Leicestershire · England
Bath Repair in Lowesby
We travel to Lowesby for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- A hole punched through by something heavy
- A chipped rim or side
About our bath repair in Lowesby
A damaged bath doesn’t have to mean a new bathroom. We fill the damage, shape it to the curve of the bath and refinish it, with the colour mixed on site so the repair is hard to spot. We’re often asked to fix chips under the taps and a failed DIY repair that’s discoloured or lifting, on acrylic, cast iron enamel and pressed steel enamel.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll sort it.
- Location
- Lowesby (LE7)
- Area hub
- Leicestershire
- Cover
- One year on every repair
- Price
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What bath repair costs
Prices start from £95. You won’t pay by the hour. The price is based on:
- Whether we combine several jobs
- How easy the damage is to reach
- How hard the colour is to match
- Any earlier repairs that need removing first
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Send pictures for a quote
Phone pictures are fine, there is no need for anything special. Just ensure we can see:
- A wider photo showing the whole bath
- Any details about the material
- Good light, ideally daylight, without flash glare
- Details of any past repairs
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
Covering Lowesby
Lowesby is about 7 miles east of Syston, in Leicestershire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Our technicians cover all 287 towns and villages in Leicestershire. Our jobs stretch from Lowesby to Birmingham (about 43 miles away).
Our repair technicians cover all of the LE7 postcode area and the streets around it. Nearby, we also work in Cold Newton (1 mile south-west), Twyford (2 miles north), Tilton on the Hill (2 miles south-east), Hungarton (2 miles west) and Thorpe Satchville (3 miles north). Within a short drive, we also cover Loughborough (14 miles north-west), Wigston (9 miles south-west), Melton Mowbray (7 miles north), Syston (7 miles west), Shelthorpe (14 miles north-west) and Blaby (12 miles south-west).
What’s near Lowesby
Our clients here include homes close to Church of All Saints and the streets around them. Nearby you’ll also find Billesdon Rural District (3 miles south) and Sauvey Castle (4.1 miles east).
When a repair isn’t the answer
Before you book, it’s worth knowing the limits too:
- A bath that moves underfoot, until its support is fixed
- Water coming from the waste or taps rather than the bath
- Metal that has corroded all the way through
If in doubt, send photos and we’ll say what we think before booking.
Surfaces we repair
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
Different materials, different repairs
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
Signs you need bath repair in Lowesby
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Acrylic baths crack for a different reason: the bath isn’t properly supported, so it flexes under weight.
Customers typically contact us about:
- Cracks in an acrylic bath
- Chips under the taps
- A hole punched through by something heavy
- Chips caused by builders
Questions to ask before you book
- What happens if the damage is worse than the pictures show
- Whether the price is fixed and includes VAT
- How the room is protected while they work
- Whether they match the colour on site
Keeping it looking good
Much of the damage we repair could have been avoided. A few tips:
- Protect the bath with a towel when doing jobs nearby
- Get any new chip repaired before it rusts
- Use a soft cloth and washing-up liquid for everyday cleaning
- Fix dripping taps early to stop staining and limescale
A repaired bath needs no special treatment, just sensible cleaning. Skip bleach and gritty creams and rinse after use.
Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and it can start to leak underneath.
DIY repairs versus a professional job
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Nearby places to Lowesby
Also in Lowesby
FAQs for Lowesby
Can you fix rust around the plughole?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
How quickly can you book me in?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
Will the price change on the day?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Do you cover the whole of Leicestershire?
We cover the whole UK, including Lowesby and the rest of Leicestershire. Send your postcode with your pictures and we will confirm dates.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Can you redo someone else’s repair?
Generally, yes. We remove the old repair before doing a new one.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children.
Can you repair a crack in an acrylic bath?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
How it works
Nothing needs to be moved out of the room. We bring everything we need with us, put protection down and start once you’re happy with the plan. Most jobs take a morning or an afternoon, and you are welcome to carry on with your day while we work.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the next day.
How to prepare
- Have a window or extractor fan available
- Mention any earlier repairs or resurfacing
- Clear the area around the damage
Get a quote
Most customers in Lowesby get their price from photos. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Advice
Landlords, agents and businesses in Lowesby
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
About our accreditations · Every repair comes with a one-year guarantee.
