Staffordshire · England
Bath chip & crack repair in Kingsley, Staffordshire
Bath repair for Kingsley, without a refit. Send us pictures for a fixed price, then book a visit.
- Repairs from £95
- Chips caused by builders
- Chips on the rim or sides
Bath repair in Kingsley without replacing anything
Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. We regularly repair cast iron enamel, acrylic and roll-top & freestanding, and people most frequently call us about rust by the waste and overflow and a kit repair that didn’t last.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll come back.
- Where
- Kingsley (ST10)
- Area hub
- Staffordshire
- Cover
- One year on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Questions from Kingsley
Will the price change on the day?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
Is a cracked acrylic bath repairable?
Frequently, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a picture.
Can you repair a hole in a bath?
Typically, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
Is a repair better than a new one?
Typically, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Do you come to Kingsley?
Yes. We cover the entire UK and come to Kingsley and the rest of Staffordshire. Send photos and we will quote, or call 0345 017 0787.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Is a bath repair durable?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps it last.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Materials and what they mean for the repair
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
About Kingsley
Kingsley is about 2 miles north of Cheadle, in Staffordshire. Across the ST10 area, we carry out the work at your property. We cover 512 places across Staffordshire. Our jobs stretch from Kingsley to Manchester (about 33 miles away).
Our technicians cover all of the ST10 postcode area. Whether you live on High Street, Johnson Crescent and Wood Avenue or a nearby road, a technician can come to you. Nearby, we also work in Hazles Cross (1 mile north), Kingsley Holt (1 mile east), Froghall (1 mile north-east), Whiston (2 miles east) and Ipstones (2 miles north). Within a short drive, we also cover Newcastle-under-Lyme (10 miles west), Longton (6 miles west), Stone (11 miles south-west), Leek (6 miles north), Biddulph (10 miles north-west) and Alsager (14 miles west).
Around Kingsley
Locally, our jobs take us to homes close to Wolstanton Grammar School, Church of St Werburgh and St Werburgh's CE (A) Primary School. Kingsley’s nearest station is Blythe Bridge station, roughly 4.8 miles south-west of the centre. Nearby you’ll also find Alton Castle (4.8 miles south-east) and Cheadle Hospital (2.4 miles south). The countryside around Kingsley includes Harston Wood.
Why repair rather than replace?
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, a new panel is frequently needed, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Prices start from £95. The price reflects the work involved, not your postcode. The full price is agreed before booking.
Why book with us
- Typically one visit, start to finish
- CHAS, Constructionline and SafeContractor accredited
- We come to you, anywhere in the UK
- Nothing taken out or refitted
See our full price list and resurfacing vs replacement cost guide.
Signs you need bath repair in Kingsley
Rust typically starts where water sits, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
These are the problems we are asked about most:
- Scuffs and scratches in the surface
- Damage done while the bathroom was being fitted
- A kit repair that didn’t last
- Rusty patches near the plughole
What to look for in a quote
- The length of the guarantee and what it covers
- Whether they match the colour on site
- What prep work is covered
- If travel is included in the price
Towns and villages near Kingsley
Also in Kingsley
Keeping it looking good
Most damage we see is avoidable. These habits help:
- Clean with warm water and a mild detergent
- Get a dripping tap fixed promptly
- Give the bath a quick rinse after use
- Put a towel in the bath if you are working above it
A repaired bath needs no special treatment, beyond gentle cleaning. Skip bleach and gritty creams and rinse after use.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
Honest limits
Before you book, it’s worth knowing the limits too:
- Rust that has eaten right through a steel bath
- Cracks in parts of an acrylic bath we can’t get to from below
- Wear across the entire surface, which needs re-enamelling
Send us photos and we will tell you honestly.
Materials we repair
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
What we do, step by step
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job generally takes a few hours, depending on the damage. We tidy up before we leave and let you know when you can use it again.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, normally the following day.
Before we arrive
- Have a window or extractor fan available
- Move bottles, mats and clutter away from the area
- Tell us about parking, stairs or access
How to get a price
For a price in Kingsley, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Related advice
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Landlord and trade work in Kingsley
Housing associations and facilities teams use us for planned and reactive repairs in Staffordshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we will arrange it.
About our accreditations · Every repair comes with a one-year guarantee.
