Conwy · Wales

Bath Repair for Llanrwst homes

Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Llanrwst and across Conwy. Send photos for a free, fixed quote.

  • Repairs from £95
  • Damage done while the bathroom was being fitted
  • Chips on the rim or sides
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Llanrwst

How we handle bath repair in Llanrwst

Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. We are often asked to fix scuffs and scratches in the surface and a kit repair that didn’t last, in acrylic, whirlpool & spa baths and pressed steel enamel.

You are covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.

Where
Llanrwst (LL26)
County
Conwy
Guarantee
12 months on all our work
Quotes
From £95. Free, fixed quote from pictures
Call
0345 017 0787
Page updated
23 October 2026
Before and after: a damaged acrylic bath corner repaired in place

For landlords and businesses

Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

What affects the price in Llanrwst

Prices start from £95. You will not pay by the hour. The price depends on:

  • How many items we do on one visit
  • Access to the area
  • How hard the colour is to match
  • Whether old repairs or coatings need taking off

Our prices are the same across the UK, so there’s no premium for Llanrwst. What changes the price is the job itself: the material, the amount of damage and how many items.

How to get a fixed quote

Phone photos are fine. Make sure they show:

  • What it’s made of, if you know
  • One sharp close-up of the damage
  • Any earlier repairs or coatings
  • A coin beside the damage so we can judge size

Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and no obligation.

Repair or replace in Llanrwst?

When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. If the whole surface is worn, re-enamelling may make more sense, and we will tell you. Our bath repair starts from £95. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

Why book with us

  • Nothing taken out or refitted
  • We will tell you if it’s not worth repairing
  • Repair technicians who travel to you, UK-wide
  • Colour-matched on site

See our pricing or bath cost comparison.

About Llanrwst

Llanrwst is about 11 miles south of Bae Colwyn, in Conwy. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Llanrwst is one of 75 places in Conwy we cover. Our nearest city page is Liverpool, about 40 miles away.

Every address in LL26 is covered. We regularly work on streets such as School Bank Road, Perthi and Watling Street. Main roads around Llanrwst include the A470 and A548, so getting to you is simple. If you are just outside Llanrwst, we cover Llanddoged (1 mile north), Trefriw (2 miles north-west), Betws-y-Coed (3 miles south), Dolgarrog (4 miles north-west) and Pandy Tudur (4 miles north-east). Within a short drive, we also cover Bae Colwyn (11 miles north), Llandudno (13 miles north), Old Colwyn (11 miles north), Colwyn Bay (11 miles north), Abergele (13 miles north-east) and Colwyn Bay (11 miles north).

Near you in Llanrwst

Around Llanrwst, we work in homes near The Red Lion pub and St Mary's Church and the streets around them. Llanrwst has its own railway station: Llanrwst station. Further afield, we also cover the area around Crwst (0.5 miles north-west) and Llanrwst Almshouses and Museum Trust (within half a mile west). The countryside around Llanrwst includes Parc Uchaf Gwydyr and Llyn Bwrw Eira.

Map of Llanrwst © OpenStreetMap contributors

What we do, step by step

A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Plan for two to three hours for most chips. Before leaving, we tell you when it can be used and how to look after it.

  1. We start by looking at the damage and confirming the plan with you.
  2. Any rust and loose material comes out, and the area is degreased.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. We tint the finish by hand to match the bath.
  5. The repair is polished to the same gloss as the bath and left to cure.

Getting ready for the visit

  • Let us know if it has been repaired before
  • Tell us if there are stairs or a lift
  • Mention any parking restrictions or tricky access

How to get a price

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote.

Send photos for a quote

Related advice

How to care for the repair

A little care keeps the finish looking good. We recommend:

  • Get any new chip repaired before it rusts
  • Avoid scourers, wire wool and gritty cream cleaners
  • Cover the bath during DIY or decorating
  • Do not leave razors or cans standing in the bath

Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.

Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.

Can I fix it myself?

You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

Your questions about bath repair in Llanrwst

Will you leave a mess?

No. The work area is masked and covered, and we leave the room clean.

Will the repair last?

A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps it last.

Can you fix rust around the plughole?

Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.

Can landlords book you?

Yes. We work for landlords, agents, builders and businesses as well as homeowners across Conwy.

Can you repair a failed DIY repair?

Yes. We remove the old filler and start again. Tell us about it when you send photos.

How invisible is a bath repair?

We aim for a repair you can’t easily find. How well it disappears depends on the condition of the rest of the bath, and we’ll tell you what to expect.

What happens if you find more damage?

We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.

Do you cover the entire of Conwy?

All of Conwy, and the rest of the UK. Travel is included in the price.

When we would advise against a repair

Honesty matters more than a booking, so here’s what a repair can’t fix:

  • Wear across the entire surface, which needs re-enamelling
  • Rust that has eaten right through a steel bath
  • Cracks in parts of an acrylic bath we can’t get to from below

Not sure? Send photos and we’ll give you a straight answer before booking.

Materials we work on in Llanrwst

  • Whirlpool & spa baths
  • Cast iron enamel
  • Acrylic
  • Roll-top & freestanding
  • Pressed steel enamel

Signs you need bath repair in Llanrwst

Rust usually starts where water sits, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.

The things customers generally mention when they call include:

  • A hole punched through by something heavy
  • A cracked acrylic bath
  • A chip where the taps sit
  • Chips along the edge of the bath

Questions to ask before booking

  • Whether they match the colour on site
  • How to care for the finish
  • When it can be used again
  • Whether the price covers travel

Our hiring checklist

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.