Stirling · Scotland

Bath Repair in Killearn

Chip and crack repairs to enamel, acrylic and cast iron baths in Killearn, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • Impact holes in acrylic
  • Deep scratches in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Killearn

Bath repair in Killearn without replacing anything

A damaged bath doesn’t have to mean a new bathroom. Our repair technicians fill, shape and refinish the damage, mixing the colour on the day so the repair is hard to spot. If you’re dealing with a kit repair that didn’t last and cracks in an acrylic bath, we can normally put it right, whatever the material.

Every repair is covered by a one-year guarantee.

Rusty chip next to a bath plughole, before and after repair
Where
Killearn (G63)
County
Stirling
Warranty
A year, on every repair
Quote
From £95. Free and fixed, from your photos
Telephone
0345 017 0787
Updated
23 October 2026

Common questions in Killearn

Is a bath repair permanent?

Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps it last.

Is it messy?

No. The work area is masked and covered, and we take our waste away with us.

Do you repair coloured baths?

Yes. The colour is mixed on site to suit your bath, including pastel and older colours.

Can you redo someone else’s repair?

Typically, yes. We remove the old repair before doing a new one, so mention it when you send pictures.

Can you quote from pictures?

In nearly every case. We only ask to see it in person if the pictures can’t show what we need.

Will I be able to see the repair?

We aim for a repair you cannot easily find. The rest of the bath’s condition makes a difference, and we will tell you what to expect.

Do the materials smell?

Expect a mild smell while we’re working that clears as it cures.

Can landlords book you?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Killearn.

How we price bath repair

Prices start from £95. We don’t charge extra for travel to Killearn. The price depends on:

  • Any earlier repairs that need removing first
  • Unusual colours or finishes
  • Where the damage is and how we get to it
  • The material and finish

Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.

Send photos for a quote

You can take the pictures on your phone, there’s no need for anything special. Ensure they show:

  • Daylight if possible, and no flash reflection
  • Something in shot to show the size
  • One picture of the entire bath
  • Any earlier repairs or coatings

Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed price back. There’s no charge for the quote and you’re under no obligation.

Honest limits

Some problems need a builder, plumber or fitter rather than us:

  • Metal that has corroded all the way through
  • Acrylic cracks with no access behind them
  • Leaks from the waste or overflow fittings (a plumber’s job)

Not sure? Send pictures and we will give you a straight answer.

Materials we repair

  • Cast iron enamel
  • Roll-top & freestanding
  • Pressed steel enamel
  • Acrylic
  • Whirlpool & spa baths

What happens on the day

Visits start with a quick look at the job together, so you know exactly what we are doing. Then the area is sheeted and masked and the work begins. You can expect it to take a morning or an afternoon.

  1. We start by looking at the damage and confirming the plan with you.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. We build up the filler in layers, shaping it to the bath.
  4. The colour is tinted by hand until it matches.
  5. Finally, it’s polished to match the shine and left to cure.

How to prepare

  • Make sure the room can be ventilated
  • Let us know which floor the room is on
  • Ensure the area is dry

Ask for a price

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.

Send pictures for a quote

Read more

Landlord and trade work in Killearn

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

Where we work around Killearn

Killearn is about 9 miles north of Bearsden, in Stirling. Anywhere in G63, a technician comes to you. We cover all 55 towns and villages in Stirling. Our jobs stretch from Killearn to Glasgow (13 miles away).

Our visits in G63 are booked in the same way as anywhere else. Streets in the area include The Square, Main Street and Station Road. If you’re just outside Killearn, we cover Boquhan (1 mile north-east), Balfron (2 miles north-east), Croftamie (3 miles west), Drymen (4 miles north-west) and Strathblane (5 miles south-east).

Landmarks near Killearn

We visit homes around Old Parish Church and Graveyard, among other places. A little further out are Killearn Hospital (1 mile south-west) and Ballikinrain (2.7 miles north-east). For a walk, there is Craigallian Loch and Dumgoyne.

Map of Killearn © OpenStreetMap contributors

Aftercare tips

Much of the damage we repair could have been avoided. A few tips:

  • Cover the bath during DIY or decorating
  • Don’t leave razors or cans standing in the bath
  • Rinse the bath after use, especially in hard water areas
  • Avoid scourers, wire wool and gritty cream cleaners

Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.

A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.

Repairing versus replacing in Killearn

A new bath brings a chain of other jobs: tiles along the rim generally crack when it comes out, a new panel is frequently needed, and the plumbing has to be disconnected and refitted. A repair skips all of it. Repairs from £95, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

What you get with us

  • We come to you, anywhere in the UK
  • A year’s guarantee on all work
  • CHAS, Constructionline and SafeContractor accredited
  • We leave the room as we found it

Read our pricing and guide to resurfacing and replacement costs.

DIY kit or professional repair?

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

Signs you need bath repair in Killearn

A cracked acrylic bath usually wasn’t supported properly. Legs that aren’t adjusted, a missing cradle or a soft floor let the bath move until the acrylic gives way.

People generally call us after spotting one of these:

  • Scratches you can feel with a fingernail
  • Holes from dropped items
  • Chips under the taps
  • A chipped rim or side

Comparing quotes

  • Aftercare advice
  • The length of the guarantee and what it covers
  • If travel is included in the price
  • What happens if they find more damage

10 questions to ask before booking

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.