Wiltshire · England
Bath chip & crack repair in Manton, Wiltshire
Fixed-price bath repair in Manton and the surrounding area, done in a single visit in most cases.
- Repairs from £95
- Chips on the rim or sides
- Scratches you can feel with a fingernail
How the visit works
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes two to three hours for most chips, and we finish with a tidy-up and a look at the finished work together.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
Before we arrive
- Keep children and pets away from the room on the day
- Let the surface dry out before the visit
- Move bottles, mats and clutter away from the area
Get a quote
For a price in Manton, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Related advice
Bath repair in Manton, done in place
We see every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. All of it is repaired where the bath stands. Whether it’s chips on the rim or sides and deep scratches in acrylic, we can help, on acrylic, cast iron enamel and roll-top & freestanding alike.
The work is covered for a year after we finish. If anything is not right, ring us and we will come back.
- Area
- Manton (SN8)
- Area hub
- Wiltshire
- Guarantee
- One year on every repair
- Quote
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Other services in Manton
What your bath is made of matters
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so repair chips early.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Repairing versus replacing in Manton
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it takes one visit, and the bathroom stays exactly as it is. Prices start from £95. What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your photos, so you know the cost before booking.
Why choose Surface Doctor in Manton
- A fixed quote before you book
- Normally one visit, start to finish
- Nothing taken out or refitted
- Colours mixed by hand to suit your surface
Read our full price list or guide to resurfacing and replacement costs.
What we’re called out for in Manton
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, frequently before anyone notices. We repair snagging damage like this regularly.
Send us a photo if you notice any of these:
- Damage done while the bathroom was being fitted
- A chip where the taps sit
- Rusty patches near the plughole
- A hole punched through by something heavy
Questions to ask before you book
- What happens if they find more damage
- How the colour is matched
- Whether the price is fixed and includes VAT
- If travel is included in the price
Where we work around Manton
Manton is about 10 miles south of Swindon, in Wiltshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Manton is one of 425 towns and villages in Wiltshire we cover. We work right across the region, from Manton to London (about 72 miles away).
Here we cover the SN8 postcode area. Jobs here include addresses on High Street, School Lane and West Manton. Neighbouring places we cover include Clatford (1 mile west), Marlborough (1 mile east), Lockeridge (1 mile west), Fyfield (1 mile west) and Ogbourne Maizey (2 miles north-east). Larger places within reach include Calne (11 miles west), Devizes (11 miles south-west), Bulford (15 miles south), Pewsey (5 miles south), Durrington (15 miles south) and Lyneham (11 miles north-west).
What’s near Manton
We visit homes around St John's Marlborough, St John's Marlborough and The Oddfellows Public House. You will also find Church of St George (0.6 miles east) and Preshute Church of England Primary School (less than half a mile east). A little further out are Marlborough Castle (0.8 miles east) and Savernake Hospital (2.2 miles east). Not far away are Overton Hill.
- Parks and local facilities nearby include Marlborough and Ramsbury Rural District (1.2 miles east)
Landlord and trade work in Manton
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We work for landlords, letting agents and housing providers in Manton as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
What a repair can’t fix
Some jobs are not right for a repair, including:
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Flexing caused by a failed cradle or loose feet
- Rust that has eaten right through a steel bath
Send us pictures and we’ll tell you honestly.
What we work on
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
Keeping it looking good
So the finish stays in good condition:
- Don’t leave a fresh chip for long
- Avoid scourers, wire wool and gritty cream cleaners
- Cover the bath during DIY or decorating
- Fix dripping taps early to stop staining and limescale
Do not leave razors, cans or hair grips in the bath, because they can mark the enamel. A dripping tap should be fixed early, too.
Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and it can start to leak underneath.
Your questions about bath repair in Manton
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
How long before I can use the bath?
Most baths can be used the next day. We’ll tell you the exact curing time when we finish.
Do you work in Manton?
We do. We send a technician to Manton for every job, with no extra charge for travel.
Can a cracked acrylic bath be fixed?
Generally, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a photo.
Is repairing better than replacing?
Usually, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
About our accreditations · Every repair comes with a one-year guarantee.
