Wiltshire · England

Bath Repair for Reybridge homes

Chip and crack repairs to enamel, acrylic and cast iron baths in Reybridge, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • Chips along the edge of the bath
  • Scuffs and scratches in the surface
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Reybridge

Reybridge and the surrounding area

Reybridge is about 2 miles south of Chippenham, in Wiltshire. Whether you are in the middle of Reybridge or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. We cover all 425 towns and villages in Wiltshire. We work right across the region, from Reybridge to Birmingham (73 miles away).

Postcode districts we cover here: SN15. Other places close to Reybridge include Lackham (1 mile north-west), Lacock (1 mile south-west), Notton (1 mile west), Gastard (2 miles west) and Chapel Knapp (2 miles west). We also work in nearby towns such as Trowbridge (8 miles south-west), Calne (5 miles east), Devizes (8 miles south-east), Westbury (12 miles south), Melksham (3 miles south) and Warminster (15 miles south).

Landmarks near Reybridge

Around Reybridge, we work in homes near Abbeyfield School, Lacock Abbey and The Carpenters Arms. Nearby too are Church of St Stephen (United Reformed and Methodist) (under half a mile south-west) and Lacock Church of England Primary School (0.5 miles south-west). The nearest railway station is Chippenham station, about 2.8 miles north of the centre. Well-known places in the area include Chippenham Community Hospital (2.1 miles north) and Lacock Abbey (0.5 miles south). Not far away are Vincients Wood.

  • Parks and local facilities nearby include North Wiltshire (2.7 miles north)
Map of Reybridge © OpenStreetMap contributors

How we handle bath repair in Reybridge

You don’t need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day so the repair is hard to spot. Common call-outs are for scratches you can feel with a fingernail and rust by the waste and overflow, in acrylic, roll-top & freestanding and whirlpool & spa baths.

You are covered for a year from the day of the repair. If anything is not right, ring us and we will sort it.

Where
Reybridge (SN15)
Region
Wiltshire
Warranty
One year on every repair
Quotes
From £95. Fixed and free, based on pictures
Call
0345 017 0787
Last updated
23 October 2026
Before and after: a chipped, rust-stained bath around the plughole

How the visit works

A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Allow two to three hours for most chips. Before we go, we’ll explain when it can be used and what to avoid for the first few days.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. We mix the colour on the day to match your bath’s exact shade.
  4. We apply the finish coats and polish the repair so it blends in.
  5. We leave it to cure; you can usually use the bath the following day.

How to prepare

  • Keep a parking space free if you can
  • Mention any parking restrictions or tricky access
  • Mention any earlier repairs or resurfacing

Getting a price

Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we will reply with a fixed price. There’s no charge for the quote and you’re under no obligation.

Send photos for a quote

Related advice

What we’re called out for in Reybridge

The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.

The most common problems we’re called about are:

  • A failed DIY repair that is discoloured or lifting
  • Deep scratches in acrylic
  • A chip where the taps sit
  • Chips caused by builders

What your quote should include

  • If travel is included in the price
  • How the colour is matched
  • What prep work is covered
  • How changes to the job are handled

How to compare quotes

How we price bath repair

Repairs from £95. You won’t pay by the hour. The price is based on:

  • How hard the colour is to match
  • The size and number of damaged areas
  • Whether old repairs or coatings need taking off
  • Where the damage is and how we get to it

The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before booking.

How to get a fixed quote

Before you send photos, a few simple things make all the difference:

  • A coin beside the damage so we can judge size
  • Any earlier repairs or coatings
  • A photo taken from further back
  • A close-up of the damage, in focus

No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.

For landlords and businesses

Housing associations and facilities teams use us for planned and reactive repairs in Wiltshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll handle the rest.

What your bath is made of matters

Cast iron

Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so repair chips early.

Keeping it looking good

It’s all simple stuff:

  • Keep metal cans and razors off the surface
  • Don’t scrub with anything abrasive
  • Protect the bath with a towel when doing jobs nearby
  • Rinse the bath after use, especially in hard water areas

Give the repair the full curing time we recommend before running a bath. After that, gentle cleaning keeps it looking good.

Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.

When a repair isn’t the answer

A repair isn’t always the answer, and we will tell you before we start. Repairs won’t solve:

  • Leaking fittings, which need a plumber
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)
  • Rust that has eaten right through a steel bath

Send us photos and we will tell you honestly before booking.

What we work on

  • Pressed steel enamel
  • Cast iron enamel
  • Acrylic
  • Roll-top & freestanding
  • Whirlpool & spa baths

FAQs for Reybridge

Can you repair something that is been repaired before?

Most of the time. Let us know what was used before.

Can rust on a bath be repaired?

Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.

Something went through my bath. Can it be fixed?

Frequently, if there’s access underneath. We back the hole, fill it and refinish the surface.

What happens if you find more damage?

We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.

Will the repair show?

We aim for a repair you can’t easily find. The rest of the bath’s condition makes a difference, and we will tell you what to expect.

I rent my home. Can I book you?

We can work for tenants, landlords or agents. Just ensure the landlord agrees.

Can you match an avocado or pink bath?

Yes, we match coloured baths too. We tint the finish to your bath on site.

How soon can you come?

Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.

Should I try a DIY kit first?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.