Cheshire West and Chester · England

Bath chip & crack repair in Marton, Cheshire West and Chester

Local bath repair for Marton: photo quotes, tidy work and a year’s guarantee.

  • Repairs from £95
  • Chips along the edge of the bath
  • Rust by the waste and overflow
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Marton?

Bath repair in Marton without replacing anything

A damaged bath doesn’t have to mean a new bathroom. We fill the damage, shape it to the curve of the bath and refinish it, with the colour mixed on site. If you are dealing with cracks in an acrylic bath and a failed DIY repair that’s discoloured or lifting, we can help, on acrylic, roll-top & freestanding and whirlpool & spa baths alike.

You get a one-year guarantee, the same in Marton as everywhere else we work.

Before and after: a chipped, rust-stained bath around the plughole
Area
Marton (CW7, CW8)
Area hub
Cheshire West and Chester
Warranty
One year on every repair
Quote
From £95. Free and fixed, from your photos
Call
0345 017 0787
Updated
23 October 2026

Work for landlords and builders

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

We carry out planned and one-off repairs for housing associations and facilities teams in Cheshire West and Chester and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Signs you need bath repair in Marton

Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, and the damage is not always spotted until later. Snagging repairs like these are a regular job for us.

Look out for any of the following:

  • A kit repair that didn’t last
  • Rust by the waste and overflow
  • Damage done while the bathroom was being fitted
  • Deep scratches in acrylic

Questions to ask before you book

  • If travel is included in the price
  • The length of the guarantee and what it covers
  • Is the price fixed, and does it include VAT?
  • Whether they match the colour on site

Choosing a repair company

Keeping it looking good

Good habits make a big difference to how long a repair lasts. Here’s what we suggest:

  • Avoid scourers, wire wool and gritty cream cleaners
  • Use a soft cloth and washing-up liquid for everyday cleaning
  • Do not leave razors or cans standing in the bath
  • Ensure an acrylic bath is firm underfoot

Give the repair the full curing time we recommend before using the bath. After that, gentle cleaning keeps it looking good.

Until we visit, a strip of waterproof tape over the damage helps, so water cannot get in. Take it off before we arrive.

Marton: your questions answered

What does bath repair cost?

Prices start from £95. We give a fixed quote from your photos. Send a close-up of the damage and a wider photo and your postcode.

Can you price it without visiting?

Normally, yes. Clear photos let us give you a fixed quote without visiting.

What happens next?

You will get a fixed quote back, typically with dates to choose from. You are under no obligation.

How do I book?

Just pictures, your postcode and a contact number. On the day, access to the room.

Does someone need to be in?

Yes. We need access to the room while we work, at a time that suits you.

Is a repair better than a new one?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.

It’s been repaired before. Can you still fix it?

Typically, yes. The old repair comes out first, so mention it when you send photos.

Repair or replace: which is better?

Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. A repair keeps it in place. Repairs from £95, with every job priced individually. A repair usually costs much less than people expect, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.

Why book with us

  • Work done at your home or business
  • Colour mixed on the day to match
  • Normally one visit, start to finish
  • CHAS and Constructionline accredited

Take a look at our pricing and bath cost comparison.

What we do, step by step

You don’t need to empty the room beforehand. Everything we use comes in the van with us, put protection down and start once you are happy with the plan. It generally takes a few hours, and you can get on with other things while we’re there.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. Next we fill the damage and sand it smooth and level.
  3. The colour is mixed on the spot to match your bath.
  4. We apply the finish coats and polish the repair so it blends in.
  5. Once it has cured, typically by the day after, the bath is ready to use.

Getting ready for the visit

  • Have somewhere for us to park nearby if possible
  • Open a window if you can
  • Keep children and pets away from the room on the day

Ask for a price

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. What comes back is a fixed price, not a guess.

Send photos for a quote

Read more

When we’d advise against a repair

We will always be straight with you, so here’s what a repair won’t do:

  • Leaking fittings, which need a plumber
  • A steel bath rusted through
  • Cracks in parts of an acrylic bath we can’t get to from below

If in doubt, send photos and we’ll say what we think.

What we work on

  • Acrylic
  • Pressed steel enamel
  • Roll-top & freestanding
  • Cast iron enamel
  • Whirlpool & spa baths

Covering Marton

Marton is about 2 miles north-west of Winsford, in Cheshire West and Chester. Book a date that suits you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. Our technicians cover 224 places across Cheshire West and Chester. We work right across the region, from Marton to Liverpool (20 miles away).

Our repair technicians cover all of the CW7 and CW8 postcode area and the streets around it. That includes homes on Cassia Lane, Dalefords Lane and Cassia Green Lane and the roads around them. Nearby, we also work in Foxwist Green (1 mile north), Nova Scotia (1 mile north-west), Whitegate (1 mile north-east), Daleford (1 mile north-west) and Meadowbank (2 miles east). Further out, we also cover Chester (13 miles west), Ellesmere Port (15 miles west), Northwich (4 miles north-east), Boughton (13 miles west), Frodsham (9 miles north-west) and Hoole (12 miles west).

Local landmarks in Marton

Typical jobs here are in homes near St Mary's Church, Whitegate CofE Primary School and Abbotts Moss Nature Reserve and the streets around them. The nearest railway station is Hartford station, about 2.4 miles north. Other landmarks nearby include Northwich Infirmary (4.2 miles north-east).

Map of Marton © OpenStreetMap contributors

What bath repair costs

Repairs from £95. There’s no charge for travel to Marton. The price comes down to:

  • How easy the damage is to reach
  • Any earlier repairs that need removing first
  • What the surface is made of
  • How many areas need work

Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.

Getting a price from pictures

Photographing the damage takes a minute. Please include:

  • Where you are, by postcode
  • One picture of the entire bath
  • Whether it’s been repaired or coated before
  • What it’s made of, if you know

Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.

Should I try a DIY kit first?

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.