Wakefield · England
Bath Repair for Lupset homes
Local bath repair for Lupset: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- A cracked acrylic bath
- Chips on the rim or sides
Bath repair at your home in Lupset
Most of our bath repairs take a few hours, and you can normally bathe again the following day. You won’t need a plumber or tiler, because nothing is disconnected. Typical jobs include chips caused by builders and chips under the taps, in whirlpool & spa baths, acrylic and pressed steel enamel.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Lupset (WF2, WF4)
- Region
- Wakefield
- Cover
- One year on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Repair or replace in Lupset?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. If the entire surface is worn, re-enamelling may make more sense, and we will tell you. Repairs from £95, with every job priced individually. The price reflects the work involved, not where you live. The full price is agreed before you book.
Why us?
- We leave the room as we found it
- Work done at your home or business
- CHAS and Constructionline accredited
- Colours mixed by hand to suit your surface
Take a look at our prices page or bath cost comparison.
What affects the price in Lupset
Prices start from £95. A fixed quote means you know the cost before booking. We look at:
- How much damage there is
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
- The material
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
How to get a fixed quote
You can generally get a fixed price without us visiting. To make it quick:
- Daylight if possible, and no flash reflection
- One sharp close-up of the damage
- Something in shot to show the size
- Any earlier repairs or coatings
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Towns and villages near Lupset
More services for Lupset
When a repair is not the answer
We’d rather lose a job than do one that won’t last, so here’s what a repair cannot put right:
- Wear across the whole surface, which needs re-enamelling
- Rust that has eaten right through a steel bath
- Cracks in parts of an acrylic bath we cannot get to from below
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
Your questions about bath repair in Lupset
Is there any odour?
Expect a mild smell while we’re working, which fades afterwards.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
What information do you need?
Use the quote form or ring 0345 017 0787, and we’ll do the rest.
Can you repair a hole in a bath?
In most cases. Send us a photo of the hole and one from under the bath if you can.
What happens if you find more damage?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Do you cover the whole of Wakefield?
We cover the entire UK, including Lupset and the rest of Wakefield. Send your postcode with your photos and we’ll confirm dates.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.
Can a cracked acrylic bath be fixed?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
Our work in Lupset
Lupset is about 2 miles south-west of Wakefield, in Wakefield. Book a date that suits you, and we will give you an arrival time in advance, so you’re not left waiting in all day. Lupset is one of 101 towns and villages in Wakefield we cover. We work right across the region, from Lupset to Leeds (10 miles away).
Here we cover the WF2 and WF4 postcode area. Local streets include Hall Road, Milton Road and School Road, all of which we cover. Close by, we cover Thornes (1 mile east), Flanshaw (1 mile north), Horbury (1 mile south-west), Alverthorpe (1 mile north) and Durkar (1 mile south). Within a short drive, we also cover Castleford (8 miles north-east), Pontefract (9 miles east), Normanton (5 miles north-east), South Kirkby and Moorthorpe (11 miles south-east), South Elmsall (11 miles south-east) and Knottingley (12 miles east).
Near you in Lupset
Our customers here include homes close to Thornes Park, The Lupset pub and St George's Church and the streets around them. Other local landmarks include Cathedral Academy (0.6 miles east) and Wakefield Snapethorpe Primary School (within half a mile west). Lupset’s nearest station is Wakefield Westgate station, roughly 1.3 miles north-east of the centre. Further afield, we also cover the area around Clayton Hospital (1.7 miles north-east) and Sandal Castle (1.8 miles south-east). For a walk, there’s Jaw Hill and Calder Park Wetlands Nature Reserve.
Landlords, agents and businesses in Lupset
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
For anyone letting property in or around Lupset, we will quote for several properties at once. Just send pictures for each address and we’ll price them together.
Repairs by material
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
How to care for the repair
After the repair has cured, a few habits help it last:
- Cover the bath during DIY or decorating
- Get any new chip repaired before it rusts
- Avoid scourers, wire wool and gritty cream cleaners
- Rinse the bath after use, especially in hard water areas
Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
What we do, step by step
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes a few hours, depending on the damage, and we finish by cleaning up and talking you through the result.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Let the surface dry out before the visit
- Have a window or extractor fan available
Ask for a price
For a price in Lupset, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
