Hull · England

Bath chip & crack repair in Southcoates, Hull

Problem with your bath in Southcoates? We repair it in place, match it on site and guarantee the work for a year.

  • Repairs from £95
  • An old repair that has yellowed or come loose
  • Scuffs and scratches in the surface
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Southcoates homes

Bath repair in Southcoates, done in place

We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath and the tiles around it. Most baths can be used again the following day. If you’re dealing with cracks in an acrylic bath and chips caused by builders, we can generally put it right, on acrylic, whirlpool & spa baths and cast iron enamel alike.

All our work comes with a one-year guarantee, wherever you are in Hull.

Area
Southcoates (HU9, HU8)
Area hub
Hull
Cover
One year on every repair
Price
From £95. Free and fixed, from your pictures
Phone
0345 017 0787
Page updated
23 October 2026
Before and after: a damaged acrylic bath corner repaired in place

What we do, step by step

On the day itself, there is little for you to do. Show us the job, point us to the room, and we will get on with it. The job generally runs to a few hours, including clearing up.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. The chip or crack is filled, then sanded level with the bath.
  3. The colour is mixed on the spot to match your bath.
  4. We apply the finish coats and polish the repair so it blends in.
  5. Once it has cured, typically by the next day, the bath is ready to use.

Before we arrive

  • Tell us about parking, stairs or access
  • Avoid using the area for a few hours before we arrive
  • Open a window if you can

Ask for a price

You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

Get a free quote

Read more

What affects the price in Southcoates

Prices start from £95. Every quote is fixed and free. What we look at:

  • The type of damage
  • Previous DIY repairs that have to come out
  • The material and finish
  • How much damage there is

Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it.

Quotes from your photos

When you take your pictures, a few simple things make all the difference:

  • Natural light rather than flash
  • A close-up of the damage, in focus
  • Any details about the material
  • A wider photo showing the whole bath

Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.

Should you replace it?

If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. If the whole surface is worn, re-enamelling may make more sense, and we will tell you. Our bath repair starts from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.

Why Southcoates customers choose us

  • Honest advice, even when it means no job
  • We leave the room as we found it
  • Colours mixed by hand to suit your surface
  • A fixed quote before booking

Take a look at our pricing and guide to resurfacing and replacement costs.

Work for landlords and builders

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

We are used to working with agents and managing companies. Send the address, photos and access details.

What we cannot put right

We won’t take on work that will not last, so here’s what a repair can’t put right:

  • Cracks in acrylic we can’t reach from underneath
  • Leaking fittings, which need a plumber
  • A bath worn all over, where resurfacing makes more sense

Not sure? Send pictures and we’ll give you a straight answer before booking.

Surfaces we repair

  • Pressed steel enamel
  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Cast iron enamel
  • Acrylic

Your questions about bath repair in Southcoates

Is it safe with children and pets around?

On the day, the room should be kept clear of pets and children, so the repair is not disturbed while it cures.

Can you quote from photos?

Generally, yes. A close-up and a wider photo are enough to give a fixed quote.

How long does the repair take to cure?

Most baths can be used the next day. We confirm the time before we leave.

Can a cracked acrylic bath be fixed?

Most of the time. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.

Can you match an avocado or pink bath?

Yes. The colour is mixed on site to suit your bath, including pastel and older colours.

What does bath repair cost?

Repairs from £95. We give a fixed price based on pictures of the damage. Send a close-up and a picture of the entire item and your postcode.

Will the price change on the day?

It’s rare, but if it happens we talk to you first. You decide whether to go ahead.

What about rust by the waste?

Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.

Signs you need bath repair in Southcoates

The usual cause is something heavy dropped into the bath, and building work is a common culprit. Cracks in acrylic have a different cause: the bath is not properly supported, so it flexes under weight.

Common reasons people in Southcoates contact us include:

  • An old repair that has yellowed or come loose
  • Damage done while the bathroom was being fitted
  • Rust spots around the plughole
  • A hole punched through by something heavy

What your quote should include

  • Whether they match the colour on site
  • How to look after the finish
  • A fixed price, and whether VAT is included
  • If travel is included in the price

How to compare quotes

About Southcoates

Southcoates is about 2 miles east of Kingston upon Hull, in Hull. Whether you’re in the middle of Southcoates or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in all 22 towns and villages across Hull. Our jobs stretch from Southcoates to Leeds (51 miles away).

All of HU9 and HU8 is within our area, from the main roads to the quietest streets. From Tin Lane, Kedrum Road and Farndale Avenue or a nearby road, we can come to you. You will find Southcoates on the A165, which makes it straightforward to reach. We also cover the places around Southcoates: Marfleet (1 mile east), Bilton Grange Estate (2 miles north-east), Longhill (2 miles north-east), Bilton (2 miles north-east) and Salt End (3 miles east). Within a short drive, we also cover Kingswood (4 miles north-west), Gipsyville (4 miles west), Newland (3 miles west), East Ella (5 miles west), Inglemire (4 miles west) and Anlaby Park (5 miles west).

Near you in Southcoates

Typical jobs here are in homes near The Mill Public House, Malet Lambert High School and Wilberforce College. You will also find East Park (0.6 miles north-west), St Aidan's (within half a mile north) and Southcoates Primary Academy (within half a mile south-east). The nearest railway station is Hull station, about 2.4 miles south-west. Further afield, we also cover the area around Princes Quay (2.1 miles south-west) and Princess Royal Hospital (1.4 miles north-east).

Map of Southcoates © OpenStreetMap contributors

Aftercare tips

Nothing complicated is needed, just a few sensible habits:

  • Fix dripping taps early to stop staining and limescale
  • Ensure an acrylic bath is firm underfoot
  • Rinse it down after each bath
  • Have new chips seen to early

Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust sets in.

Stop using the bath if a crack lets water through until it’s repaired. Water under the bath can damage the floor and the ceiling below.

Different materials, different repairs

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.