 towns and villages across Perth and Kinross. Our nearest city page is Glasgow, about 50 miles away.
All of PH15 is within our area. Streets in the area include Dalcharian, Tay Sealladh and Tigh na Loan. We also travel to Boreland (1 mile west), Acharn (2 miles east), Kenmore (3 miles east), Aberfeldy (9 miles east) and Kinloch Rannoch (9 miles north-west).
Local landmarks in Fearnan
Nearby you will also find Carnbane Castle (3.4 miles north-west) and Scottish Crannog Centre (3 miles east). For a walk, there’s Lochan nan Uan and Drummond Hill.
Can I fix it myself?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Should you replace it?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Our bath repair starts from £95. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Why book with us
- Rooms protected and left tidy
- One visit for most repairs
- One-year guarantee on every repair
- Straight answers about what a repair can do
See our pricing and resurfacing vs replacement cost guide.
What a repair can’t fix
To be straight with you, there are a few things a repair will not fix:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Cracks in acrylic we can’t reach from underneath
- A bath worn all over, where resurfacing makes more sense
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
How the visit works
You don’t need to empty the room beforehand. Everything we use comes in the van with us, lay protective sheets and start once you are happy with the plan. Most jobs take a morning or an afternoon, and you can get on with other things while we’re there.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, generally by the day after, the bath is ready to use.
Preparing for the visit
- Plan for the room to be out of bounds to pets and children
- Ensure the room can be ventilated
- Let us know if it has been repaired before
How to get a price
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Related advice
What else we do in Fearnan
About our accreditations · Every repair comes with a one-year guarantee.
