Denbighshire · Wales
Bath Repair in Kinmel Bay
Fixed-price bath repair in Kinmel Bay and the surrounding area, normally in one visit.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Chips along the edge of the bath
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
Bath repair at your home in Kinmel Bay
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in one visit. If you’re dealing with a kit repair that didn’t last and chips under the taps, we can help.
We stand behind the work with a one-year guarantee.
- Location
- Kinmel Bay (LL18)
- County
- Denbighshire
- Warranty
- A year, on every repair
- Quote
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Covering Kinmel Bay
Kinmel Bay (Welsh: Bae Cinmel) is about 2 miles west of Rhyl, in Denbighshire. Jobs in Kinmel Bay are booked in like any other job: a fixed quote from your photos, then a visit to do the work. Kinmel Bay is one of 81 places in Denbighshire where we work. We work right across the region, from Kinmel Bay to Liverpool (25 miles away).
Our visits in LL18 work the same way as everywhere else we cover. Jobs here include addresses on Trem Elwy, Roseview Crescent and Trem-y-Ffair and the roads around them. Close by, we cover Towyn (1 mile south-west), Rhyl (2 miles east), Belgrano (2 miles south-west), Rhuddlan (2 miles south-east) and Pen-y-ffordd (2 miles east). Within a short drive, we also cover Prestatyn (5 miles east), Denbigh (10 miles south-east), Fron (9 miles south-east), Copenhagen (9 miles south-east), Bryn Seion (9 miles south-east) and Lenten Pool (9 miles south-east). Kinmel Bay is one of the larger places we cover in Denbighshire.
Near you in Kinmel Bay
We visit homes around Ysgol Maes Owen, Church of Saint John and Blessed Edward Jones RC High School, among other places. Kinmel Bay’s nearest station is Rhyl station, about 1.3 miles north-east of the centre. Other landmarks nearby include Rhyl Museum (1.4 miles north-east) and Royal Alexandra Hospital (1.9 miles north-east). Open spaces near Kinmel Bay include Marine Lake and The Warren.
Honest limits
In fairness, there are a few things a repair won’t fix:
- Cracks in parts of an acrylic bath we can’t get to from below
- A bath worn all over, where resurfacing makes more sense
- A steel bath rusted through
Send us pictures and we’ll tell you honestly before booking.
Surfaces we repair
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
Different materials, different repairs
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, just like other baths.
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.
What else we do in Kinmel Bay
Kinmel Bay: your questions answered
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Can I get a quote without a visit?
Typically, yes. A close-up and a wider photo are enough to give a fixed quote.
Are there extra charges for Kinmel Bay?
Travel is included in the price, and we charge the same wherever you are.
Can you redo someone else’s repair?
Yes, we often do. Removing the old work can add time, and that’s in the quote.
Do you cover Kinmel Bay?
Yes, we do. We send a technician to Kinmel Bay for every job, and the price is the same as everywhere else.
What areas do you cover?
All of Denbighshire, and the rest of the UK. Travel is included in the price.
Can I add another job to the visit?
Yes. Doing several items on one visit usually costs less than separate visits. Send pictures of everything you’d like done.
How much does bath repair cost in Kinmel Bay?
Prices start from £95. We give a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Work for landlords and builders
We are used to working with agents and managing companies. Send the address, photos and access details and we will arrange it.
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
Why repair rather than replace?
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. A repair keeps it in place. Repairs from £95, with every job priced individually. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why choose Surface Doctor in Kinmel Bay
- Colours mixed by hand to suit your surface
- Normally one visit, start to finish
- A fixed quote before you book
- Dust sheets down, tidy finish
Take a look at our pricing or resurfacing vs replacement cost guide.
Aftercare tips
Looking after the surface is easy, and it makes a real difference:
- Keep abrasive pads and gritty cleaners away from the bath
- Rinse the bath after use, especially in hard water areas
- Get any new chip repaired before it rusts
- Get a dripping tap fixed promptly
Don’t leave razors, cans or hair grips in the bath, because they can mark the enamel. And fix dripping taps promptly.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
How the visit works
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours, depending on the damage. We tidy up before we leave and let you know when you can use it again.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can normally use the bath the next day.
How to prepare
- Let us know if it has been repaired before
- Clear the area around the damage
- Have a window or extractor fan available
Getting a price
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Read more
What bath repair costs
Repairs from £95. You won’t pay by the hour. The price is based on:
- How easy the damage is to reach
- Any earlier repairs that need removing first
- How many areas need work
- Doing more than one item at once
Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Getting a price from pictures
We price nearly every job from photos. This is what to send:
- Details of any past repairs
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
- What it’s made of, if you know
To get a price, send two or three pictures through our quote form or call us. We’ll say straight away whether it can be repaired.
About our accreditations · Every repair comes with a one-year guarantee.
