Wiltshire · England
Bath Repair for Lower Wraxall homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Lower Wraxall and across Wiltshire. Free, fixed quotes from your photos.
- Repairs from £95
- Holes from dropped items
- Scuffs and scratches in the surface
Landlord and trade work in Lower Wraxall
Housing associations and facilities teams use us for planned and reactive repairs in Wiltshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Bath repair in Lower Wraxall, done in place
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, generally in a single visit. We’re frequently asked to fix holes from dropped items and a chip where the taps sit, on cast iron enamel, acrylic and whirlpool & spa baths.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we will come back.
- Area
- Lower Wraxall (BA15)
- Area hub
- Wiltshire
- Cover
- One year on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Towns and villages near Lower Wraxall
Other services in Lower Wraxall
How we price bath repair
Prices start from £95. There’s no charge for travel to Lower Wraxall. The price comes down to:
- The material and finish
- The size and number of damaged areas
- Access to the area
- Doing more than one item at once
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Getting a price from photos
We price nearly every job from pictures. This is what to send:
- Details of any past repairs
- A wider photo showing the whole bath
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.
Covering Lower Wraxall
Lower Wraxall is about 4 miles north of Trowbridge, in Wiltshire. Clients in Lower Wraxall get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. We work in all 425 towns and villages in Wiltshire, from the larger towns to small villages. You can also see our page for Birmingham, about 77 miles away.
All of BA15 is covered, from the main roads to the quietest streets. Neighbouring places we cover include South Wraxall (1 mile north), Bradford Leigh (1 mile south), Little Ashley (2 miles south-west), Monkton Farleigh (2 miles north-west) and Pinckney Green (2 miles west). We also work in nearby towns such as Trowbridge (4 miles south), Chippenham (7 miles north-east), Calne (11 miles north-east), Devizes (11 miles east), Westbury (8 miles south) and Melksham (5 miles east).
Around Lower Wraxall
Locally, our jobs take us to homes close to Stonar School, Church of St James and St Laurence School and the streets around them. For rail, the closest station is Bradford-On-Avon station, about 2.3 miles south. Nearby you will also find Trowbridge Community Hospital (3.8 miles south) and Bradford On Avon Museum (2.2 miles south).
- Parks and local facilities nearby include Bradford Without (2.2 miles south-east)
Repair or replace: which is better?
A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and the bathroom stays exactly as it is. Prices start from £95. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why choose Surface Doctor in Lower Wraxall
- Same prices wherever you are
- We will tell you if it’s not worth repairing
- Technicians who travel to you, UK-wide
- Colours mixed by hand to suit your surface
Read our prices page or guide to resurfacing and replacement costs.
What we can’t put right
A few problems are outside what a surface repair can do:
- Acrylic cracks with no access behind them
- A bath worn all over, where resurfacing makes more sense
- Flexing caused by a failed cradle or loose feet
Not sure? Send photos and we’ll give you a straight answer before booking.
What we work on
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
DIY repairs versus a professional job
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Avoid scourers, wire wool and gritty cream cleaners
- Use a soft cloth and washing-up liquid for everyday cleaning
- Give the bath a quick rinse after use
- Get any new chip repaired before it rusts
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
Different materials, different repairs
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.
Lower Wraxall questions
I tried a repair kit. Can you fix it?
Yes. We take out the old repair and do it properly. Tell us about it when you send pictures.
Can I add another job to the visit?
Yes, and it’s often cheaper. Send pictures of everything together and you’ll get one combined price.
Can you quote from photos?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Do you cover the whole of Wiltshire?
The whole UK, including all of Wiltshire. Send your postcode with your pictures and we’ll confirm dates.
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Lower Wraxall.
What happens on the day
Your technician turns up at the time we agreed with you, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before any work starts. The work itself takes a morning or an afternoon, and the room is left clean and tidy.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Tell us if there are stairs or a lift
- Make sure the area is dry
- Have somewhere for us to park nearby if possible
Get a quote
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and you are under no obligation.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
