Cornwall · England
Bath Repair for Lanner homes
Bath repair for Lanner, without a refit. Send us pictures for a fixed price, then book a visit.
- Repairs from £95
- Cracks in an acrylic bath
- Chips along the edge of the bath
How the visit works
On the day itself, there is little for you to do. Let us in and show us the room, and we will get on with it. Most visits take two to three hours for most chips, tidy-up included.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
Before we arrive
- Point us to the nearest place to park
- Ensure the area is dry
- Keep pets and children out of the room while we work
Getting a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Read more
Bath repair in Lanner without replacing anything
We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Common call-outs are for damage done while the bathroom was being fitted and chips along the edge of the bath, across whirlpool & spa baths, pressed steel enamel and cast iron enamel.
We stand behind the work with a one-year guarantee.
- Area
- Lanner (TR16)
- Area hub
- Cornwall
- Cover
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
When we’d advise against a repair
Not everything can be repaired, and we’d rather say so up front. Repairs won’t solve:
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Cracks in acrylic we can’t reach from underneath
- Leaking fittings, which need a plumber
Not sure? Send photos and we will give you a straight answer before you book.
Materials we work on in Lanner
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
What affects the price in Lanner
Repairs from £95. We charge the same across the UK, including Lanner. The price reflects:
- Whether we combine several jobs
- The size and number of damaged areas
- The material
- Whether old repairs or coatings need taking off
We charge the same wherever you are, with no extra for Lanner. The job itself decides the price: how much damage, what it’s made of and how many items.
How to get a fixed price
Almost every job we do is priced from pictures. This is what to send:
- A clear, close picture of the problem area
- A wider photo showing the whole bath
- Your postcode, so we can check dates
- What it’s made of, if you know
To get a price, send a couple of photos through our quote form or ring us. We will say immediately whether it can be repaired.
How to care for the repair
Looking after the surface is easy, and it makes a real difference:
- Fix dripping taps early to stop staining and limescale
- Clean with warm water and a mild detergent
- Get any new chip repaired before it rusts
- Protect the bath with a towel when doing jobs nearby
A repaired bath needs no special treatment, beyond gentle cleaning. Avoid bleach-based and gritty cleaners and give it a rinse after each bath.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
Also near Lanner
What else we do in Lanner
Questions from Lanner
I’m a tenant. Can you help?
Of course. Check with your landlord; we can send the quote to them too.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
What happens once I’ve sent photos?
We check the damage, the material and your postcode, then reply with a quote.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
When can I have a bath again?
Normally by the following day, though it depends on what we’ve done.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Do you cover Lanner?
Yes, we do. We send a technician to Lanner for every job, with no extra charge for travel.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
Common problems we fix in Lanner
A cracked acrylic bath generally wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the base flex.
Send us a photo if you notice any of these:
- A hole punched through by something heavy
- A kit repair that didn’t last
- Chips caused by builders
- Scuffs and scratches in the surface
Before you book anyone
- What aftercare is recommended
- Whether cleaning and preparation are in the price
- Whether they match the colour on site
- How the room is protected while they work
Where we work around Lanner
Lanner is about 2 miles south-east of Redruth, in Cornwall. Our repair technicians come to customers in Lanner, so nothing has to leave your home. Lanner is one of 644 places in Cornwall we cover.
All of TR16 is within our area. From Lanner Square, Ankervis Lane and Tayberry Drive or anywhere nearby, a technician can come to you. We also cover the places around Lanner: Pennance (1 mile north-west), Busveal (1 mile north), Church Town (2 miles north-west), Redruth (2 miles north-west) and Carnkie (2 miles west). We also work in nearby towns such as Truro (7 miles north-east), Newquay (15 miles north-east), Falmouth (7 miles south-east), Camborne (4 miles west), Helston (8 miles south) and Hayle (9 miles west).
Local landmarks in Lanner
Locally, our jobs take us to homes close to Lanner Primary School, Christchurch Lanner and Redruth School and the streets around them. For rail, the closest station is Redruth station, roughly 1.6 miles north-west. A little further out are Carn Brea Castle (1.9 miles west) and Camborne Redruth Community Hospital (2.1 miles north-west). The countryside around Lanner includes Carnmenellis.
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Why repair rather than replace?
Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Our bath repair starts from £95. A repair is priced on what needs doing, not your postcode. You’ll see the full price before booking.
What you get with us
- Free fixed quotes from pictures
- One visit for most repairs
- Straight answers about what a repair can do
- Technicians who travel to you, UK-wide
Read our full price list and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
