Northumberland · England
Bath Repair for Longframlington homes
Fixed-price bath repair in Longframlington and the surrounding area, done in a single visit in most cases.
- Repairs from £95
- Cracks in an acrylic bath
- A failed DIY repair that is discoloured or lifting
Longframlington and the surrounding area
Longframlington is about 11 miles north-west of Morpeth, in Northumberland. Jobs in Longframlington are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. We work in all 189 towns and villages across Northumberland. Our nearest city page is Newcastle upon Tyne, about 23 miles away.
Jobs in NE65 are booked in the same way as anywhere else. Local streets include Cherryhope, Rimside View and Knogley Way, all of which we cover. We also cover the places around Longframlington: North End (1 mile north-east), Swarland (3 miles north-east), The Lee (3 miles south-west), Felton (3 miles east) and West Thirston (3 miles east). Further out, we also cover Ashington (13 miles south-east), Morpeth (11 miles south-east), Bedlington (14 miles south-east), Alnwick (8 miles north-east), Amble (9 miles east) and Newbiggin-by-the-Sea (14 miles south-east).
Near you in Longframlington
Typical jobs here are in homes near Granby Inn and Church of St Mary, among other places. Well-known places in the area include Rothbury Community Hospital (4.5 miles west) and Brinkburn Low Ward (1.4 miles south). Green spaces nearby include Rothbury Forest.
Bath repair at your home in Longframlington
Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. If you’re dealing with deep scratches in acrylic and holes from dropped items, we can typically put it right, on pressed steel enamel, whirlpool & spa baths and roll-top & freestanding alike.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Area
- Longframlington (NE65)
- County
- Northumberland
- Warranty
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath repair
Prices start from £95. There are no hourly rates or hidden extras. The price is based on:
- Access to the area
- Any earlier repairs that need removing first
- Doing more than one item at once
- How hard the colour is to match
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Getting a price from pictures
Two or three clear pictures are normally enough. It helps if you send:
- The postcode, so we can plan the visit
- Any details about the material
- Something in shot to show the size
- Any earlier repairs or coatings
Upload photos of the damage and a wider shot of the whole item, with your NE65 postcode, and we’ll reply with a fixed quote.
What happens on the day
You don’t need to empty the room beforehand. We bring everything we need with us, put protection down and get going once we’ve agreed what we’re doing. Most jobs take two to three hours for most chips, and you can get on with other things while we’re there.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Have a window or extractor fan available
- Keep pets and children out of the room while we work
How to get a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.
Read more
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
Why repair rather than replace?
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Our bath repair starts from £95. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
What you get with us
- One price list for the whole UK
- One visit for most repairs
- One-year guarantee on every repair
- CHAS, Constructionline and SafeContractor accredited
Take a look at our pricing and guide to resurfacing and replacement costs.
When to call us in Longframlington
Baths take more knocks than people expect: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
Most people get in touch after spotting something like this:
- Rust by the waste and overflow
- A chip where the taps sit
- A kit repair that didn’t last
- Deep scratches in acrylic
Comparing quotes
- What the guarantee covers, and for how long
- Aftercare advice
- Who will actually do the work
- How soon you can use it again
Longframlington: your questions answered
What happens next?
We come back with a fixed price. There is no obligation to book.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
How do I book?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
I’m a tenant. Can you help?
Yes. Check with your landlord; we can send the quote to them too.
Will I be able to see the repair?
On a bath in good condition, a colour-matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders in Longframlington.
For landlords and businesses
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Honest limits
Not everything can be repaired, and we would rather say so up front. Repairs won’t solve:
- Rust that has eaten right through a steel bath
- A bath worn all over, where resurfacing makes more sense
- Cracks in acrylic we cannot reach from underneath
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we repair
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
Also in Longframlington
About our accreditations · Every repair comes with a one-year guarantee.
