Flintshire · England

Bath chip & crack repair in Little Mancot, Flintshire

Bath repair across Little Mancot and nearby, typically in one visit.

  • Repairs from £95
  • Rust spots around the plughole
  • A failed DIY repair that’s discoloured or lifting
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Little Mancot homes

For landlords and businesses

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

We carry out planned and one-off repairs for housing associations and facilities teams in Flintshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.

About our bath repair in Little Mancot

It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. If you are dealing with damage beneath the taps and a cracked acrylic bath, we can help, on whirlpool & spa baths, cast iron enamel and roll-top & freestanding alike.

Every job is backed for twelve months in Little Mancot and everywhere else. If something goes wrong with the work, we come back.

Area
Little Mancot (CH5)
Region
Flintshire
Guarantee
12 months on all our work
Quote
From £95. Free, fixed price from pictures
Telephone
0345 017 0787
Updated
23 October 2026
Broken acrylic bath corner, rebuilt and refinished (before and after)

How to care for the repair

Once the work has cured, treat it gently:

  • Get any new chip repaired before it rusts
  • Keep abrasive pads and gritty cleaners away from the bath
  • Stick to mild cleaners and a soft cloth
  • Protect the bath with a towel when doing jobs nearby

Don’t leave razors, cans or hair grips in the bath, because they can mark the enamel. A dripping tap should be fixed early, too.

Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.

What we are called out for in Little Mancot

Dropped items cause the majority of chips, and building work is a common culprit. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.

Keep an eye out for these signs:

  • A chipped rim or side
  • Hairline or through cracks in acrylic
  • A kit repair that didn’t last
  • Deep scratches in acrylic

Questions to ask before booking

  • How the room is protected while they work
  • Who will actually do the work
  • What aftercare is recommended
  • When it can be used again

Our hiring checklist

Little Mancot: your questions answered

Is it worth repairing rather than replacing?

Generally, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.

Can you redo someone else’s repair?

Yes, regularly. Removing the old work can add time, and that’s in the quote.

Which areas do you work in?

Across the UK. Prices don’t change with location.

Is it safe with children and pets around?

Yes, as long as they stay out of the room we’re working in. We’ll let you know when it’s safe to use again.

Will the repair show?

The goal is a repair that blends in. The rest of the bath’s condition makes a difference, and we’ll tell you what to expect.

Can landlords book you?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Little Mancot.

I rent my home. Can I book you?

Of course. Ask your landlord first, and we can send them the quote if that helps.

How do I get a price for bath repair in Little Mancot?

Prices start from £95. We give a fixed price from your pictures. Send a close-up and a photo of the whole item and your postcode.

Prices and what affects them

Prices start from £95. Each job gets its own fixed quote. These are the things that affect it:

  • Whether old repairs or coatings need taking off
  • Access to the area
  • The type of damage
  • Whether we combine several jobs

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Getting a price from pictures

Phone photos are fine, there’s no need for anything special. Just make sure we can see:

  • Daylight if possible, and no flash reflection
  • A coin or ruler next to the damage for scale
  • Any details about the material
  • A close-up of the damage, in focus

There’s no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

DIY kit or professional repair?

A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.

What a repair cannot fix

Some problems need a builder, plumber or fitter rather than us:

  • Wear across the whole surface, which needs re-enamelling
  • Leaks from the waste or overflow fittings (a plumber’s job)
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)

Send us pictures and we will tell you honestly.

Materials we work on in Little Mancot

  • Pressed steel enamel
  • Acrylic
  • Cast iron enamel
  • Roll-top & freestanding
  • Whirlpool & spa baths

Our work in Little Mancot

Little Mancot is about 3 miles south-east of Connah's Quay, in Flintshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. We work in 139 places in Flintshire. We work right across the region, from Little Mancot to Liverpool (15 miles away).

Our visits in CH5 are booked in the same way as anywhere else. We regularly work on streets such as Ashlea Close, Grange Court and The Nook and the roads around them. Close by, we cover Big Mancot (1 mile north-west), Mancot Royal (1 mile north-east), The Moor (1 mile south-east), Sandycroft (1 mile east) and Aston (1 mile north-west). We also work in nearby towns such as Connah's Quay (3 miles north-west), Buckley (3 miles south-west), Bwcle (3 miles south-west), Flint (6 miles north-west), Saltney (4 miles east) and Mold (5 miles west).

Near you in Little Mancot

In Little Mancot, that means homes near Wepre Park, Hawarden Village Voluntary Aided C.I.W. Primary and Gladstone's Library, among other places. Other local landmarks include The White Bear pub (less than half a mile north-west), St Deiniol's Church (0.5 miles south-west) and Hawarden High School (1 mile west). The nearest railway station is Hawarden station, roughly 0.7 miles south-west of the centre. Nearby you’ll also find Broughton Shopping Park (2.6 miles south-east) and Connahs Hey Mound (0.8 miles south). Green spaces nearby include Prenbrigog and Shotwick Lake.

  • Other local spots include West Saltney (1 mile east)
Map of Little Mancot © OpenStreetMap contributors

What happens on the day

There’s not much you need to do on the day. Let us in and show us the room, and we will take it from there. The job generally runs to two to three hours for most chips.

  1. We clean the area and remove any loose enamel or rust.
  2. Next we fill the damage and sand it smooth and level.
  3. We mix the colour on the day to match your bath’s exact shade.
  4. Finish coats go on, then the repair is polished to blend in.
  5. The repair is left to cure, and most baths can be used the day after.

Getting ready for the visit

  • Plan for the room to be out of bounds to pets and children
  • Avoid using the area for a few hours before we arrive
  • Have a window or extractor fan available

Getting a price

No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.

Get a free quote

Advice

Different materials, different repairs

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.

Composite and resin

Composite baths are dense and solid. Chips and scratches can be filled and colour matched, just like other baths.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.