Wiltshire · England
Bath chip & crack repair in Lacock, Wiltshire
Bath repair for Lacock, without a refit. Send us photos for a fixed price, then we come to you.
- Repairs from £95
- Snagging damage from a refit
- A hole punched through by something heavy
Your questions about bath repair in Lacock
Can you repair something that’s been repaired before?
In most cases. We remove the old repair before doing a new one, so mention it when you send photos.
Will I be able to see the repair?
We aim for a repair you can’t easily find. The rest of the bath’s condition makes a difference.
What happens after I send photos?
We review the pictures and send a fixed quote.
Is a bath repair permanent?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
Can you repair a hole in a bath?
Usually, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
Can rust on a bath be repaired?
Yes, very often. We take it back to sound metal, seal it, fill it and match the colour.
What information do you need?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
How long before I can use the bath?
Typically within a day, though it depends on what we’ve done.
How we handle bath repair in Lacock
A typical bath repair is a few hours’ work, and the bath is back in use the day after. There is no need to book a plumber or tiler, because nothing is disconnected. Whether it’s impact holes in acrylic and snagging damage from a refit, we can normally put it right, on acrylic, whirlpool & spa baths and pressed steel enamel alike.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Location
- Lacock (SN15)
- Area hub
- Wiltshire
- Guarantee
- One year on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Nearby places to Lacock
What else we do in Lacock
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour matched, in much the same way.
Repair or replace: which is better?
A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and nothing else in the room changes. Prices start from £95. The price reflects the work involved, not your postcode. You’ll see the full price before booking.
Why book with us
- We come to you, anywhere in the UK
- Free fixed quotes from pictures
- Honest advice, even when it means no job
- Rooms protected and left tidy
Take a look at our pricing and resurfacing vs replacement cost guide.
Aftercare tips
A little care keeps the finish looking good. Our advice:
- Keep abrasive pads and gritty cleaners away from the bath
- Give the bath a quick rinse after use
- Fix dripping taps early to stop staining and limescale
- Clean with warm water and a mild detergent
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath, avoiding abrasives.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.
What a repair cannot fix
Before you book, it’s worth knowing the limits too:
- Water coming from the waste or taps rather than the bath
- A bath worn all over, where resurfacing makes more sense
- Cracks in acrylic we cannot reach from underneath
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
Landlord and trade work in Lacock
We work for landlords, letting agents and housing providers in Lacock as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
We regularly work with letting and managing agents. Send the address, photos and access details.
Do you need bath repair in Lacock?
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, and the damage is not always spotted until later. We repair snagging damage like this regularly.
People normally call us after spotting one of these:
- An old repair that has yellowed or come loose
- A hole punched through by something heavy
- Rust by the waste and overflow
- Chips on the rim or sides
Comparing quotes
- Whether the colour is mixed to match
- Whether there are any call-out or travel charges
- What protection goes down before work starts
- What aftercare is recommended
What we do, step by step
There’s not much you need to do on the day. Show us the job, point us to the room, and we will take it from there. Most visits take a morning or an afternoon, including clearing up.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the following day.
How to prepare
- Have somewhere for us to park nearby if possible
- Make sure the room can be ventilated
- Let us know about parking or access
Ask for a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Related advice
Where we work around Lacock
Lacock is about 3 miles south of Chippenham, in Wiltshire. We agree a date that works for you, and you’ll know when to expect us, so there is no waiting around. Lacock is one of 425 places in Wiltshire we cover. We work right across the region, from Lacock to Birmingham (74 miles away).
All of SN15 is covered. Jobs here include addresses on Church Street, East Street and Cantax Hill and the roads around them. Nearby, we also work in Reybridge (1 mile north-east), Notton (1 mile north-west), Lackham (1 mile north), Gastard (2 miles west) and Chapel Knapp (2 miles west). Further out, we also cover Trowbridge (8 miles south-west), Chippenham (3 miles north), Calne (5 miles east), Devizes (7 miles south-east), Westbury (11 miles south) and Melksham (3 miles south).
Landmarks near Lacock
Typical jobs here are in homes near The Sign Of The Angel pub, Lacock Abbey and Lacock Church of England Primary School and the streets around them. The nearest railway station is Melksham station, roughly 2.7 miles south of the centre. Well-known places in the area include Corsham (4.3 miles north-west) and Lacock Abbey (under half a mile east). Green spaces nearby include Vincients Wood.
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
About our accreditations · Every repair comes with a one-year guarantee.
