Nottinghamshire · England
Bath chip & crack repair in Langwith, Nottinghamshire
We travel to Langwith for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Chips caused by builders
- Chips under the taps
FAQs for Langwith
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is my repair covered?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
What happens next?
We review the photos and send a fixed quote with dates.
Is a bath repair permanent?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
What happens if you find more damage?
Your quote covers the damage in the pictures. If there’s more, we’ll tell you before starting.
Can you redo an old repair?
Yes. We remove the old filler and start again. Tell us about it when you send pictures.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Will the repair show?
On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Bath repair at your home in Langwith
Most of our bath repairs take a few hours, and the bath is back in use the next day. There’s no need to book a plumber or tiler, because the bath doesn’t move. We’re often asked to fix a failed DIY repair that’s discoloured or lifting and chips on the rim or sides, in pressed steel enamel, acrylic and whirlpool & spa baths.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Area
- Langwith (NG20)
- Area hub
- Nottinghamshire
- Warranty
- One year on every repair
- Price
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Langwith and nearby
Langwith is about 3 miles east of Bolsover, in Nottinghamshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We cover all 329 towns and villages in Nottinghamshire, from the larger towns to small villages. We work right across the region, from Langwith to Leeds (about 43 miles away).
Here we cover the NG20 postcode area. Jobs here include addresses on Poulter Street, Main Road and Stone Grove. If you are just outside Langwith, we cover Whaley Thorns (1 mile north), Nether Langwith (1 mile south), Upper Langwith (1 mile south-west), Langwith Junction (1 mile south) and Whaley (1 mile north-west). Further out, we also cover Mansfield (6 miles south), Worksop (7 miles north-east), Sutton in Ashfield (7 miles south), Hucknall (13 miles south), Retford (13 miles north-east) and Mansfield Woodhouse (4 miles south).
Landmarks near Langwith
We visit homes around Whaley Thorns Primary School, St Luke and The Jug And Glass Inn and the streets around them. Langwith has its own railway station: Langwith - Whaley Thorns station. Nearby you will also find Norton and Cuckney (2.5 miles east) and Bolsover Hospital (3 miles west).
Prices and what affects them
Prices start from £95. Each job gets its own fixed quote. This is what makes a difference:
- Any earlier repairs that need removing first
- The material and finish
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
How to get a fixed price
Phone photos are fine. Just make sure we can see:
- Whether it’s been repaired or coated before
- Daylight if possible, and no flash reflection
- Where you are, by postcode
- A coin or ruler next to the damage for scale
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.
Honest limits
A repair isn’t always the answer, and we would rather say so up front. Repairs will not solve:
- A bath worn all over, where resurfacing makes more sense
- A bath that moves underfoot, until its support is fixed
- Cracks in acrylic we cannot reach from underneath
Send us photos and we will tell you honestly before booking.
Materials we work on in Langwith
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
Repairs by material
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, in much the same way.
Why repair rather than replace?
A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Repairs from £95, with every job priced individually. We charge the same wherever you are, so there is no premium for Langwith. The job itself decides the price: the material, the amount of damage and how many items.
What you get with us
- A fixed quote before booking
- Everything repaired in place
- Every repair guaranteed for a year
- CHAS and Constructionline accredited
See our full price list or guide to resurfacing and replacement costs.
How to care for the repair
Once the work has cured, treat it gently:
- Use a soft cloth and washing-up liquid for everyday cleaning
- If an acrylic bath flexes, have its feet adjusted
- Put a towel in the bath if you are working above it
- Have new chips seen to early
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
What we do, step by step
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take two to three hours for most chips. We clean up when we’re done and let you know when you can use it again.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the next day.
Preparing for the visit
- Let the surface dry out before the visit
- Keep pets and children out of the room while we work
- Clear toiletries, mats and anything else from around the area
How to get a price
Most customers in Langwith get their price from pictures. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Read more
Places near Langwith
What else we do in Langwith
Do you need bath repair in Langwith?
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the base flex until the acrylic gives way.
Typical reasons for a call-out include:
- Chips along the edge of the bath
- Scuffs and scratches in the surface
- A kit repair that didn’t last
- Chips under the taps
Questions to ask before booking
- How long it needs to cure
- How to care for the finish
- Who turns up on the day
- Is the price fixed, and does it include VAT?
About our accreditations · Every repair comes with a one-year guarantee.
