Wakefield · England
Bath chip & crack repair in Thornes, Wakefield
Bath repair in Thornes without the cost of replacing. Get a fixed price from your pictures, then we come to you.
- Repairs from £95
- A cracked acrylic bath
- A kit repair that didn’t last
About our bath repair in Thornes
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in one visit. We’re often asked to fix an old repair that has yellowed or come loose and chips on the rim or sides, on cast iron enamel, acrylic and roll-top & freestanding.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Where
- Thornes (WF2, WF1)
- County
- Wakefield
- Warranty
- A year, on every repair
- Price
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Places near Thornes
More services for Thornes
Common questions in Thornes
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What do you need from me?
Photos of the damage, a photo of the whole bath and your postcode. Then we will agree a date.
Can you repair a crack in an acrylic bath?
Normally, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a photo.
Is a holed acrylic bath repairable?
Typically, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Do you come to Thornes?
Yes. We work across the UK and travel to Thornes and the rest of Wakefield. Send us pictures for a fixed quote, or call 0345 017 0787.
Can rust on a bath be repaired?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
When can I have a bath again?
Usually within a day, depending on the repair.
Should I try a DIY kit first?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
What we’re called out for in Thornes
Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, a chip that reaches the metal will start to rust.
People typically call us after spotting something like this:
- Holes from dropped items
- Deep scratches in acrylic
- Chips on the rim or sides
- A kit repair that didn’t last
What your quote should include
- How the colour is matched
- Who will actually do the work
- How soon you can use it again
- What prep work is covered
What bath repair costs
Repairs from £95. We charge the same across the UK, including Thornes. What changes the price is:
- The size and number of damaged areas
- Whether it’s a chip, crack, burn or wear
- Whether we combine several jobs
- Access to the area
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Getting a price from photos
Phone photos are fine, there is no need for anything special. Make sure they show:
- Whether it’s been repaired or coated before
- A photo taken from further back
- Your postcode, so we can check dates
- A coin or ruler next to the damage for scale
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
What we do, step by step
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take two to three hours for most chips. We tidy up before we leave and tell you when it’s ready to use.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, generally the day after.
How to prepare
- Let us know which floor the room is on
- Move bottles, mats and clutter away from the area
- Open a window if you can
Get a quote
The quickest way to a price is to send two or three pictures using our quote form or ring us. We’ll say straight away whether it can be repaired.
Read more
Honest limits
A repair isn’t always the answer, and we’ll tell you before we start. Repairs will not solve:
- Wear across the entire surface, which needs re-enamelling
- Leaking fittings, which need a plumber
- Cracks in parts of an acrylic bath we cannot get to from below
Not sure? Send photos and we will give you a straight answer before booking.
What we work on
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
How to look after the repair
Nothing complicated is needed, just a few sensible habits:
- Don’t scrub with anything abrasive
- Get any new chip repaired before it rusts
- Rinse the bath after use, especially in hard water areas
- Clean with warm water and a mild detergent
Look after the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Take it off before we arrive.
Thornes and the surrounding area
Thornes is about 1 mile south-west of Wakefield, in Wakefield. Whether you are in the middle of Thornes or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Thornes is one of 101 places in Wakefield where we work. We work right across the region, from Thornes to Leeds (10 miles away).
Here we cover the WF2 and WF1 postcode area. From Field Lane, Cobb Avenue and Thornes Road or anywhere nearby, a technician can come to you. You’ll find Thornes on the A636, which makes it straightforward to reach. Other places close to Thornes include Lupset (1 mile west), Flanshaw (1 mile north-west), Durkar (1 mile south), Alverthorpe (2 miles north-west) and Kettlethorpe (2 miles south). We also work in nearby towns such as Castleford (7 miles north-east), Pontefract (8 miles east), Ossett (3 miles west), Normanton (4 miles north-east), South Kirkby and Moorthorpe (10 miles south-east) and South Elmsall (10 miles south-east).
Landmarks near Thornes
Our clients here include homes close to Church of St James, Thornes Park and Cathedral Academy, among other places. Other local landmarks include The Whinney Moor pub (0.6 miles north-west) and The Mount Junior Infant & Nursery School (less than half a mile west). The nearest railway station is Wakefield Westgate station, roughly 0.9 miles north. A little further out are Wakefield Museum And Art Gallery (1.3 miles north) and Albion Mills Retail Park (0.8 miles north). Green spaces nearby include Calder Park Wetlands Nature Reserve and Jaw Hill.
About our accreditations · Every repair comes with a one-year guarantee.
