Conwy · Wales
Bath chip & crack repair in Pandy Tudur, Conwy
Damaged bath in Pandy Tudur? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Rusty patches near the plughole
Questions from Pandy Tudur
How quickly can you book me in?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Is the work guaranteed?
All our work carries our one-year guarantee. We will explain what it covers when we quote.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
How long before I can use the bath?
Normally within a day, though it depends on what we have done.
Which areas do you work in?
We cover the whole UK, including Pandy Tudur and the rest of Conwy. Just include your postcode and we will confirm dates.
Will I be able to see the repair?
On a bath in good condition, a colour matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Is there any odour?
It depends on the job, but often a little. Open windows and an extractor fan help.
How we handle bath repair in Pandy Tudur
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in a single visit. We work on pressed steel enamel, cast iron enamel and whirlpool & spa baths, and common reasons people contact us are cracks in an acrylic bath and rust by the waste and overflow.
A one-year guarantee comes as standard, so you are covered after the visit.
- Location
- Pandy Tudur (LL22)
- Area hub
- Conwy
- Cover
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Prices and what affects them
Repairs from £95. We price every job individually. What matters most is:
- Any earlier repairs that need removing first
- What the surface is made of
- How hard the colour is to match
- How many areas need work
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Getting a price from pictures
Most quotes are done from pictures alone. To help us price it:
- Where you are, by postcode
- A picture taken from further back
- Details of any past repairs
- Good light, ideally daylight, without flash glare
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
How to look after the repair
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Clean with warm water and a mild detergent
- Check that an acrylic bath doesn’t move when you stand in it
- Get any new chip repaired before it rusts
- Avoid scourers, wire wool and gritty cream cleaners
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath, avoiding abrasives.
Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Take it off before we arrive.
Also near Pandy Tudur
More services for Pandy Tudur
What happens on the day
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes a few hours, depending on what we find, and we finish by cleaning up and talking you through the result.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, usually by the day after, the bath is ready to use.
Getting ready for the visit
- Make sure the area is dry
- Mention any parking restrictions or tricky access
- Tell us about any previous repairs or coatings
Getting a price
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.
Related advice
For landlords and businesses
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
What we’re called out for in Pandy Tudur
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the base flex until it cracks.
Send us a picture if you notice any of these:
- Snagging damage from a refit
- A chip where the taps sit
- A chipped rim or side
- Rusty patches near the plughole
What your quote should include
- Who turns up on the day
- Whether cleaning and preparation are in the price
- How your room will be protected
- Whether there are any call-out or travel charges
When we would advise against a repair
It helps to know what we cannot do too:
- Leaking fittings, which need a plumber
- Flexing caused by a failed cradle or loose feet
- Cracks in acrylic we cannot reach from underneath
If in doubt, send photos and we will say what we think before you book.
What we work on
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
About Pandy Tudur
Pandy Tudur is about 9 miles south of Bae Colwyn, in Conwy. From the centre of Pandy Tudur to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our technicians cover 75 places in Conwy. We work right across the region, from Pandy Tudur to Liverpool (36 miles away).
Our technicians cover all of the LL22 postcode area. Other places close to Pandy Tudur include Llangernyw (2 miles north-east), Llanddoged (3 miles west), Llanrwst (4 miles south-west), Llansannan (5 miles east) and Trefriw (5 miles west). Larger places within reach include Bae Colwyn (9 miles north), Llandudno (12 miles north-west), Old Colwyn (9 miles north), Colwyn Bay (9 miles north), Abergele (10 miles north-east) and Colwyn Bay (9 miles north).
Landmarks near Pandy Tudur
Pandy Tudur’s nearest station is Llanrwst station, about 4 miles south-west of the centre. Other landmarks nearby include Pen-y-Castell (4.3 miles west) and Sir Henry Jones Museum (2 miles north-east). Open spaces near Pandy Tudur include Moel Wenlli and Chwythlyn.
About our accreditations · Every repair comes with a one-year guarantee.
