Pembrokeshire · Wales
Bath Repair in Manorbier Newton
Bath repair for Manorbier Newton, without a refit. Send us photos for a fixed quote, then book a visit.
- Repairs from £95
- Chips along the edge of the bath
- A chip where the taps sit
Bath repair in Manorbier Newton, done in place
You do not need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, with the colour mixed on site so the repair is hard to spot. We regularly repair roll-top & freestanding, cast iron enamel and pressed steel enamel, and the jobs we see most are an old repair that has yellowed or come loose and impact holes in acrylic.
Whatever the size of the job, you get the same one-year guarantee.
- Area
- Manorbier Newton (SA70)
- Region
- Pembrokeshire
- Guarantee
- One year on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Do you need bath repair in Manorbier Newton?
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Contact us if you’ve noticed any of these:
- Scratches you can feel with a fingernail
- Impact holes in acrylic
- Chips on the rim or sides
- A cracked acrylic bath
What your quote should include
- How the colour is matched
- Who will actually do the work
- Whether there are any call-out or travel charges
- What aftercare is recommended
Places near Manorbier Newton
Other services in Manorbier Newton
DIY repairs versus a professional job
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
Repair or replace: which is better?
When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. Where the entire surface is tired, we may suggest re-enamelling instead. Prices start from £95. What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.
What you get with us
- Generally one visit, start to finish
- Rooms protected and left tidy
- Work done at your home or business
- Nothing taken out or refitted
Take a look at our full price list or guide to resurfacing and replacement costs.
Materials and what they mean for the repair
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so repair chips early.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.
Covering Manorbier Newton
Manorbier Newton is about 10 miles east of Milford Haven, in Pembrokeshire. From the centre of Manorbier Newton to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. We cover 223 places in Pembrokeshire.
We work across SA70 and the streets around it. We also travel to Jameston (1 mile south-east), Llandyfai (2 miles west), Freshwater East (2 miles south-west), Milton (2 miles north) and Sageston (2 miles north). Within a short drive, we also cover Haverfordwest (11 miles north-west), Milford Haven (10 miles west), Pembroke (4 miles west), Pembroke Dock (5 miles west), The Marsh (11 miles north-west) and Dinbych-y-Pysgod (5 miles east).
Local landmarks in Manorbier Newton
Typical jobs here are in homes near Swan Lake Inn and Hodgeston Parish Church, among other places. The closest station to Manorbier Newton is Manorbier station, about 1.4 miles east of the centre. A little further out are Carew Cheriton Control Tower (1.9 miles north) and Manorbier Castle (1.7 miles south-east). Green spaces nearby include Stackpole Estate and Norchard Beacon.
How the visit works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a few hours, depending on the damage. We tidy up before we leave and let you know when you can use it again.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- The repair is left to cure, and most baths can be used the day after.
Getting ready for the visit
- Let us know if it has been repaired before
- Let us know which floor the room is on
- Have somewhere for us to park nearby if possible
How to get a price
Most clients in Manorbier Newton get their price from pictures. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Related advice
Prices and what affects them
Prices start from £95. Every quote is fixed and free. What we take into account:
- Access to the area
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
- The size and number of damaged areas
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
Send pictures for a quote
The better the pictures, the more accurate the price. Here’s what helps:
- Daylight if possible, and no flash reflection
- Something in shot to show the size
- A clear, close picture of the problem area
- A wider photo showing the whole bath
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed quote back. Quotes are free and no obligation.
Landlord and trade work in Manorbier Newton
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
Looking after it afterwards
Simple care helps the repair last. Our advice:
- Do not scrub with anything abrasive
- Keep metal cans and razors off the surface
- Put a towel in the bath if you are working above it
- Get any new chip repaired before it rusts
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust can start.
If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.
Manorbier Newton questions
Do you come to Manorbier Newton?
Yes. We cover the entire UK and come to Manorbier Newton. Send photos and we’ll quote, or call 0345 017 0787.
What information do you need?
Use the quote form or ring 0345 017 0787.
Can you do more than one item on the same visit?
Of course, and it usually saves money. Send pictures of everything together and you’ll get one combined price.
When can I have a bath again?
Normally by the following day, depending on the repair.
Is there a guarantee?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
About our accreditations · Every repair comes with a one-year guarantee.
