Wiltshire · England
Bath chip & crack repair in Lyneham, Wiltshire
We travel to Lyneham for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Holes from dropped items
- Chips along the edge of the bath
Bath repair in Lyneham without replacing anything
Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Typical jobs include rust spots around the plughole and chips caused by builders, across roll-top & freestanding, acrylic and pressed steel enamel.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Where
- Lyneham (SN15)
- County
- Wiltshire
- Cover
- One year on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Repairing versus replacing in Lyneham
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it’s done in one visit, and nothing else in the room changes. Prices start from £95. Our prices are the same across the UK, so there is no premium for Lyneham. What changes the price is the job itself: the material, the amount of damage and how many items.
Why Lyneham customers choose us
- Colour mixed on the day to match
- One visit for most repairs
- Honest advice, even when it means no job
- Repair technicians who travel to you, UK-wide
Take a look at our full price list or resurfacing vs replacement cost guide.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
What we’re called out for in Lyneham
Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Fittings cause damage too: water sits around them, and any chip there soon rusts.
Common reasons people in Lyneham contact us include:
- Scuffs and scratches in the surface
- A hole punched through by something heavy
- A kit repair that didn’t last
- Rust spots around the plughole
Before you book anyone
- What aftercare is recommended
- Whether they match the colour on site
- How long it needs to cure
- What protection goes down before work starts
Also near Lyneham
More services for Lyneham
How it works
The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the work takes a few hours. Before we leave, we explain the curing time and the aftercare.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the next day.
How to prepare
- Tell us if there are stairs or a lift
- Let us know if it has been repaired before
- Let us know about parking or access
Get a quote
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Related advice
Repairs by material
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour-matched, in much the same way.
FAQs for Lyneham
Do you come to Lyneham?
Yes, we do. We send a technician to Lyneham for every job, with no extra charge for travel.
Is there any odour?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
Is it safe with children and pets around?
Just keep them out of the work area. We will let you know when it’s safe to use again.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
Can you repair a failed DIY repair?
Yes, we do this often. The old material comes out, any rust is treated, then we repair it properly.
What about rust by the waste?
Yes, very often. The rust is cut back to clean metal and sealed before we fill and finish it.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
Can you repair a crack in an acrylic bath?
Frequently, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a photo.
Prices and what affects them
Prices start from £95. We charge the same across the UK, including Lyneham. The price reflects:
- The material and finish
- Any earlier repairs that need removing first
- Unusual colours or finishes
- Doing more than one item at once
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
How to get a fixed price
When you take your photos, a few simple things make all the difference:
- Natural light rather than flash
- Whether it’s been repaired or coated before
- Your postcode, so we can check dates
- A wider photo showing the entire bath
Most customers in Lyneham get their price from pictures. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Landlords, agents and businesses in Lyneham
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Lyneham and nearby
Lyneham is about 5 miles north of Calne, in Wiltshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Lyneham is one of 425 towns and villages in Wiltshire where we work. Our jobs stretch from Lyneham to Birmingham (about 67 miles away).
Every address in SN15 is within our area. You will find streets such as Lancaster Square, Church End Close and Teal Avenue, all of which we cover. If you’re just outside Lyneham, we cover Tockenham (1 mile north-east), Bradenstoke (1 mile west), Tockenham Wick (1 mile north-east), Sodom (2 miles north-west) and Bushton (2 miles east). Further out, we also cover Chippenham (8 miles south-west), Calne (5 miles south), Devizes (11 miles south), Melksham (12 miles south-west), Corsham (11 miles south-west) and Marlborough (12 miles south-east).
Landmarks near Lyneham
Around Lyneham, we work in homes near Church of St Michael and All Angels and Lyneham Primary School and the streets around them. Nearby you’ll also find Lyneham Clack Mount (1.7 miles west). Not far away are Great Wood.
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Avoid scourers, wire wool and gritty cream cleaners
- Clean with warm water and a mild detergent
- Protect the bath with a towel when doing jobs nearby
- Store metal items away from the bath
Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
About our accreditations · Every repair comes with a one-year guarantee.
