Rhondda Cynon Taff · Wales

Bath chip & crack repair in Maerdy, Rhondda Cynon Taff

Problem with your bath in Maerdy? We repair it in place, mix the colour on the day and guarantee the work for a year.

  • Repairs from £95
  • Chips along the edge of the bath
  • Impact holes in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Maerdy

Bath repair in Maerdy without replacing anything

A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath and the tiles around it. Most baths can be used again the following day. Common call-outs are for chips under the taps and rusty patches near the plughole, across roll-top & freestanding, pressed steel enamel and acrylic.

We stand behind the work with a one-year guarantee, so you are not left on your own once we’ve gone.

Location
Maerdy (CF43)
Region
Rhondda Cynon Taff
Cover
12 months on all our work
Price
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Last updated
23 October 2026
Before and after: a chipped, rust-stained bath around the plughole

Landlord and trade work in Maerdy

Landlords, letting agents and housing providers in Maerdy use us as well as homeowners. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.

Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.

The process

Your technician turns up at the time we agreed with you and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. Most visits take a few hours, depending on the damage, and the room is left clean and tidy.

  1. We start by cleaning the damage and taking out loose enamel and rust.
  2. Next we fill the damage and sand it smooth and level.
  3. We mix the colour on the day to match your bath’s exact shade.
  4. We apply the finish coats and polish the repair so it blends in.
  5. The repair is left to cure, and most baths can be used the day after.

Getting ready for the visit

  • Make sure the area is dry
  • Tell us about any previous repairs or coatings
  • Plan for the room to be out of bounds to pets and children

Getting a price

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them to us. You’ll get a fixed price, not an estimate.

Send pictures for a quote

Related advice

Repair or replace in Maerdy?

If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. If the whole surface is worn, re-enamelling may make more sense, and we’ll tell you. Our bath repair starts from £95. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

Why Maerdy clients choose us

  • Every repair guaranteed for a year
  • Honest advice, even when it means no job
  • Nothing taken out or refitted
  • Colour-matched on site

See our prices page and bath cost comparison.

Common problems we fix in Maerdy

Acrylic baths that crack nearly always have a support problem. Legs that aren’t adjusted, a missing cradle or a soft floor let the bath move.

Signs it’s time to call us include:

  • Snagging damage from a refit
  • Holes from dropped items
  • An old repair that has yellowed or come loose
  • Hairline or through cracks in acrylic

What to look for in a quote

  • What aftercare is recommended
  • Whether cleaning and preparation are in the price
  • Is the price fixed, and does it include VAT?
  • Who turns up on the day

Our hiring checklist

Maerdy and the surrounding area

Maerdy is about 2 miles north of Rhondda, in Rhondda Cynon Taff. Anywhere in CF43, a technician comes to you. Maerdy is one of 133 places in Rhondda Cynon Taff we cover.

We cover every part of the CF43 postcode area. Streets in the area include Station Road, Oxford Street and Wilson Place, all of which we cover. Nearby, we also work in Pentre (1 mile south), Ystradyfodwg (2 miles south), Blaenllechau (2 miles east), Ferndale (2 miles south-east) and Rhondda (2 miles south). We also work in nearby towns such as Aberdare (3 miles north-east), Pontypridd (8 miles south-east), Mountain Ash (5 miles east), Tonypandy (4 miles south), Porth (5 miles south-east) and Church Village (10 miles south-east).

Landmarks near Maerdy

Typical jobs here are in homes near Maerdy Community Primary School, Ferndale Community School and Maerdy Hotel. The nearest railway station is Treorchy station, roughly 1.5 miles south-west of the centre. A little further out are Rhondda (2.9 miles south) and Cynon Valley Museum (3.4 miles north-east). For a walk, there is Ferndale Lake and Mynydd y Ffaldau.

Map of Maerdy © OpenStreetMap contributors

How we price bath repair

Repairs from £95. We give every job a fixed quote from photos. This is what makes a difference:

  • Where the damage is and how we get to it
  • How much damage there is
  • The type of damage
  • Whether we combine several jobs

We charge the same wherever you are, so there is no premium for Maerdy. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Send pictures for a quote

You can take the photos on your phone. Ensure they show:

  • The material, if you know it
  • A close-up of the damage, in focus
  • Details of any past repairs
  • A picture taken from further back

Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.

FAQs for Maerdy

How much does bath repair cost in Maerdy?

Prices start from £95. We give a fixed price from your photos. Send a close-up of the damage and a wider photo and your postcode.

Can you price it without visiting?

Nearly always. If photos don’t show enough, we will ask for another angle.

It’s been repaired before. Can you still fix it?

Generally, yes. Let us know what was used before and we’ll plan for it.

When can I have a bath again?

Normally by the following day, depending on the repair.

Is a holed acrylic bath repairable?

In most cases. Send us a photo of the hole and one from under the bath if you can.

Is it safe with children and pets around?

Just keep them out of the work area. We will let you know when it’s safe to use again.

Is there a call-out fee?

No. Our quotes include travel, with the same prices everywhere we work.

What about rust by the waste?

Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.

How to look after the repair

How the surface is treated afterwards matters:

  • Fix dripping taps early to stop staining and limescale
  • Do not scrub with anything abrasive
  • If an acrylic bath flexes, have its feet adjusted
  • Rinse the bath after use, especially in hard water areas

Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust can start.

If water is getting through a crack, stop using the bath. Water under the bath can damage the floor and the ceiling below.

Should I try a DIY kit first?

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.

Honest limits

In fairness, there are a few things a repair won’t fix:

  • Cracks in parts of an acrylic bath we can’t get to from below
  • Metal that has corroded all the way through
  • A bath that moves underfoot, until its support is fixed

Not sure? Send photos and we will give you a straight answer.

Surfaces we repair

  • Acrylic
  • Pressed steel enamel
  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Cast iron enamel
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.