Pembrokeshire · Wales
Bath chip & crack repair in Martletwy, Pembrokeshire
Local bath repair for Martletwy: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- A failed DIY repair that is discoloured or lifting
- Chips along the edge of the bath
How we handle bath repair in Martletwy
Most of our bath repairs take a few hours, and you can usually bathe again the day after. There is no need to book a plumber or tiler, because the bath doesn’t move. Our repair technicians work on pressed steel enamel, whirlpool & spa baths and acrylic, and common reasons people get in touch are an old repair that has yellowed or come loose and chips under the taps.
The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll sort it.
- Area
- Martletwy (SA67)
- County
- Pembrokeshire
- Cover
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Signs you need bath repair in Martletwy
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
People normally call us after spotting one of these:
- Rust spots around the plughole
- Snagging damage from a refit
- Cracks in an acrylic bath
- Chips along the edge of the bath
Comparing quotes
- Aftercare advice
- Whether the price is fixed and includes VAT
- How the colour is matched
- What the guarantee covers, and for how long
For landlords and businesses
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Landlords, letting agents and housing providers in Martletwy use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
When a repair is not the answer
We would rather lose a job than do one that will not last, so these are the limits:
- A bath worn all over, where resurfacing makes more sense
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Leaking fittings, which need a plumber
If in doubt, send pictures and we’ll say what we think before you book.
Materials we repair
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Cast iron enamel
Different materials, different repairs
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.
Your questions about bath repair in Martletwy
Can you redo someone else’s repair?
Yes, we frequently do. Removing the old work can add time, and that’s in the quote.
Is repairing better than replacing?
Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Is a holed acrylic bath repairable?
Normally, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you come to Martletwy?
We do. Repair technicians travel to Martletwy from across the region, and the price is the same as everywhere else.
Is there any odour?
A little, depending on the job. Ventilation keeps it to a minimum.
Is my repair covered?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
How quickly can you book me in?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
Our work in Martletwy
Martletwy is about 6 miles south-east of Haverfordwest, in Pembrokeshire. From the centre of Martletwy to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We cover all 223 towns and villages in Pembrokeshire, from the larger towns to small villages.
We cover every part of the SA67 postcode area. Close by, we cover Lawrenny (2 miles south), Llangwm (3 miles west), Port Lion (3 miles south-west), Deerland (3 miles west) and Cresselly (3 miles south-east). We also work in nearby towns such as Haverfordwest (6 miles north-west), Milford Haven (8 miles west), Pembroke (7 miles south-west), Pembroke Dock (6 miles south-west), The Marsh (6 miles north-west) and Dinbych-y-Pysgod (9 miles south-east).
Landmarks near Martletwy
Our customers here include homes close to Church of St. Marcellus, among other places. Other landmarks nearby include Martletwy Upper Castle and Hallwalls (less than half a mile west) and Picton Castle (2.3 miles north-west). Not far away are Lawrenny Hill and Slebech Park Lake.
What happens on the day
Visits start with a quick look at the job together. After that, protection goes down around the work area and we start. Allow two to three hours for most chips, and we will keep you posted as we go.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
How to prepare
- Keep a parking space free if you can
- Keep children and pets away from the room on the day
- Open a window if you can
How to get a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Related advice
What else we do in Martletwy
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Repair or replace in Martletwy?
A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Prices start from £95. We charge the same wherever you are, with no extra for Martletwy. What changes the price is the job itself: the material, the amount of damage and how many items.
Why Martletwy customers choose us
- Colour-matched on site
- Work done at your home or business
- CHAS, Constructionline and SafeContractor accredited
- Same prices wherever you are
See our prices page and bath cost comparison.
How we price bath repair
Repairs from £95. We give every job a fixed price from photos. These are the things that affect it:
- What the surface is made of
- Unusual colours or finishes
- How easy the damage is to reach
- How much damage there is
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Getting a price from photos
You can usually get a fixed price without us visiting. To help us price it:
- The postcode, so we can plan the visit
- One sharp close-up of the damage
- Natural light rather than flash
- A coin or ruler next to the damage for scale
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
About our accreditations · Every repair comes with a one-year guarantee.
