Cumbria · England
Bath chip & crack repair in Parton, Cumbria
We travel to Parton for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Holes from dropped items
- A chip where the taps sit
Landlords, agents and businesses in Parton
Landlords, letting agents and housing providers in Parton use us as well as householders. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
How we handle bath repair in Parton
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Typical jobs include impact holes in acrylic and an old repair that has yellowed or come loose, in cast iron enamel, roll-top & freestanding and acrylic.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Where
- Parton (CA28)
- Region
- Cumbria
- Guarantee
- One year on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
How it works
We agree an arrival time beforehand, so you’re not left guessing. On site, it takes a few hours for most jobs. We leave the room clean.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Tell us about any previous repairs or coatings
- Let the surface dry out before the visit
Getting a price
Upload a picture of the damage and one of the whole item, and tell us you are in Parton, and we’ll reply with a fixed price.
Read more
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
What bath repair costs
Prices start from £95. Quotes are free and the price is fixed. What we look at:
- Access to the area
- How many items we do on one visit
- Any earlier repairs that need removing first
- How many areas need work
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Getting a price from pictures
We price nearly every job from photos. This is what we need:
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
- Something in shot to show the size
- Any details about the material
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Looking after it afterwards
Looking after the surface is easy:
- If an acrylic bath flexes, have its feet adjusted
- Do not leave a fresh chip for long
- Avoid scourers, wire wool and gritty cream cleaners
- Store metal items away from the bath
Don’t leave razors, cans or hair grips in the bath, because they can mark the enamel. And fix dripping taps promptly.
If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.
Repair or replace in Parton?
A new bath brings a chain of other jobs: tiles along the rim typically crack when it comes out, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Repairs from £95, with every job priced individually. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Why us?
- Same prices wherever you are
- Everything repaired in place
- One-year guarantee on every repair
- Work done at your home or business
See our full price list and resurfacing vs replacement cost guide.
Where we work around Parton
Parton is about 2 miles north of Whitehaven, in Cumbria. We agree a date that works for you, and you will know when to expect us, so there’s no waiting around. We work in all 438 towns and villages across Cumbria, from the larger towns to small villages.
Here we cover the CA28 postcode area. You’ll find streets such as The Square, Main Street and Firth View, all of which we cover. Close by, we cover Quality Corner (1 mile south-east), Lowca (1 mile north), Low Moresby (1 mile east), Moresby Parks (1 mile south-east) and Bransty (1 mile south). Further out, we also cover Workington (5 miles north), Maryport (10 miles north), Cockermouth (11 miles north-east), Moorclose (4 miles north), Cleator Moor (4 miles south-east) and Egremont (6 miles south).
Near you in Parton
We visit homes around Church of St Bridget, Bransty Primary School and St Benedict's Catholic High School, among other places. Parton has its own railway station: Parton station. Nearby you will also find The Rum Story (1.5 miles south) and West Cumberland Hospital (2.8 miles south).
Parton: your questions answered
Do you come to Parton?
Yes, we do. We send a technician to Parton for every job, and the price is the same as everywhere else.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Does someone need to be in?
We need someone to let us in. You do not need to watch us work.
How do I book?
Photos of the damage, a photo of the whole bath and your postcode. After that, we just agree a date.
How much does bath repair cost in Parton?
Repairs from £95. Because every job differs, we price from pictures. You’ll get a fixed figure before you book.
It’s been repaired before. Can you still fix it?
Yes, we often do. Removing the old work can add time, and that is in the quote.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Can you fix rust around the plughole?
Yes, very often. The rust is cut back to clean metal and sealed before we fill and finish it.
Do you need bath repair in Parton?
Dropped items cause the majority of chips, and building work is a common culprit. Acrylic baths crack for a different reason: the bath is not properly supported, so it flexes under weight.
The things clients usually mention when they call are:
- Damage done while the bathroom was being fitted
- Impact holes in acrylic
- Cracks in an acrylic bath
- Damage beneath the taps
What your quote should include
- A fixed quote, and whether VAT is included
- What happens if they find more damage
- The length of the guarantee and what it covers
- Whether the price covers travel
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Other services in Parton
About our accreditations · Every repair comes with a one-year guarantee.
