Oxfordshire · England
Bath chip & crack repair in Merton, Oxfordshire
Bath repair in and around Merton: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Repairs from £95
- A cracked acrylic bath
- Scuffs and scratches in the surface
Covering Merton
Merton is about 3 miles south of Bicester, in Oxfordshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Merton is one of 443 towns and villages in Oxfordshire where we work. Our jobs stretch from Merton to London (about 52 miles away).
We cover every part of the OX25 postcode area and the streets around it. Close by, we cover Fencott (1 mile south), Murcott (1 mile south-east), Charlton-on-Otmoor (1 mile south-west), Wendlebury (2 miles north-west) and Lower Arncott (2 miles east). We also work in nearby towns such as Oxford (8 miles south), Bicester (3 miles north), Abingdon-on-Thames (13 miles south), Witney (15 miles west), Thame (11 miles south-east) and Kidlington (6 miles south-west).
Near you in Merton
Typical jobs here are in homes near Church of St Swithin and The Old Plough pub. For rail, the closest station is Bicester Village station, roughly 2.7 miles north. Other landmarks nearby include Bicester Community Hospital (2.9 miles north) and Bicester Avenue (2.3 miles north). The countryside around Merton includes Graven Hill and Woodsides Meadow.
Bath repair in Merton without replacing anything
Chips, cracks, rust spots and small holes is repaired in place. Nothing is unplumbed, your tiles stay as they are, and the repaired area is colour-matched so it blends in. Common call-outs are for a chipped rim or side and an old repair that has yellowed or come loose, in cast iron enamel, pressed steel enamel and roll-top & freestanding.
Big or small, it’s backed by a one-year guarantee.
- Area
- Merton (OX25)
- Region
- Oxfordshire
- Warranty
- 12 months on all our work
- Price
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Merton
What else we do in Merton
DIY kit or professional repair?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
Should you replace it?
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Prices start from £95. We do not add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why choose Surface Doctor in Merton
- No need to remove anything
- Straight answers about what a repair can do
- Usually one visit, start to finish
- Dust sheets down, tidy finish
Read our prices page and guide to resurfacing and replacement costs.
Work for landlords and builders
Landlords, letting agents and housing providers in Merton use us as well as householders. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
What we cannot put right
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Water coming from the waste or taps rather than the bath
- Acrylic cracks with no access behind them
- A whole bath that is dull or worn, where a full re-enamel is the better fix
Send us photos and we will tell you honestly.
Materials we work on in Merton
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
What happens on the day
We begin by going over the job with you. Then the area is sheeted and masked and the work begins. You can expect it to take a morning or an afternoon, and we will keep you posted as we go.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can normally use the bath the next day.
Preparing for the visit
- Ensure the area is dry
- Clear toiletries, mats and anything else from around the area
- Open a window if you can
Getting a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote.
Read more
Signs you need bath repair in Merton
Heavy toiletries are the biggest single cause of chips, with dropped shower heads close behind. Fittings cause damage too: water sits around them, and any chip there soon rusts.
The most common problems we are called about are:
- Chips under the taps
- Impact holes in acrylic
- A kit repair that didn’t last
- Cracks in an acrylic bath
Before you book anyone
- Is the price fixed, and does it include VAT?
- How to look after the finish
- How long the guarantee is and what it covers
- Whether a trained technician does the job
FAQs for Merton
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
How much does bath repair cost in Merton?
Repairs from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
How long before I can use the bath?
Generally the next day. We will tell you the exact curing time when we finish.
How soon can you come?
That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.
Can you fix rust around the plughole?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Do the materials smell?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.
Which areas do you work in?
Across the UK, so Merton is covered. Prices don’t change with location.
Something went through my bath. Can it be fixed?
Generally, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Protect the bath with a towel when doing jobs nearby
- Don’t leave a fresh chip for long
- Avoid scourers, wire wool and gritty cream cleaners
- Rinse the bath after use, especially in hard water areas
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath without abrasive products.
If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.
About our accreditations · Every repair comes with a one-year guarantee.
