Oxfordshire · England
Bath Repair for Fencott homes
Chip and crack repairs to enamel, acrylic and cast iron baths in Fencott, carried out at your home and guaranteed for a year.
- Repairs from £95
- Deep scratches in acrylic
- Rust spots around the plughole
How to look after the repair
A little care keeps the finish looking good. We recommend:
- Get a dripping tap fixed promptly
- Have new chips seen to early
- Keep metal cans and razors off the surface
- If an acrylic bath flexes, have its feet adjusted
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine, avoiding abrasives.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
Bath repair at your home in Fencott
Chips, cracks, rust spots and small holes is repaired in place. There’s no plumbing to disconnect, the tiles aren’t touched, and the repaired area is colour-matched so it blends in. Our technicians work on roll-top & freestanding, pressed steel enamel and whirlpool & spa baths, and common reasons people get in touch are scuffs and scratches in the surface and chips along the edge of the bath.
All of our repairs are guaranteed for twelve months in Fencott and everywhere else. We return to put right any problem with the work.
- Where
- Fencott (OX5)
- County
- Oxfordshire
- Guarantee
- One year on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Fencott and nearby
Fencott is about 4 miles south of Bicester, in Oxfordshire. Our technicians come to customers in Fencott and nearby villages, so there’s no workshop to go to. Fencott is one of 443 towns and villages in Oxfordshire we cover. You can also see our page for London, about 52 miles away.
Every address in OX5 is covered. If you are just outside Fencott, we cover Murcott (1 mile south-east), Charlton-on-Otmoor (1 mile west), Merton (1 mile north), Upper Arncott (2 miles east) and Wendlebury (2 miles north-west). Larger places within reach include Oxford (7 miles south-west), Bicester (4 miles north), Abingdon-on-Thames (12 miles south-west), Witney (14 miles west), Thame (11 miles south-east) and Kidlington (5 miles west).
Landmarks near Fencott
We visit homes around The Crown pub, Charlton-on-Otmoor Church of England Primary School and Murcott Mission Room, among other places. The nearest railway station is Islip station, roughly 3.2 miles west of the centre. A little further out are Bicester Avenue (3.2 miles north) and Bicester Community Hospital (3.8 miles north). The countryside around Fencott includes Otmoor RSPB reserve and Graven Hill.
How we price bath repair
Repairs from £95. There are no hourly rates or hidden extras. The price depends on:
- How easy the damage is to reach
- What kind of damage it is
- Whether old repairs or coatings need taking off
- How many areas need work
Set against the cost of replacement, repairing usually costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
How to get a fixed quote
Almost every job we do is priced from pictures. This is what to send:
- Your postcode, so we can check dates
- A close-up of the damage, in focus
- A wider photo showing the whole bath
- Any details about the material
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Do you need bath repair in Fencott?
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: the bath isn’t properly supported, so it flexes under weight.
People typically call us after spotting one of these:
- Rust by the waste and overflow
- Hairline or through cracks in acrylic
- Impact holes in acrylic
- Snagging damage from a refit
What your quote should include
- Whether they match the colour on site
- Who turns up on the day
- Whether the price covers travel
- How your room will be protected
Places near Fencott
Also in Fencott
Common questions in Fencott
Can you redo someone else’s repair?
Yes, we frequently do. Removing the old work can add time, and that is in the quote.
How do I book?
Send photos through the quote form or call 0345 017 0787, and we’ll do the rest.
Is there any odour?
It depends on the job, but frequently a little. Open windows and an extractor fan help, and it soon fades.
How invisible is a bath repair?
We aim for a repair you can’t easily find. The rest of the bath’s condition makes a difference, and we’ll tell you what to expect.
What happens next?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
What about rust by the waste?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What happens on the day
Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the work takes a morning or an afternoon, and we finish by cleaning up and talking you through the result.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, generally by the following day, the bath is ready to use.
How to prepare
- Tell us if there are stairs or a lift
- Keep pets and children out of the room while we work
- Make sure the room can be ventilated
Ask for a price
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and we will reply with a fixed price. Quotes are free and you are under no obligation.
Related advice
Landlords, agents and businesses in Fencott
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
Repairs by material
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so repair chips early.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Repair or replace: which is better?
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and the bathroom stays exactly as it is. Our bath repair starts from £95. Our prices are the same across the UK, with no extra for Fencott. The job itself decides the price: the material, the amount of damage and how many items.
Why book with us
- Work done at your home or business
- Colours mixed by hand to suit your surface
- We’ll tell you if it’s not worth repairing
- Rooms protected and left tidy
Read our prices page or resurfacing vs replacement cost guide.
When we’d advise against a repair
We will always be straight with you, so here’s what a repair cannot fix:
- Leaks from the waste or overflow fittings (a plumber’s job)
- A steel bath rusted through
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
Not sure? Send photos and we will give you a straight answer.
Materials we work on in Fencott
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
About our accreditations · Every repair comes with a one-year guarantee.
