Birmingham · England
Bath chip & crack repair in Marston, Birmingham
Bath repair in Marston without the cost of replacing. Get a fixed price from your photos, then book a visit.
- Repairs from £95
- Cracks in an acrylic bath
- Rust by the waste and overflow
Bath repair at your home in Marston
A typical bath repair is a few hours’ work, and the bath is back in use the next day. There is no need to book a plumber or tiler, because nothing is disconnected. Common call-outs are for a cracked acrylic bath and scratches you can feel with a fingernail, in whirlpool & spa baths, roll-top & freestanding and cast iron enamel.
Big or small, you get the same one-year guarantee in Marston and across Birmingham.
- Location
- Marston (B76)
- County
- Birmingham
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How we price bath repair
Prices start from £95. We price every job individually, from your photos. What matters most is:
- Any earlier repairs that need removing first
- Access to the area
- How much damage there is
- The material
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
How to get a fixed quote
Almost every job we do is priced from pictures. This is what we need:
- Something in shot to show the size
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
For a price in Marston, pictures are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Honest limits
It helps to know what we cannot do too:
- A steel bath rusted through
- Leaking fittings, which need a plumber
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Not sure? Send photos and we’ll give you a straight answer before booking.
Surfaces we repair
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
What happens on the day
We agree an arrival time beforehand, so you are not left guessing. On site, it takes a morning or an afternoon. The room is left tidy and you’ll know when it can be used.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, generally by the next day, the bath is ready to use.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Plan for the room to be out of bounds to pets and children
- Have somewhere for us to park nearby if possible
Ask for a price
Email us a picture of the damage and a wider shot of the whole item, with your B76 postcode, and we will reply with a fixed price.
Read more
Towns and villages near Marston
More services for Marston
Marston questions
Can pets and children be at home?
On the day, the room should be kept clear of pets and children.
Can you quote from pictures?
In nearly every case. We only ask to see it in person if the pictures can’t show what we need.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. We tint the finish to your bath on site.
Can you repair something that’s been repaired before?
Usually, yes. The old repair comes out first.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
How long does the repair take to cure?
Generally the next day. We’ll tell you the exact curing time when we finish.
Aftercare tips
Much of the damage we repair could have been avoided. A few tips:
- If an acrylic bath flexes, have its feet adjusted
- Give the bath a quick rinse after use
- Protect the bath with a towel when doing jobs nearby
- Store metal items away from the bath
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Remove it before the repair.
Marston and the surrounding area
Marston is about 5 miles south of Tamworth, in Birmingham. We travel to homes and businesses in Marston and the surrounding area, so there’s no workshop to go to. We cover 140 places in Birmingham. You can also see our page for Birmingham, about 10 miles away.
Our visits in B76 work the same way as everywhere else we cover. Whether you live on Hollands Croft Lane, Old Kingsbury Road and Bodymoor Heath Lane or anywhere nearby, we can come to you. If you’re just outside Marston, we cover Lea Marston (1 mile south), Kingsbury (1 mile north-east), Whitacre Heath (1 mile south-east), Cliff (2 miles north) and Hoggrill's End (2 miles south-east). Further out, we also cover Birmingham (10 miles south-west), Royal Sutton Coldfield (5 miles west), Erdington (6 miles west), Lee Bank (10 miles south-west), Cape Hill (12 miles west) and Streetly (8 miles west).
What’s near Marston
We visit homes around Kingsbury School, Kingsbury Water Park and Dog & Doublet Inn, among other places. The nearest railway station is Coleshill Parkway station, roughly 2.5 miles south of the centre. Nearby you will also find Kingsbury Hall (1 mile north) and Robert Peel Society & Police Museum (2.3 miles north-west). Green spaces nearby include Ladywalk Reserve.
For landlords and businesses
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
For anyone letting property in or around Marston, we will quote for several properties at once. Send photos for each one and we will price them together.
Repair or replace in Marston?
Replacing a bath rarely stops at the bath: tiles along the rim usually crack when it comes out, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. A repair skips all of it. Our bath repair starts from £95. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why us?
- One price list for the entire UK
- We come to you, anywhere in the UK
- We will tell you if it’s not worth repairing
- Most jobs done in one visit
Take a look at our full price list and resurfacing vs replacement cost guide.
Do you need bath repair in Marston?
Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
It’s worth getting a quote if you see:
- Scuffs and scratches in the surface
- A chip where the taps sit
- A chipped rim or side
- A hole punched through by something heavy
Comparing quotes
- Whether the price covers travel
- Who turns up on the day
- What prep work is covered
- Is the price fixed, and does it include VAT?
Materials and what they mean for the repair
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
About our accreditations · Every repair comes with a one-year guarantee.
