Greater Manchester · England
Bath Repair for Levenshulme homes
Our repair technicians come to Levenshulme for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- A hole punched through by something heavy
- An old repair that has yellowed or come loose
About Levenshulme
Levenshulme is about 2 miles north-east of Burnage, in Greater Manchester. Across the M19 area, we come to you. We cover all 72 towns and villages in Greater Manchester.
Here we cover the M19, M12 and M18 postcode area. Jobs here include addresses on Alma Road, Broom Lane and Manor Road and the roads around them. Other places close to Levenshulme include Gorton (1 mile north-east), Belle Vue (1 mile north), Reddish (1 mile east), South Reddish (2 miles south-east) and Openshaw (2 miles north-east). Within a short drive, we also cover Wythenshawe (5 miles south-west), Northern Quarter (3 miles north-west), Old Trafford (3 miles west), Chinatown (3 miles north-west), Ancoats (3 miles north-west) and Broughton (5 miles north-west).
Landmarks near Levenshulme
Our customers here include homes close to Chapel Street Primary School, Cedar Mount Academy and Blue Bell Inn, among other places. You will also find Debdale Park (1.4 miles north-east), Church of St Peter (under half a mile south-west) and The Manchester Grammar School (1 mile west). There is a railway station in Levenshulme itself: Levenshulme station. Nearby you’ll also find Elizabeth Gaskell's House (1.8 miles north-west) and Denton West (2.1 miles east). The countryside around Levenshulme includes Boating lake and Unicorn Grocery.
Bath repair in Levenshulme without replacing anything
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, typically in a single visit. We are frequently asked to fix a chipped rim or side and rust spots around the plughole, across pressed steel enamel, whirlpool & spa baths and cast iron enamel.
Big or small, you get the same one-year guarantee in Levenshulme and across Greater Manchester.
- Where
- Levenshulme (M19, M12, M18)
- County
- Greater Manchester
- Cover
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Landlord and trade work in Levenshulme
Builders use us to fix snagging damage before handover. We can visit several plots in one trip.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Signs you need bath repair in Levenshulme
Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, often before anyone notices. We repair snagging damage like this regularly.
Customers typically contact us about:
- Deep scratches in acrylic
- Chips caused by builders
- Rust spots around the plughole
- A cracked acrylic bath
What to look for in a quote
- If travel is included in the price
- How long it needs to cure
- What the guarantee covers, and for how long
- What happens if the damage is worse than the photos show
When we’d advise against a repair
To be straight with you, some problems need a different fix:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Rust that has eaten right through a steel bath
- Leaks from the waste or overflow fittings (a plumber’s job)
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
Repairing versus replacing in Levenshulme
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it takes one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. We charge the same wherever you are, with no extra for Levenshulme. What changes the price is the job itself: the material, the amount of damage and how many items.
Why book with us
- No need to remove anything
- One-year guarantee on every repair
- Free fixed quotes from pictures
- Typically one visit, start to finish
Take a look at our prices page or guide to resurfacing and replacement costs.
Places near Levenshulme
What else we do in Levenshulme
Aftercare tips
It’s all simple stuff, just a few sensible habits:
- If an acrylic bath flexes, have its feet adjusted
- Keep metal cans and razors off the surface
- Don’t scrub with anything abrasive
- Get any new chip repaired before it rusts
Look after the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.
FAQs for Levenshulme
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and we’ll quote them together.
Can you repair a hole in a bath?
Generally, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
How soon can you come?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Are there extra charges for Levenshulme?
No. Our quotes include travel, with the same prices everywhere we work.
Do you cover the whole of Greater Manchester?
Everywhere in the UK, Levenshulme included. There is no extra charge for travel.
Can you repair something that’s been repaired before?
In most cases. We remove the old repair before doing a new one.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Is repairing better than replacing?
Normally, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Different materials, different repairs
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
What happens on the day
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take two to three hours for most chips. We tidy up before we leave and tell you when it’s ready to use.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Have somewhere for us to park nearby if possible
- Avoid using the area for a few hours before we arrive
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
