North Yorkshire · England
Bath chip & crack repair in Kildale, North Yorkshire
Our technicians come to Kildale for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Cracks in an acrylic bath
- Scratches you can feel with a fingernail
Bath repair in Kildale without replacing anything
We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath. Most baths can be used again the following day. We are often asked to fix scuffs and scratches in the surface and damage done while the bathroom was being fitted, in whirlpool & spa baths, pressed steel enamel and cast iron enamel.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Where
- Kildale (YO21)
- Area hub
- North Yorkshire
- Cover
- 12 months on all our work
- Quotes
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
About Kildale
Kildale is about 4 miles south of Guisborough, in North Yorkshire. Book a date that suits you, and you’ll know when to expect us, so you’re not left waiting in all day. Kildale is one of 626 places in North Yorkshire where we work. Our nearest city page is Newcastle upon Tyne, about 42 miles away.
Jobs in YO21 are booked in the same way as anywhere else. Other places close to Kildale include Battersby (2 miles south-west), Ingleby Greenhow (2 miles south-west), Little Ayton (2 miles west), Hutton Village (3 miles north) and Great Ayton (3 miles west).
Around Kildale
Typical jobs here are in homes near St Cuthbert's Church and the streets around them. There’s a railway station in Kildale itself: Kildale station. Well-known places in the area include Captain Cook's Schoolroom (2.8 miles west) and Castle Hill (5 miles west). For a walk, there’s Easby Moor.
When to call us in Kildale
Rust normally starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
You may need us if you’ve spotted any of these:
- Hairline or through cracks in acrylic
- Snagging damage from a refit
- Deep scratches in acrylic
- Rust by the waste and overflow
Questions to ask before booking
- What prep work is covered
- Who turns up on the day
- Whether there are any call-out or travel charges
- When it can be used again
Aftercare tips
So the finish stays in good condition for years:
- Keep abrasive pads and gritty cleaners away from the bath
- Protect the bath with a towel when doing jobs nearby
- Don’t leave a fresh chip for long
- Check that an acrylic bath does not move when you stand in it
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and water can get through to the floor below.
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Towns and villages near Kildale
What else we do in Kildale
Honest limits
Not everything can be repaired, and we will tell you before we start. We can’t fix:
- Leaking fittings, which need a plumber
- Cracks in parts of an acrylic bath we cannot get to from below
- A bath worn all over, where resurfacing makes more sense
Send us photos and we will tell you honestly.
Materials we repair
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
The process
On the day itself, there is little for you to do. Let us in and show us the room, and we will take it from there. Most visits take a few hours.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Clear toiletries, mats and anything else from around the area
- Let the surface dry out before the visit
Ask for a price
Send us a picture of the damage and a wider shot of the entire item, with your YO21 postcode, and we’ll come back with a fixed quote.
Advice
What bath repair costs
Repairs from £95. There are no hourly rates or hidden extras. The price is based on:
- How easy the damage is to reach
- The material and finish
- Doing more than one item at once
- The size and number of damaged areas
A repair is priced on what needs doing, not your postcode. The full price is agreed before booking, with nothing added on the day.
Getting a price from photos
Almost every job we do is priced from pictures. This is what we need:
- A wider photo showing the whole bath
- A clear, close picture of the problem area
- Your postcode, so we can check dates
- Something in shot to show the size
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs in North Yorkshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Kildale: your questions answered
What do you need from me?
Photos of the damage, a photo of the whole bath and your postcode. After that, we just agree a date.
Are there extra charges for Kildale?
There is no separate call-out charge. The fixed price covers the visit and the work.
How much does bath repair cost in Kildale?
Prices start from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
How quickly can you book me in?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Can you repair a failed DIY repair?
Yes. We remove the old filler and start again. Tell us about it when you send photos.
Is there any odour?
There can be some smell while we work. It clears as the materials cure.
About our accreditations · Every repair comes with a one-year guarantee.
