Norfolk · England
Shower Tray Repair in Matlaske
Our technicians come to Matlaske for shower tray chip, crack and scratch repairs and resurfacing. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Chipped corners or rims
- A tray that flexes
Should you replace it?
Replacing a tray generally means refitting the screen, retiling and resealing. Repairing it avoids all of that, at a fraction of the cost. Repairs from £95, with every job priced individually. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Why choose Surface Doctor in Matlaske
- Typically one visit, start to finish
- Free fixed quotes from pictures
- Accredited with CHAS, Constructionline and SafeContractor
- No need to remove anything
See our prices page.
Shower tray repair at your home in Matlaske
We repair cracks, chips and scratches in stone resin, acrylic and ceramic trays, and worn trays can be resurfaced completely. The tray stays in place, so the enclosure and tiles are not disturbed. Our repair technicians work on stone resin, ceramic and cast iron, and people most frequently call us about a tray that flexes and a damaged area around the waste.
Every repair comes with our one-year guarantee.
- Where
- Matlaske (NR11)
- County
- Norfolk
- Guarantee
- 12 months on all our work
- Price
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
When we would advise against a repair
Some jobs aren’t right for a repair, for example:
- A tray broken in more than one place
- Leaking waste fittings
- Water damage to the floor beneath the tray
If in doubt, send photos and we will say what we think before booking.
Materials we repair
- Ceramic
- Cast iron
- Acrylic
- Stone resin
- Enamelled steel
How the visit works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, and get on with the job, which normally takes a few hours, or most of a day for a full resurface. If anything looks different from your pictures, we will talk to you before going ahead.
- We protect the floor and the enclosure.
- Any sealant in the way is cut out.
- The tray is cleaned, keyed and repaired.
- The surface is refinished to match.
- We clean up and give you the curing time.
How to prepare
- Point us to the nearest place to park
- Clear the area around the damage
- Tell us if there are stairs or a lift
Getting a price
For a price in Matlaske, photos are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Read more
Prices and what affects them
Prices start from £95. There is no charge for travel to Matlaske. The price depends on:
- Doing more than one item at once
- Where the damage is and how we get to it
- The size and number of damaged areas
- Unusual colours or finishes
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Send pictures for a quote
You can take the pictures on your phone, there is no need for anything special. Just ensure we can see:
- A picture taken from further back
- Where you are, by postcode
- Whether it’s been repaired or coated before
- Natural light rather than flash
Most clients in Matlaske get their price from photos. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
What we’re called out for in Matlaske
Heavy bottles, shower heads and dropped razors chip trays, typically on the edges or near the plughole.
Send us a photo if you notice any of these:
- Scratches from cleaning or grit
- Chips caused during fitting
- Chips or cracks by the plughole
- Cracks running from the waste
Questions to ask before you book
- Whether cleaning and preparation are in the price
- Is the price fixed, and does it include VAT?
- What aftercare is recommended
- When it can be used again
Materials and what they mean for the repair
Stone resin
Stone resin is a dense, rigid material with a smooth gel coat. Poor support underneath leads to cracks, and chips are filled and matched to the surface.
Enamelled steel
Steel trays have an enamel surface like a steel bath. Chips can rust if they’re left, so early repairs help.
Common questions in Matlaske
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we’re working in. We’ll tell you when the room can be used again.
It’s been repaired before. Can you still fix it?
Yes, we often do. It can add a little time, which we include in the quote.
Is there a guarantee?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
How do I book?
Use the quote form or ring 0345 017 0787, and we will do the rest.
What happens if you find more damage?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Matlaske.
Can tenants book a repair?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Our work in Matlaske
Matlaske is about 9 miles west of North Walsham, in Norfolk. We travel to clients in Matlaske and the surrounding area, so you do not need to take anything anywhere. Matlaske is one of 797 towns and villages in Norfolk where we work.
Every address in NR11 is covered, from the main roads to the quietest streets. Close by, we cover Little Barningham (1 mile south-west), Plumstead (1 mile west), Baconsthorpe (2 miles north-west), Itteringham (2 miles south) and Hempstead (3 miles north-west). Within a short drive, we also cover North Walsham (9 miles east), Sheringham (5 miles north), Taverham (13 miles south), Cromer (6 miles north-east), Fakenham (14 miles west) and Aylsham (6 miles south-east).
Near you in Matlaske
In Matlaske, that means homes near Church of St Peter, among other places. Nearby you will also find Bessingham Moat Yard (1.8 miles north-east). Not far away are Beacon Hill.
Looking after it afterwards
Looking after the surface is easy:
- Keep the bathroom well ventilated
- Report any creaking or movement early
- Keep harsh chemicals off the tray
- Give the tray a quick rinse after use
Rinse the tray down after showering, clean with mild cleaners, and keep the sealant in good condition so water cannot get underneath.
Don’t keep using a cracked tray. Water may be getting under the tray, where it causes damage you cannot see.
Landlords, agents and businesses in Matlaske
We’re used to working with agents and managing companies. Send the address, pictures and access details and we’ll arrange it.
If you manage property in Matlaske, we can repair and quote for several addresses together. Send pictures for each one and we will price them together.
Nearby places to Matlaske
What else we do in Matlaske
About our accreditations · Every repair comes with a one-year guarantee.
