Cheshire West and Chester · England
Bath Repair in Larkton
Bath repair across Larkton and nearby, usually in one visit.
- Repairs from £95
- An old repair that has yellowed or come loose
- Damage beneath the taps
Bath repair in Larkton, done in place
We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath and the tiles around it. Most baths can be used again the next day. Whether it’s impact holes in acrylic and rust by the waste and overflow, we can usually put it right.
We stand behind the work with a one-year guarantee, so you are not left on your own once we’ve gone.
- Area
- Larkton (CH3, SY14)
- Region
- Cheshire West and Chester
- Warranty
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Common problems we fix in Larkton
A cracked acrylic bath typically wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the base flex until the acrylic gives way.
Signs it’s time to call us include:
- Impact holes in acrylic
- A chip where the taps sit
- A kit repair that didn’t last
- Snagging damage from a refit
Before booking anyone
- Whether they match the colour on site
- Who will actually do the work
- How to look after the finish
- When it can be used again
Prices and what affects them
Prices start from £95. A fixed quote means you know the cost before you book. We look at:
- How many items we do on one visit
- The material and finish
- Any earlier repairs that need removing first
- The type of damage
We charge the same wherever you are, so there is no premium for Larkton. What changes the price is the job itself: the material, the amount of damage and how many items.
Send pictures for a quote
You can typically get a fixed quote without us visiting. To make it quick:
- A close-up of the damage, in focus
- Your postcode, so we can check dates
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
The quickest way to a price is to send two or three photos using our quote form or ring us. We will say right away whether it can be repaired.
What we cannot put right
A repair is not right for every job, for example:
- Flexing caused by a failed cradle or loose feet
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Rust that has eaten right through a steel bath
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
Questions from Larkton
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Cheshire West and Chester.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
What do you need from me?
Send photos through the quote form or call 0345 017 0787, and we will take it from there.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Is there any odour?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
When can I have a bath again?
Typically the following day. We’ll tell you the exact curing time when we finish.
What areas do you cover?
The whole UK, including all of Cheshire West and Chester. Send your postcode with your photos and we will confirm dates.
Can tenants book a repair?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Repairing versus replacing in Larkton
Think about the hidden costs of a new bath: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Prices start from £95. There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- We come to you, anywhere in the UK
- Nothing taken out or refitted
- Same prices wherever you are
- CHAS, Constructionline and SafeContractor accredited
Read our full price list and resurfacing vs replacement cost guide.
Aftercare tips
Most damage we see is avoidable. These habits help:
- Rinse the bath after use, especially in hard water areas
- If an acrylic bath flexes, have its feet adjusted
- Get any new chip repaired before it rusts
- Do not leave razors or cans standing in the bath
Keep metal objects like razors and cans off the surface, as they can leave rust marks. And fix dripping taps promptly.
Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
DIY repairs versus a professional job
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Places near Larkton
Also in Larkton
Our work in Larkton
Larkton is about 8 miles north-west of Whitchurch, in Cheshire West and Chester. Across the CH3 area, we come to you. Our repair technicians cover 224 places across Cheshire West and Chester. You can also see our page for Liverpool, about 24 miles away.
Our technicians cover all of CH3 and SY14 and the streets around it. Nearby, we also work in Duckington (1 mile south-west), Brown Knowl (1 mile north), Bickerton (1 mile east), Fuller's Moor (1 mile north) and Barnhill (1 mile north). We also work in nearby towns such as Chester (10 miles north-west), Winsford (12 miles north-east), Boughton (10 miles north-west), Hoole (10 miles north-west), Hartford (15 miles north-east) and Newtown (10 miles north-west).
Landmarks near Larkton
We visit homes around Holy Trinity Church and Bickerton Holy Trinity CofE Primary School and the streets around them. Further afield, we also cover the area around Museum of Amusements (3.6 miles north) and Bolesworth Castle (2 miles north). Open spaces near Larkton include Bickerton Hill.
What we do, step by step
The work is clean and fairly quiet. Protection goes down first, then the work takes a few hours. At the end we talk you through the curing time and the aftercare.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Let the surface dry out before the visit
- Have a window or extractor fan available
- Let us know which floor the room is on
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
