North Somerset · England

Bath chip & crack repair in Lympsham, North Somerset

Fixed-price bath repair in Lympsham and the surrounding area, normally in one visit.

  • Repairs from £95
  • Scratches you can feel with a fingernail
  • Impact holes in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Lympsham

How we price bath repair

Repairs from £95. We charge the same across the UK, including Lympsham. What changes the price is:

  • The type of damage
  • Where the damage is and how we get to it
  • What the surface is made of
  • Whether old repairs or coatings need taking off

No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.

How to get a fixed quote

Almost every job we do is priced from pictures. This is what we need:

  • Any earlier repairs or coatings
  • The material, if you know it
  • The postcode, so we can plan the visit
  • Daylight if possible, and no flash reflection

No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.

Bath repair at your home in Lympsham

We’ve repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. All of it is repaired where the bath stands with a one-year guarantee. We work on cast iron enamel, roll-top & freestanding and whirlpool & spa baths, and common reasons people get in touch are impact holes in acrylic and rusty patches near the plughole.

We stand behind the work with a one-year guarantee.

Area
Lympsham (BS24)
Region
North Somerset
Warranty
One year on every repair
Quote
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Broken acrylic bath corner, rebuilt and refinished (before and after)

Common questions in Lympsham

Is it worth repairing rather than replacing?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.

Can you redo an old repair?

Yes. We take out the old repair and do it properly. Tell us about it when you send photos.

How long does the repair take to cure?

Usually the following day. We confirm the time before we leave.

I’m a tenant. Can you help?

Of course. Check with your landlord; we can send the quote to them too.

Will the repair last?

It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.

Can you repair several things at once?

Yes, and it’s frequently cheaper. Send pictures of everything together and we’ll quote them together.

How do I get a price for bath repair in Lympsham?

Prices start from £95. Every job gets a fixed quote based on photos of the damage. Send a close-up and a photo of the whole item with your BS24 postcode.

Can you price it without visiting?

In nearly every case. If pictures do not show enough, we will ask for another angle.

Should you replace it?

When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. If the whole surface is worn, re-enamelling may make more sense, and we will tell you. Prices start from £95. We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Why choose Surface Doctor in Lympsham

  • Free fixed quotes from pictures
  • One-year guarantee on every repair
  • We’ll tell you if it’s not worth repairing
  • Colour mixed on the day to match

Read our full price list and guide to resurfacing and replacement costs.

Common problems we fix in Lympsham

Baths take more knocks than people expect: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.

If you can see any of these, send us a picture:

  • A chipped rim or side
  • An old repair that has yellowed or come loose
  • Scratches you can feel with a fingernail
  • Rusty patches near the plughole

Comparing quotes

  • What the guarantee covers, and for how long
  • What prep work is covered
  • How the room is protected while they work
  • Who will actually do the work

How to compare quotes

DIY repairs versus a professional job

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

Landlords, agents and businesses in Lympsham

We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll handle the rest.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

Where we work around Lympsham

Lympsham is about 4 miles north-east of Burnham-on-Sea, in North Somerset. We visit customers in Lympsham and the surrounding area, so you don’t need to take anything anywhere. We cover all 86 towns and villages in North Somerset.

Jobs in BS24 work the same way as everywhere else we cover. Whether you live on Church Road, Lympsham Road and The Worthings or anywhere nearby, a technician can come to you. If you are just outside Lympsham, we cover Eastertown (1 mile east), Batch (1 mile north-west), Edingworth (1 mile south-east), East Brent (2 miles south) and Brent Knoll (2 miles south). We also work in nearby towns such as Weston-super-Mare (5 miles north), Clevedon (11 miles north), Nailsea (13 miles north-east), Milton (5 miles north), Yatton (9 miles north-east) and Worle (5 miles north).

Local landmarks in Lympsham

Locally, our jobs take us to homes close to Church of St Christopher, The Hobbs Boat pub and Lympsham First School and the streets around them. The closest station to Lympsham is Weston-Super-Mare station, roughly 4.2 miles north. Further afield, we also cover the area around Weston General Hospital (2.7 miles north) and Yielding Tree Railway Museum (2.2 miles north). For a walk, there’s Wavering Down.

Map of Lympsham © OpenStreetMap contributors

How to look after the repair

Simple care helps the repair last. Our advice:

  • Do not leave razors or cans standing in the bath
  • Put a towel in the bath if you are working above it
  • Clean with warm water and a mild detergent
  • Keep abrasive pads and gritty cleaners away from the bath

Don’t leave razors, cans or hair grips in the bath, because they can mark the enamel. And fix dripping taps promptly.

Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.

How the visit works

A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Plan for a morning or an afternoon from start to finish. Before we go, we’ll explain how long to leave it and how to look after it.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. Filler goes in and is sanded flush once it has set.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the day after.

Preparing for the visit

  • Keep a parking space free if you can
  • Avoid using the area for a few hours before we arrive
  • Plan for the room to be out of bounds to pets and children

How to get a price

Send us a picture of the damage and a wider shot of the whole item, and tell us you are in Lympsham, and we’ll come back with a fixed quote.

Get a free quote

Advice

What a repair can’t fix

To be straight with you, there are a few things a repair will not fix:

  • Leaking fittings, which need a plumber
  • A bath worn all over, where resurfacing makes more sense
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)

If in doubt, send pictures and we’ll say what we think before you book.

Surfaces we repair

  • Whirlpool & spa baths
  • Pressed steel enamel
  • Roll-top & freestanding
  • Cast iron enamel
  • Acrylic
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.