Hull · England
Bath chip & crack repair in Kingswood, Hull
Bath repair across Kingswood and nearby, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Rust spots around the plughole
Bath repair in Kingswood without replacing anything
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We work on acrylic, roll-top & freestanding and pressed steel enamel, and common reasons people contact us are damage done while the bathroom was being fitted and rusty patches near the plughole.
You’re covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Location
- Kingswood (HU7, HU6, HU17)
- Area hub
- Hull
- Guarantee
- A year, on every repair
- Quote
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
Repairs from £95. There’s no area surcharge for Kingswood. The price reflects:
- The colour and finish to match
- Whether old repairs or coatings need taking off
- Whether it’s a chip, crack, burn or wear
- How many areas need work
The price reflects the work involved, not where you live. The full price is agreed before booking, with nothing added on the day.
How to get a fixed quote
We price nearly every job from photos. This is what to send:
- Good light, ideally daylight, without flash glare
- A coin or ruler next to the damage for scale
- Any details about the material
- One picture of the whole bath
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
How it works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take two to three hours for most chips. We tidy up before we leave and let you know when you can use it again.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, typically by the day after, the bath is ready to use.
How to prepare
- Ensure the room can be ventilated
- Mention any earlier repairs or resurfacing
- Mention if the room is upstairs or in a flat
Getting a price
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Related advice
Looking after it afterwards
Looking after the surface is easy:
- Check that an acrylic bath doesn’t move when you stand in it
- Store metal items away from the bath
- Do not leave a fresh chip for long
- Protect the bath with a towel when doing jobs nearby
Keep metal objects like razors and cans off the surface, as they can leave rust marks. A dripping tap should be fixed early, too.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Remove it before the repair.
What a repair can’t fix
A repair isn’t right for every job, including:
- A bath worn all over, where resurfacing makes more sense
- Cracks in parts of an acrylic bath we cannot get to from below
- Flexing caused by a failed cradle or loose feet
Not sure? Send photos and we will give you a straight answer before you book.
Materials we repair
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
Should you replace it?
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and nothing else in the room changes. Prices start from £95. We do not add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- Fixed prices from your pictures
- Same prices wherever you are
- Colour mixed on the day to match
- Honest advice, even when it means no job
Take a look at our pricing or resurfacing vs replacement cost guide.
Signs you need bath repair in Kingswood
A cracked acrylic bath generally wasn’t supported properly. Legs that aren’t adjusted, a missing cradle or a soft floor let the base flex until it cracks.
Common reasons people in Kingswood contact us are:
- A chipped rim or side
- A kit repair that didn’t last
- Damage beneath the taps
- Snagging damage from a refit
Questions to ask before booking
- Is the price fixed, and does it include VAT?
- What the guarantee covers, and for how long
- What aftercare is recommended
- What happens if the damage is worse than the pictures show
What your bath is made of matters
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so repair chips early.
Can I fix it myself?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Kingswood: your questions answered
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Is a holed acrylic bath repairable?
Often, if there is access underneath. The hole is backed, filled and refinished to match.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
Do you cover the whole of Hull?
Everywhere in the UK, Kingswood included. There’s no extra charge for travel.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Is a bath repair durable?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps it last.
Can rust on a bath be repaired?
Yes, very often. We take it back to sound metal, seal it, fill it and match the colour.
Kingswood and the surrounding area
Kingswood is about 3 miles north of Kingston upon Hull, in Hull. Book a date that suits you, and you’ll know when to expect us, so there is no waiting around. Kingswood is one of 22 towns and villages in Hull we cover. Our nearest city page is Leeds, about 49 miles away.
Every address in HU7, HU6 and HU17 is within our area, from the main roads to the quietest streets. That includes homes on Ings Road, Venn Road and Abbey Lane. We also travel to Dunswell (1 mile west), Wawne (1 mile north), Thearne (1 mile north-west), Woodmansey (2 miles north-west) and Weel (3 miles north-west). Further out, we also cover Kingston upon Hull (3 miles south), Drypool (4 miles south), Stepney (3 miles south), Summergangs (3 miles south-east), Gipsyville (5 miles south) and Southcoates (4 miles south-east).
Landmarks near Kingswood
In Kingswood, that means homes near Sir Henry Cooper School, St Faith's Church and Kingswood Academy and the streets around them. Nearby too are China Red pub (0.8 miles west) and Kingswood Parks Primary School (within half a mile south). For rail, the closest station is Cottingham station, roughly 2.6 miles south-west. Other landmarks nearby include St Stephen's (3.9 miles south) and Kingston General Hospital (3.2 miles south).
Places near Kingswood
More services for Kingswood
About our accreditations · Every repair comes with a one-year guarantee.
