Lancashire · England
Bath chip & crack repair in Low Moor, Lancashire
Fixed-price bath repair in Low Moor and the surrounding area, normally in one visit.
- Repairs from £95
- A cracked acrylic bath
- Impact holes in acrylic
Bath repair in Low Moor, done in place
A damaged bath doesn’t have to mean a new bathroom. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day so the repair is hard to spot. If you are dealing with damage done while the bathroom was being fitted and chips under the taps, we can help, whatever the material.
A one-year guarantee comes as standard, so you’re not left on your own once we’ve gone.
- Area
- Low Moor (BB7)
- County
- Lancashire
- Cover
- A year, on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Keeping it looking good
After the repair has cured, a few habits help it last:
- Cover the bath during DIY or decorating
- Give the bath a quick rinse after use
- Keep metal cans and razors off the surface
- Don’t leave a fresh chip for long
A repaired bath needs no special treatment, just sensible cleaning. Skip bleach and gritty creams.
A small chip is a quick job. Left alone, they stain and can rust, so it’s worth getting them done early.
Places near Low Moor
What else we do in Low Moor
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Honest limits
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Leaking fittings, which need a plumber
- A bath that moves underfoot, until its support is fixed
- Metal that has corroded all the way through
Not sure? Send pictures and we’ll give you a straight answer before you book.
Surfaces we repair
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
What bath repair costs
Prices start from £95. We charge the same across the UK, including Low Moor. What changes the price is:
- Where the damage is and how we get to it
- The material and finish
- What kind of damage it is
- How many areas need work
A repair is priced on what needs doing, not your postcode. You’ll see the full price before you book, with nothing added on the day.
Getting a price from photos
We price nearly every job from pictures. This is what we need:
- Daylight if possible, and no flash reflection
- Something in shot to show the size
- Details of any past repairs
- Your postcode, so we can check dates
To get a price, send two or three pictures through our quote form or call us. We’ll tell you honestly whether it can be repaired.
Should you replace it?
Replacing a fitted bath normally involves a plumber, removing the old bath, making good the tiles and panel and disposing of the old one. Repairing it fixes just the damaged area in one visit. Prices start from £95. We don’t add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- Honest advice, even when it means no job
- Typically one visit, start to finish
- Accredited with CHAS, Constructionline and SafeContractor
- Colours mixed by hand to suit your surface
Take a look at our prices page and bath cost comparison.
The process
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, do the job and clear up. Allow two to three hours for most chips. Before we go, we’ll explain when it can be used and how to care for it.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Tell us if there are stairs or a lift
- Have a window or extractor fan available
Get a quote
For a price in Low Moor, pictures are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Related advice
Do you need bath repair in Low Moor?
Rust normally starts where water sits, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
Send us a picture if you notice any of these:
- Deep scratches in acrylic
- Hairline or through cracks in acrylic
- Chips along the edge of the bath
- Holes from dropped items
Before booking anyone
- Is the price fixed, and does it include VAT?
- What aftercare is recommended
- When it can be used again
- How the room is protected while they work
About Low Moor
Low Moor is about 1 mile west of Clitheroe, in Lancashire. Across the BB7 area, we come to you. Low Moor is one of 482 towns and villages in Lancashire where we work. Our nearest city page is Manchester, about 28 miles away.
Here we cover the BB7 postcode area. Jobs here include addresses on Lune Road, Croal Road and Manor Road and the roads around them. We also cover the places around Low Moor: Waddington (1 mile north), Great Mitton (2 miles south-west), Barrow (2 miles south), Nethertown (3 miles south) and Whalley (3 miles south). We also work in nearby towns such as Preston (14 miles south-west), Burnley (9 miles south-east), Bamber Bridge (14 miles south-west), Accrington (8 miles south), Fulwood (14 miles south-west) and Nelson (9 miles east).
Around Low Moor
In Low Moor, that means homes near Ribblesdale High School, Edisford Primary School and New Inn, among other places. For rail, the closest station is Clitheroe station, about 0.7 miles east. A little further out are Old Chapel Museum (2.8 miles south-west) and Clitheroe Castle (0.7 miles east). The countryside around Low Moor includes Salthill Quarry and Browsholme Tarn.
What your bath is made of matters
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
Low Moor questions
Is repairing better than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.
Can a cracked acrylic bath be fixed?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
What happens next?
We look at the photos and reply with a fixed price and some dates. If we need another angle, we will ask.
Can you repair a hole in a bath?
Generally. Photos of the hole and the underside help us check.
How do I book?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
How long does the repair take to cure?
Usually the day after. We confirm the time before we leave.
Do you repair coloured baths?
Yes. We mix the colour on the day to match, including older coloured suites.
How soon can you come?
We will give you dates with your quote. Tell us if you need it done quickly.
About our accreditations · Every repair comes with a one-year guarantee.
