East Dunbartonshire · Scotland
Bath Repair in Bearsden
Damaged bath in Bearsden? We put it right where it is, match it on site and guarantee the work for a year.
- Repairs from £95
- Chips along the edge of the bath
- A kit repair that didn’t last
How we handle bath repair in Bearsden
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. If you are dealing with a chipped rim or side and a cracked acrylic bath, we can usually put it right, on acrylic, roll-top & freestanding and cast iron enamel alike.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we’ll sort it.
- Area
- Bearsden (G61)
- Region
- East Dunbartonshire
- Cover
- A year, on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
When a repair is not the answer
Some problems need a builder, plumber or fitter rather than us:
- Cracks in acrylic we can’t reach from underneath
- A bath worn all over, where resurfacing makes more sense
- Water coming from the waste or taps rather than the bath
If in doubt, send photos and we’ll say what we think before booking.
Surfaces we repair
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
How we price bath repair
Prices start from £95. There is no charge for travel to Bearsden. The price comes down to:
- The type of damage
- The material
- How much damage there is
- Doing more than one item at once
What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Send pictures for a quote
The better the photos, the more accurate the price. Here’s what helps:
- Details of any past repairs
- The material, if you know it
- A picture taken from further back
- A coin beside the damage so we can judge size
Upload photos of the damage and a wider shot of the entire item, and tell us you’re in Bearsden, and we will reply with a fixed price.
Work for landlords and builders
For anyone letting property in or around Bearsden, we can repair and quote for several addresses together. Send photos for each one and we’ll come back with a combined price.
We regularly work with letting and managing agents. Send the address, pictures and access details.
The process
We agree an arrival time beforehand, so you know when to expect us. Once we’re there, the work takes two to three hours for most chips in most cases. The room is left tidy and you will know when it can be used.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can generally use the bath the following day.
Before we arrive
- Mention any earlier repairs or resurfacing
- Keep pets and children out of the room while we work
- Ensure the room can be ventilated
Ask for a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Related advice
Repair or replace: which is better?
People often assume a cracked or chipped bath has to come out. Normally it does not: a proper repair gives it years more use, without the cost and upheaval of replacing it. Prices start from £95. Our prices are the same across the UK, with no extra for Bearsden. The job itself decides the price: the material, the amount of damage and how many items.
Why book with us
- A year’s guarantee on all work
- Free fixed quotes from pictures
- Nothing taken out or refitted
- CHAS, Constructionline and SafeContractor accredited
Read our prices page and bath cost comparison.
Bearsden and the surrounding area
Bearsden is about 5 miles north-west of Glasgow, in East Dunbartonshire. We agree a date that works for you, and you’ll know when to expect us, so there is no waiting around. Our technicians cover 23 places in East Dunbartonshire.
Postcode districts we cover here: G61. Whether you live on Station Road, New Kirk Road and Kirk Lane or anywhere nearby, we can come to you. You’ll find Bearsden on the A81 and A739, which makes it straightforward to reach. We also travel to Westerton (1 mile south), Auchenhowie (1 mile north-east), Drumchapel (2 miles south-west), Blairdardie (2 miles south-west) and Milngavie (2 miles north). We also work in nearby towns such as Kirkintilloch (7 miles east), Bishopbriggs (5 miles east), Lenzie (7 miles east), Lennoxtown (6 miles north-east), Milton of Campsie (7 miles north-east) and Cadder (4 miles east).
What’s near Bearsden
In Bearsden, that means homes near Dawsholm Park, Bearsden Academy and Bearsden and the streets around them. There’s a railway station in Bearsden itself: Bearsden station. Other landmarks nearby include Drumchapel Hospital (1.4 miles south-west) and Renfrew Museum (3.5 miles south-west). Not far away are Castle Hill and Kilmardinny.
Common questions in Bearsden
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across East Dunbartonshire.
How do I get a price for bath repair in Bearsden?
Prices start from £95. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before you book.
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
What do you need from me?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Can you repair a hole in a bath?
Often, if there is access underneath. We back the hole, fill it and refinish the surface.
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
How soon can you come?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
Repairs by material
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, just like other baths.
Places near Bearsden
Other services in Bearsden
Common problems we fix in Bearsden
Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.
Common reasons people in Bearsden contact us are:
- A kit repair that didn’t last
- Chips along the edge of the bath
- Snagging damage from a refit
- Scratches you can feel with a fingernail
Comparing quotes
- How long it needs to cure
- Whether there are any call-out or travel charges
- Is the price fixed, and does it include VAT?
- Whether a trained technician does the job
About our accreditations · Every repair comes with a one-year guarantee.
