Wiltshire · England
Bath Repair in Pinckney Green
Local bath repair for Pinckney Green: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Rust spots around the plughole
- Chips under the taps
Bath repair at your home in Pinckney Green
We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath and the tiles around it. You can typically use the bath the following day. We’re often asked to fix damage beneath the taps and hairline or through cracks in acrylic, on pressed steel enamel, roll-top & freestanding and cast iron enamel.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Pinckney Green (BA15)
- Area hub
- Wiltshire
- Cover
- One year on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace in Pinckney Green?
Many people think a damaged bath means a new one. In most cases it does not: a repair keeps the bath in service for years, without the cost and upheaval of replacing it. Prices start from £95. We do not add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why Pinckney Green customers choose us
- Most jobs done in one visit
- One-year guarantee on every repair
- No need to remove anything
- We leave the room as we found it
Take a look at our full price list or bath cost comparison.
How it works
We work cleanly and quietly, so you can carry on at home. We protect the area first, then the job itself takes a morning or an afternoon. Before we leave, we explain how soon it can be used and how to look after it.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can usually use the bath the next day.
Preparing for the visit
- Keep a parking space free if you can
- Avoid using the area for a few hours before we arrive
- Tell us if there are stairs or a lift
Ask for a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
Advice
Repairs by material
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
What bath repair costs
Prices start from £95. There’s no area surcharge for Pinckney Green. What changes the price is:
- Whether it’s a chip, crack, burn or wear
- How many areas need work
- Any earlier repairs that need removing first
- How easy the damage is to reach
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Send photos for a quote
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- A picture taken from further back
- Where you are, by postcode
- Good light, ideally daylight, without flash glare
- A clear, close picture of the problem area
Send us a picture of the damage and a wider shot of the whole item, with your BA15 postcode, and we’ll come back with a fixed quote.
Pinckney Green questions
I tried a repair kit. Can you fix it?
Yes, we do this often. We strip it out, deal with any rust and repair it again.
What if the damage is worse than the photos show?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Do you work for landlords and businesses?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Will I be able to see the repair?
On a glossy bath, you’ll struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
What about rust by the waste?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Can I get a quote without a visit?
Generally, yes. Clear pictures let us give you a fixed quote without visiting.
Can I fix it myself?
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
Do you need bath repair in Pinckney Green?
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
Common reasons people in Pinckney Green contact us are:
- An old repair that has yellowed or come loose
- Rust spots around the plughole
- Chips along the edge of the bath
- Deep scratches in acrylic
What your quote should include
- What preparation is included
- Whether they match the colour on site
- What happens if the damage is worse than the photos show
- How long the guarantee is and what it covers
When a repair isn’t the answer
Some jobs aren’t right for a repair, including:
- A bath worn all over, where resurfacing makes more sense
- Rust that has eaten right through a steel bath
- Leaking fittings, which need a plumber
If in doubt, send pictures and we’ll say what we think before booking.
Materials we repair
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
How to care for the repair
Simple care helps the repair last. Our advice:
- Rinse the bath after use, especially in hard water areas
- Do not leave a fresh chip for long
- Clean with warm water and a mild detergent
- Don’t scrub with anything abrasive
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust can start.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
About Pinckney Green
Pinckney Green is about 3 miles east of Bath, in Wiltshire. Jobs in Pinckney Green are booked in like any other job: a fixed price from your pictures, and a technician at your door on the day. Pinckney Green is one of 425 towns and villages in Wiltshire where we work. We work right across the region, from Pinckney Green to Birmingham (about 77 miles away).
Every address in BA15 is covered. If you’re just outside Pinckney Green, we cover Warleigh (1 mile north-west), Monkton Farleigh (1 mile north), Little Ashley (1 mile south-east), Bathford (2 miles north) and Winsley (2 miles south). We also work in nearby towns such as Trowbridge (5 miles south-east), Chippenham (9 miles north-east), Calne (13 miles east), Devizes (13 miles east), Westbury (9 miles south-east) and Melksham (7 miles east).
What’s near Pinckney Green
In Pinckney Green, that means homes near Ralph Allen School and Church of St Mary. Pinckney Green’s nearest station is Freshford station, about 2.4 miles south. Well-known places in the area include Royal National Hospital for Rheumatic Diseases (4.5 miles west) and SouthGate (3 miles west).
Nearby places to Pinckney Green
More services for Pinckney Green
About our accreditations · Every repair comes with a one-year guarantee.
