Oxfordshire · England
Bath Repair for Lower Arncott homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Lower Arncott and across Oxfordshire. Free, fixed quotes from your photos.
- Repairs from £95
- A chip where the taps sit
- Holes from dropped items
For landlords and businesses
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
If you manage property in Lower Arncott, we can repair and quote for several addresses together. Send photos for each one and we’ll come back with a combined price.
About our bath repair in Lower Arncott
Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. There’s no plumbing to disconnect, your tiles stay as they are, and the finish is matched to the rest of the bath. If you’re dealing with deep scratches in acrylic and rusty patches near the plughole, we can help, whatever the material.
Every job is backed for twelve months. If something goes wrong with the work, we come back.
- Area
- Lower Arncott (OX25)
- Area hub
- Oxfordshire
- Warranty
- One year on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Lower Arncott: your questions answered
Is a cracked acrylic bath repairable?
Normally, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a photo.
Can tenants book a repair?
We are happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Is a holed acrylic bath repairable?
Usually, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
How much does bath repair cost in Lower Arncott?
Repairs from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.
Can you repair a failed DIY repair?
Yes. We take out the old repair and do it properly. Mention it when you send pictures.
Do you work in Lower Arncott?
Yes. We work across the UK and travel to Lower Arncott. Send us photos for a fixed quote, or call 0345 017 0787.
When to call us in Lower Arncott
Heavy toiletries are the biggest single cause of chips, with dropped shower heads close behind. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.
If you can see any of these, send us a photo:
- Impact holes in acrylic
- A kit repair that didn’t last
- Scratches you can feel with a fingernail
- Cracks in an acrylic bath
What your quote should include
- What protection goes down before work starts
- Who will actually do the work
- What the guarantee covers, and for how long
- Is the price fixed, and does it include VAT?
Looking after it afterwards
Most damage we see is avoidable. These habits help:
- Rinse the bath after use, especially in hard water areas
- Stick to mild cleaners and a soft cloth
- Cover the bath during DIY or decorating
- A dripping tap stains enamel, so fix it early
Don’t leave razors, cans or hair grips in the bath, as they can leave rust marks. A dripping tap should be fixed early, too.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and water can get through to the floor below.
More services for Lower Arncott
Where we work around Lower Arncott
Lower Arncott is about 3 miles south-east of Bicester, in Oxfordshire. Wherever you are in the OX25 postcode area, we carry out the work at your property. We cover all 443 towns and villages across Oxfordshire, from the larger towns to small villages. Our nearest city page is London, about 50 miles away.
Our visits in OX25 are booked in the same way as anywhere else. Local streets include Ploughley Road and Willowbrook, and we cover them all. Nearby, we also work in Upper Arncott (1 mile south), Ambrosden (1 mile north), Merton (2 miles west), Murcott (2 miles south-west) and Fencott (2 miles south-west). Within a short drive, we also cover Oxford (9 miles south-west), Bicester (3 miles north-west), Abingdon-on-Thames (14 miles south-west), Thame (10 miles south-east), Kidlington (8 miles west) and Chinnor (14 miles south-east).
Landmarks near Lower Arncott
Locally, our jobs take us to homes close to Five Acres Primary School, The Plough pub and Church of St Mary the Virgin. The nearest railway station is Bicester Village station, roughly 2.8 miles north-west of the centre. Nearby you’ll also find Bicester Community Hospital (3.2 miles north-west) and Bicester Village (2.9 miles north-west). For a walk, there is Graven Hill and Woodsides Meadow.
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
How we price bath repair
Prices start from £95. We price every job individually, from your pictures. What matters most is:
- Whether old repairs or coatings need taking off
- Doing more than one item at once
- Where the damage is and how we get to it
- How many areas need work
Our prices are the same across the UK, with no extra for Lower Arncott. The job itself decides the price: how much damage, what it’s made of and how many items.
Send photos for a quote
It only takes a minute to photograph the damage. Try to send:
- Where you are, by postcode
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
- A photo taken from further back
Email us a photo of the damage and a wider shot of the entire item, and tell us you are in Lower Arncott, and we will come back with a fixed quote.
What a repair cannot fix
A few problems are outside what a surface repair can do:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A bath worn all over, where resurfacing makes more sense
- Cracks in acrylic we cannot reach from underneath
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
How the visit works
Nothing needs to be moved out of the room beforehand. We bring everything we need with us, put protection down and get going once we’ve agreed what we’re doing. It usually takes a morning or an afternoon, and you’re welcome to carry on with your day while we work.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Let us know about parking or access
- Let us know which floor the room is on
- Keep a parking space free if you can
How to get a price
For a price in Lower Arncott, the easiest route is pictures: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
