Gloucestershire · England
Bath chip & crack repair in Langford, Gloucestershire
Bath repair for Langford, without a refit. Get a fixed quote from your pictures, then book a visit.
- Repairs from £95
- Rust by the waste and overflow
- Impact holes in acrylic

About our bath repair in Langford
Whatever the damage, the aim is the same: a repair that is smooth, sound and hard to spot. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. We work on pressed steel enamel, roll-top & freestanding and cast iron enamel, and the jobs we see most are chips caused by builders and a failed DIY repair that’s discoloured or lifting.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Location
- Langford (GL7)
- Area hub
- Gloucestershire
- Cover
- One year on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026

Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
Looking after it afterwards
Much of the damage we repair could have been avoided. These habits help:
- Keep abrasive pads and gritty cleaners away from the bath
- Use a soft cloth and washing-up liquid for everyday cleaning
- Protect the bath with a towel when doing jobs nearby
- Fix dripping taps early to stop staining and limescale
Keep metal objects like razors and cans off the surface, as they can leave rust marks. And fix dripping taps promptly.
If water is getting through a crack, stop using the bath. Leaks under a bath can damage floors and ceilings.
Covering Langford
Langford is about 4 miles south-west of Carterton, in Gloucestershire. Book a date that suits you, and we’ll give you an arrival time in advance, so there’s no waiting around. Langford is one of 470 towns and villages in Gloucestershire where we work. You can also see our page for Birmingham, about 53 miles away.
Here we cover the GL7 postcode area. From Station Road, Lechlade Road and The Wickets or anywhere nearby, a technician can come to you. Close by, we cover Broughton Poggs (1 mile north-west), Filkins (1 mile north-west), Alvescot (2 miles north-east), Kencot (2 miles north-east) and Shilton (4 miles north). Further out, we also cover Cirencester (14 miles west), Bourton-on-the-Water (12 miles north-west), Chesterton (14 miles west), Fairford (6 miles west), South Cerney (13 miles west) and Stow-on-the-Wold (15 miles north).
Around Langford
Typical jobs here are in homes near St Matthew's Church, The Crown Public House and St Christopher's Church of England School. Further afield, we also cover the area around Longworth Hospital (5 miles south-east) and Swinford Museum (1.1 miles north-west).
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Your questions about bath repair in Langford
What happens after I send photos?
You’ll get a fixed quote back, generally with dates to choose from. You are under no obligation.
Is a bath repair permanent?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Can a cracked acrylic bath be fixed?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
I tried a repair kit. Can you fix it?
Yes, we do this frequently. We strip it out, deal with any rust and repair it again.
What does bath repair cost?
Prices start from £95. Because every job differs, we price from photos. You will get a fixed figure before booking.
Also in Langford
What happens on the day
On the day itself, there’s little for you to do. Let us in and show us the room, and we will take it from there. Most visits take a few hours, including clearing up.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can usually use the bath the next day.
How to prepare
- Avoid using the area for a few hours before we arrive
- Make sure the room can be ventilated
- Tell us about parking, stairs or access
Getting a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.
Read more
Repair or replace: which is better?
Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. A repair keeps it in place. Repairs from £95, with every job priced individually. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your photos, so you know the cost before you book.
Why choose Surface Doctor in Langford
- CHAS and Constructionline accredited
- We will tell you if it’s not worth repairing
- Same prices wherever you are
- Colour mixed on the day to match
Read our pricing or guide to resurfacing and replacement costs.
Honest limits
It helps to know what we can’t do:
- Leaks from the waste or overflow fittings (a plumber’s job)
- A steel bath rusted through
- A bath that moves underfoot, until its support is fixed
Send us pictures and we’ll tell you honestly.
Materials we work on in Langford
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
Common problems we fix in Langford
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, a chip that reaches the metal lets water in, and rust follows.
Look out for any of the following:
- Snagging damage from a refit
- Chips under the taps
- A kit repair that didn’t last
- A chipped rim or side
Comparing quotes
- How long the guarantee is and what it covers
- When it can be used again
- How changes to the job are handled
- How the room is protected while they work
Work for landlords and builders
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
About our accreditations · Every repair comes with a one-year guarantee.

