North Somerset · England
Bath chip & crack repair in Milton, North Somerset
Chip and crack repairs to enamel, acrylic and cast iron baths in Milton, carried out at your home and guaranteed for a year.
- Repairs from £95
- Chips along the edge of the bath
- Scuffs and scratches in the surface
Bath repair in Milton without replacing anything
Chips, cracks, rust spots and small holes is repaired in place. There’s no plumbing to disconnect, the tiles are not touched, and the repaired area is colour matched so it blends in. We work on whirlpool & spa baths, roll-top & freestanding and cast iron enamel, and the jobs we see most are an old repair that has yellowed or come loose and hairline or through cracks in acrylic.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Milton (BS22, BS23)
- Area hub
- North Somerset
- Guarantee
- A year, on every repair
- Price
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair isn’t the answer
We’d rather lose a job than do one that won’t last, so these are the limits:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Rust that has eaten right through a steel bath
- A bath worn all over, where resurfacing makes more sense
Not sure? Send pictures and we’ll give you a straight answer before you book.
Materials we work on in Milton
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
What we do, step by step
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Plan for two to three hours for most chips. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the next day.
Before we arrive
- Ensure the room can be ventilated
- Have somewhere for us to park nearby if possible
- Clear the area around the damage
Ask for a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Related advice
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Questions from Milton
When can I have a bath again?
Normally the day after. We will tell you the exact curing time when we finish.
What does bath repair cost?
Repairs from £95. Every job gets a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Is a bath repair durable?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
Is repairing better than replacing?
Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
How soon can you come?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
For landlords and businesses
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
What your bath is made of matters
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
More services for Milton
Milton and nearby
Milton is about 1 mile north of Weston-super-Mare, in North Somerset. Anywhere in BS22, we carry out the work at your property. Our technicians cover all 86 towns and villages across North Somerset, from the larger towns to small villages.
We work across the BS22 and BS23 postcode area. From Farm Road, Furze Road and Ewart Road or a nearby road, a technician can come to you. We also travel to Weston-super-Mare (1 mile south), Worle (1 mile east), Norton (1 mile north), Kewstoke (1 mile north-west) and West Wick (2 miles east). Within a short drive, we also cover Portishead (12 miles north-east), Clevedon (7 miles north-east), Nailsea (9 miles north-east), Yatton (6 miles north-east), Port Marine (12 miles north-east) and Pill (14 miles north-east). Milton is among the bigger towns we cover in North Somerset.
Near you in Milton
Typical jobs here are in homes near North Somerset Enterprise and Technology College, Milton Park Primary School and The Windsor Castle pub and the streets around them. Other local landmarks include North Somerset Enterprise and Technology College (0.6 miles south), St Peter & St Jude (less than half a mile south-east) and Jill's Garden (1.4 miles west). Milton’s nearest station is Weston Milton station, about 0.6 miles south-east. Other landmarks nearby include Castle Batch (1.5 miles north-east) and Lambretta Scooter Museum (1.1 miles south-west). The countryside around Milton includes Worlebury Hill and Blake's Pools.
What affects the price in Milton
Prices start from £95. There’s no area surcharge for Milton. The price reflects:
- Access to the area
- Any earlier repairs that need removing first
- What kind of damage it is
- How many areas need work
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Quotes from your pictures
Two or three clear pictures are generally enough. Try to include:
- What it’s made of, if you know
- Natural light rather than flash
- Your postcode, so we can check dates
- Details of any past repairs
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and we will reply with a fixed price. Quotes are free and you are under no obligation.
Common problems we fix in Milton
Rust generally starts where water sits, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Common reasons people in Milton contact us include:
- Scuffs and scratches in the surface
- Rust spots around the plughole
- A chipped rim or side
- Damage done while the bathroom was being fitted
Comparing quotes
- How changes to the job are handled
- If travel is included in the price
- Whether cleaning and preparation are in the price
- A fixed price, and whether VAT is included
How to look after the repair
After the repair has cured, a few habits help it last:
- Do not leave razors or cans standing in the bath
- Make sure an acrylic bath is firm underfoot
- Cover the bath during DIY or decorating
- Stick to mild cleaners and a soft cloth
Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
About our accreditations · Every repair comes with a one-year guarantee.
