Cumbria · England
Bath chip & crack repair in Lowca, Cumbria
Bath repair in Lowca without the cost of replacing. Send us photos for a fixed price, then we come to you.
- Repairs from £95
- Chips along the edge of the bath
- A failed DIY repair that’s discoloured or lifting
Bath repair at your home in Lowca
Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. If you are dealing with holes from dropped items and a chip where the taps sit, we can normally put it right.
The work is covered for a year after we finish. Just call us if there is a problem and we will sort it.
- Area
- Lowca (CA28)
- County
- Cumbria
- Warranty
- 12 months on all our work
- Price
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Keeping it looking good
How the surface is treated afterwards matters. Here’s what we suggest:
- Rinse the bath after use, especially in hard water areas
- A dripping tap stains enamel, so fix it early
- Keep abrasive pads and gritty cleaners away from the bath
- Clean with warm water and a mild detergent
Leave the repair to cure for as long as we say before running a bath. After that, gentle cleaning keeps it looking good.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Take it off before we arrive.
Other services in Lowca
FAQs for Lowca
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Is a cracked acrylic bath repairable?
Generally, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a picture.
Can I add another job to the visit?
Yes. Doing several items on one visit usually costs less than separate visits. Include photos of each item.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
Are there extra charges for Lowca?
Travel is included in the price, and we charge the same wherever you are.
Will the repair last?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
What areas do you cover?
All of Cumbria, and the rest of the UK. There’s no extra charge for travel.
Our work in Lowca
Lowca is about 3 miles north of Whitehaven, in Cumbria. Book a date that suits you, and we will give you an arrival time in advance, so you are not left waiting in all day. We cover 438 places in Cumbria, from the larger towns to small villages.
We cover every part of CA28. From Ghyll Bank, Croft Head View and Solway Road or anywhere nearby, we can come to you. Nearby, we also work in Parton (1 mile south), Low Moresby (1 mile south-east), Common End (1 mile north-east), Quality Corner (1 mile south) and Moresby Parks (2 miles south-east). We also work in nearby towns such as Workington (4 miles north), Whitehaven (3 miles south), Maryport (10 miles north), Cockermouth (10 miles north-east), Moorclose (4 miles north) and Cleator Moor (5 miles south-east).
Near you in Lowca
Typical jobs here are in homes near Church of St Bridget and Lowca Community School, among other places. Lowca’s nearest station is Parton station, roughly 0.8 miles south-west of the centre. Further afield, we also cover the area around The Rum Story (2.4 miles south) and Hayes Castle (1.1 miles north-east).
Work for landlords and builders
For anyone letting property in or around Lowca, we’ll quote for several properties at once. Send pictures for each one and we’ll price them together.
Landlords, letting agents and housing providers in Lowca use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
When to call us in Lowca
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, frequently before anyone notices. We repair snagging damage like this regularly.
Customers usually contact us about:
- A kit repair that didn’t last
- Impact holes in acrylic
- Rusty patches near the plughole
- Deep scratches in acrylic
Comparing quotes
- What the guarantee covers, and for how long
- How to look after the finish
- What happens if they find more damage
- Whether cleaning and preparation are in the price
The process
You don’t need to empty the room. Everything we use comes in the van with us, put protection down and get going once we have agreed what we are doing. It usually takes a few hours, and you can get on with other things while we’re there.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
Before we arrive
- Tell us if there are stairs or a lift
- Point us to the nearest place to park
- Move bottles, mats and clutter away from the area
How to get a price
Most customers in Lowca get their price from pictures. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Read more
How we price bath repair
Prices start from £95. There’s no charge for travel to Lowca. The price depends on:
- What the surface is made of
- How many areas need work
- Doing more than one item at once
- How hard the colour is to match
A repair is priced on what needs doing, not your postcode. The full price is agreed before booking, with no extras added later.
Quotes from your pictures
When you take your photos, these tips help us give you a firm price:
- One picture of the whole bath
- Any details about the material
- The postcode, so we can plan the visit
- Daylight if possible, and no flash reflection
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Honest limits
It helps to know what we cannot do:
- A bath that moves underfoot, until its support is fixed
- Leaking fittings, which need a plumber
- Metal that has corroded all the way through
If in doubt, send photos and we’ll say what we think.
Materials we work on in Lowca
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
Different materials, different repairs
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, in much the same way.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Should you replace it?
Swapping a damaged bath for a new one normally means a plumber, lifting out the old bath, re-tiling and a new panel and disposing of the old one. A repair deals only with the damage in one visit. Prices start from £95. What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Why book with us
- Dust sheets down, tidy finish
- We come to you, anywhere in the UK
- One visit for most repairs
- Fixed prices from your photos
See our full price list and guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
