Lancashire · England
Bath Repair in Lupton
Problem with your bath in Lupton? We repair it in place, match it on site and guarantee the work for a year.
- Repairs from £95
- Chips caused by builders
- A kit repair that didn’t last
When we would advise against a repair
A repair isn’t right for every job, including:
- Acrylic cracks with no access behind them
- Leaks from the waste or overflow fittings (a plumber’s job)
- Rust that has eaten right through a steel bath
Not sure? Send photos and we will give you a straight answer before booking.
Materials we repair
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
Bath repair in Lupton without replacing anything
Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. Our technicians work on cast iron enamel, whirlpool & spa baths and pressed steel enamel, and the jobs we see most are chips along the edge of the bath and a kit repair that didn’t last.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Area
- Lupton (LA6)
- Region
- Lancashire
- Guarantee
- One year on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Common problems we fix in Lupton
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal lets water in, and rust follows.
The most common problems we’re called about are:
- Snagging damage from a refit
- Chips under the taps
- Cracks in an acrylic bath
- A failed DIY repair that is discoloured or lifting
Before booking anyone
- When it can be used again
- Whether a trained technician does the job
- Aftercare advice
- How long the guarantee is and what it covers
Nearby places to Lupton
More services for Lupton
Repairing versus replacing in Lupton
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. A repair keeps it in place. Prices start from £95. The price reflects the work involved, not your postcode. The full price is agreed before you book.
What you get with us
- CHAS and Constructionline accredited
- Colour-matched on site
- One visit for most repairs
- No extra charge for your area
Take a look at our prices page or bath cost comparison.
What we do, step by step
We work cleanly and quietly. We protect the area first, then the job itself takes a few hours, depending on the damage. Before we leave, we explain the curing time and the aftercare.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can normally use the bath the day after.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Ensure the area is dry
- Tell us about any previous repairs or coatings
Getting a price
Send us a picture of the damage and a wider shot of the whole item, with your LA6 postcode, and we will reply with a fixed price.
Related advice
What affects the price in Lupton
Repairs from £95. You’ll know the full cost before booking. We look at:
- Doing more than one item at once
- How many areas need work
- Where the damage is and how we get to it
- What the surface is made of
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Send pictures for a quote
Most quotes are done from pictures alone. To make it quick:
- A coin or ruler next to the damage for scale
- A clear, close picture of the problem area
- Whether it’s been repaired or coated before
- One picture of the entire bath
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Your questions about bath repair in Lupton
Which areas do you work in?
Across the UK, so Lupton is covered. Our prices are the same everywhere.
Can you repair a chip on a coloured bath?
Yes. The colour is mixed on site to suit your bath, including pastel and older colours.
Something went through my bath. Can it be fixed?
Normally, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
Can I add another job to the visit?
Of course, and it typically saves money. Just add the extra items to your photos and we’ll quote them together.
When can you do it?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
What happens next?
You get a fixed quote and available dates. If anything’s unclear, we will ask for another photo.
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
How to care for the repair
Simple care helps the repair last. We recommend:
- Store metal items away from the bath
- Rinse the bath after use, especially in hard water areas
- A dripping tap stains enamel, so fix it early
- Keep abrasive pads and gritty cleaners away from the bath
Give the repair the full curing time we recommend before using the bath. After that, gentle cleaning keeps it looking good.
Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Lupton and the surrounding area
Lupton is about 8 miles south of Kendal, in Lancashire. We travel to homes and businesses in Lupton and the surrounding area, so there is no workshop to go to. Lupton is one of 482 places in Lancashire where we work. Our jobs stretch from Lupton to Leeds (about 54 miles away).
We work across LA6. We also travel to Newbiggin (1 mile south-west), Millness (2 miles north-west), Holme (2 miles south-west), Crooklands (2 miles north-west) and Clawthorpe (3 miles south-west). Larger places within reach include Lancaster (13 miles south-west), Morecambe (13 miles south-west), Heysham (15 miles south-west), Westfield War Memorial Village (13 miles south-west), Sandylands (14 miles south-west) and Carnforth (7 miles south-west).
Local landmarks in Lupton
Typical jobs here are in homes near All Saints Church. Not far away are Terrybank Tarn and Clawthorpe Fell.
About our accreditations · Every repair comes with a one-year guarantee.
