Oxfordshire · England
Bath Repair for Kingham homes
Bath repair across Kingham and nearby, done in a single visit in most cases.
- Repairs from £95
- A hole punched through by something heavy
- A failed DIY repair that’s discoloured or lifting
Repair or replace in Kingham?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. If the whole surface is worn, re-enamelling may make more sense, and we will tell you. Repairs from £95, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
What you get with us
- Colours mixed by hand to suit your surface
- CHAS and Constructionline accredited
- A fixed quote before booking
- Same prices wherever you are
Read our prices page and guide to resurfacing and replacement costs.
How we handle bath repair in Kingham
Most of our bath repairs take a few hours, and you can usually bathe again the following day. There’s no need to book a plumber or tiler, because nothing is disconnected. We work on acrylic, whirlpool & spa baths and pressed steel enamel, and people most often call us about scuffs and scratches in the surface and holes from dropped items.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Location
- Kingham (OX7)
- County
- Oxfordshire
- Warranty
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
When we would advise against a repair
In fairness, there are a few things a repair will not fix:
- Flexing caused by a failed cradle or loose feet
- Leaking fittings, which need a plumber
- Rust that has eaten right through a steel bath
If in doubt, send pictures and we’ll say what we think before booking.
Materials we repair
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
FAQs for Kingham
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you redo someone else’s repair?
Most of the time. Tell us what was done before and we will plan for it.
What does bath repair cost?
Repairs from £95. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before booking.
Is repairing better than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Something went through my bath. Can it be fixed?
In most cases. Send us a picture of the hole and one from under the bath if you can.
Do you cover Kingham?
We do. We send a technician to Kingham for every job, and the price is the same as everywhere else.
Do the materials smell?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
Are there extra charges for Kingham?
There is no separate call-out charge. Your fixed quote includes everything.
What happens on the day
Arrival times are agreed in advance, so you’re not left guessing. Once we’re there, the work takes a few hours, depending on the damage for most jobs. The room is left tidy.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, generally by the following day, the bath is ready to use.
Before we arrive
- Ensure the area is dry
- Mention if the room is upstairs or in a flat
- Plan for the room to be out of bounds to pets and children
Get a quote
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Related advice
Work for landlords and builders
We are used to working with agents and managing companies. Just send photos, the address and how to get access and we will arrange it.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Our work in Kingham
Kingham is about 10 miles north of Carterton, in Oxfordshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Kingham is one of 443 places in Oxfordshire we cover. We work right across the region, from Kingham to Birmingham (40 miles away).
Our visits in OX7 work the same way as everywhere else we cover. You’ll find streets such as Station Road, Cozens Lane and Orchard Way, all of which we cover. Being close to the B4450, Kingham is easy for our technicians to reach. Close by, we cover Bledington (1 mile south-west), Adlestrop (2 miles north-west), Lower Oddington (2 miles north-west), Upper Oddington (3 miles north-west) and Chastleton (3 miles north). Further out, we also cover Witney (10 miles south-east), Carterton (10 miles south), Chipping Norton (4 miles north-east), Neithrop (15 miles north-east), Ruscote (15 miles north-east) and Woodstock (13 miles east).
What’s near Kingham
Locally, our jobs take us to homes close to The Wild Rabbit pub, Church of St Andrew and Kingham Primary School, among other places. For rail, the closest station is Kingham station, about 0.7 miles south of the centre. Other landmarks nearby include Chipping Norton Museum (3.9 miles north-east) and Moore Cottage Hospital (5.8 miles west).
Keeping it looking good
Aftercare is simple:
- Store metal items away from the bath
- Keep abrasive pads and gritty cleaners away from the bath
- Get any new chip repaired before it rusts
- Cover the bath during DIY or decorating
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath, avoiding abrasives.
Don’t leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
What bath repair costs
Repairs from £95. There are no hourly rates or hidden extras. The price is based on:
- How much damage there is
- Access to the area
- Unusual colours or finishes
- What kind of damage it is
We charge the same wherever you are, with no extra for Kingham. The job itself decides the price: how much damage, what it’s made of and how many items.
Send photos for a quote
Photographing the damage takes a minute. Try to send:
- A coin beside the damage so we can judge size
- The material, if you know it
- One sharp close-up of the damage
- A wider photo showing the entire bath
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Nearby places to Kingham
Other services in Kingham
Can I fix it myself?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.
About our accreditations · Every repair comes with a one-year guarantee.
