Herefordshire · England
Bath Repair for Madresfield homes
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Madresfield, with a one-year guarantee on every repair.
- Repairs from £95
- Snagging damage from a refit
- Holes from dropped items
Bath repair in Madresfield without replacing anything
We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath and the tiles around it. Most baths can be used again the day after. If you’re dealing with chips on the rim or sides and rusty patches near the plughole, we can help.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Location
- Madresfield (WR13)
- Region
- Herefordshire
- Warranty
- One year on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What affects the price in Madresfield
Prices start from £95. There is no charge for travel to Madresfield. The price comes down to:
- How many areas need work
- Previous DIY repairs that have to come out
- Unusual colours or finishes
- The material
The price reflects the work involved, not where you live. The full price is agreed before booking.
Quotes from your photos
Two or three clear photos are generally enough. Try to include:
- Any earlier repairs or coatings
- A close-up of the damage, in focus
- Something in shot to show the size
- Natural light rather than flash
For a price in Madresfield, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Madresfield questions
Do you come to Madresfield?
Yes, we do. We send a technician to Madresfield for every job, with no extra charge for travel.
Are there extra charges for Madresfield?
We do not add a call-out fee. Your fixed price includes everything.
Can you repair a failed DIY repair?
Regularly. The old material comes out, any rust is treated, then we repair it properly.
What areas do you cover?
We cover the whole UK, including Madresfield and the rest of Herefordshire. Just include your postcode and we’ll offer you dates.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Can you repair a chip on a coloured bath?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Can you fix rust around the plughole?
Yes, very often. We take it back to sound metal, seal it, fill it and match the colour.
Places near Madresfield
Other services in Madresfield
What a repair can’t fix
We’ll always be straight with you, so here’s what a repair cannot fix:
- Metal that has corroded all the way through
- Cracks in parts of an acrylic bath we can’t get to from below
- Leaks from the waste or overflow fittings (a plumber’s job)
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we repair
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
Signs you need bath repair in Madresfield
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On enamelled baths, any chip down to the metal will start to rust.
You may need us if you’ve spotted:
- Damage beneath the taps
- Deep scratches in acrylic
- A cracked acrylic bath
- Rust by the waste and overflow
What your quote should include
- Whether they match the colour on site
- Whether there are any call-out or travel charges
- How long it needs to cure
- What happens if they find more damage
What we do, step by step
Arrival times are agreed in advance, so you are not left guessing. On site, it takes a few hours, depending on the damage for most jobs. We leave the room clean and you will know when it can be used.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Mention if the room is upstairs or in a flat
- Keep pets and children out of the room while we work
- Point us to the nearest place to park
Getting a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.
Advice
Repair or replace: which is better?
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. A repair skips all of it. Repairs from £95, with every job priced individually. Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and combining items on one visit brings it down.
What you get with us
- We leave the room as we found it
- One price list for the whole UK
- One visit for most repairs
- Everything repaired in place
Take a look at our prices page or guide to resurfacing and replacement costs.
Materials and what they mean for the repair
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Keeping it looking good
Once the work has cured, treat it gently:
- Get any new chip repaired before it rusts
- If an acrylic bath flexes, have its feet adjusted
- Fix dripping taps early to stop staining and limescale
- Put a towel in the bath if you’re working above it
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine without abrasive products.
Don’t leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
For landlords and businesses
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Madresfield and the surrounding area
Madresfield is about 1 mile north-east of Great Malvern, in Herefordshire. We agree a date that works for you, and we will give you an arrival time in advance, so you are not left waiting in all day. Madresfield is one of 255 towns and villages in Herefordshire we cover. Our jobs stretch from Madresfield to Birmingham (29 miles away).
We work across WR13 and the streets around it. We also cover the places around Madresfield: Newland (1 mile north), Deblin's Green (1 mile north-east), Guarlford (2 miles south-east), Bastonford (2 miles north-east) and Kent's Green (2 miles north-east). We also work in nearby towns such as Ledbury (9 miles south-west), Bromyard (10 miles north-west) and Colwall Stone (4 miles south-west).
What’s near Madresfield
Our customers here include homes close to Dyson Perrins CofE Academy, Church of St Mary and Madresfield CofE Primary School. The nearest railway station is Malvern Link station, roughly 1.2 miles west of the centre. Other landmarks nearby include Malvern Museum of Local History (2 miles south-west) and Worcester Castle (5 miles north-east). Not far away are Brotheridge Green Nature Reserve and End Hill.
About our accreditations · Every repair comes with a one-year guarantee.
